acer aspire 1351_1353_1355_1356 quanta_zp1 schematic
acer aspire 1351_1353_1355_1356=1=quanta_zp1_card_reader_rev3a.pdf
acer aspire 1356=1=quanta_zp1_led_board_rev3d.pdf
acer aspire 1356=1=quanta_zp1_rev3h.pdf
acer aspire 1356=1=quanta_zp1_touch_pad_rev3b.pdf
acer aspire 1356=1=quanta_zp1_tv_out_lvds_rev3b.pdf
Technical Specifications
Technical Summary
The Quanta ZP1 MS BOARD (Project ZP1, Board Number 36ZP1RB0005, Revision 3A) is a motherboard-level design dated July 16, 2003, under Document Number 204. The board integrates a ST7265 microcontroller serving as both the Embedded Controller (EC/KBC) and the 4-in-1 Card Reader controller, supporting SD, MMC, Memory Stick, and SmartMedia formats. The ST7265 is housed in a 64-pin package and supports In-System Programming (ISP) for firmware updates while the system is in a working state. The design includes a 12MHz crystal oscillator (Y1) for timing, a polyfuse (F1) for overcurrent protection on the card reader power rail, and an optional EEPROM (U3, M2402-W) for OEM-specific VID/PID configuration. The board also features a ST662A charge pump (U2) for Vpp generation and a DTA124EU transistor (Q3) for card detection logic.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The board uses a ST7265 microcontroller in a 64-pin package, which also functions as the 4-in-1 Card Reader controller.
Q: Is the EC/KBC programmable on this motherboard?
A: Yes, the ST7265 supports ISP (In-System Programming) burn programming while the system is in a working state.
Q: What card reader formats are supported?
A: The ST7265-based 4-in-1 Card Reader supports SD, MMC, Memory Stick (MS), and SmartMedia (SMC) formats.
Q: What is the board number and revision?
A: The board number is 36ZP1RB0005, Revision 3A, under Project ZP1 from Quanta Computer Inc.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
Technical Summary
This document is for the Quanta Computer Inc. ZP1 LED Board, a sub-board under Project ZP1. The PCB carries board number 33ZP1LB0000 and is at revision 3D, with a document number of 204. The board was released on August 28, 2003, and includes a revision history referencing ECN changes from May to August 2003. The board integrates LED indicators for IDE, NUM, CAPS, MAIL, and WIRELESS activity, along with Bluetooth and wireless switches, a lid connector, and a board-to-board connector (CN2). The design includes multiple green LEDs and switch inputs for user interaction.
Technician FAQ
Q: What is the board number for this ZP1 LED Board?
A: The PCB board number is 33ZP1LB0000.
Q: What is the project code and revision of this board?
A: The project code is ZP1, and the board revision is 3D.
Q: What is the document number for this schematic?
A: The document number is 204.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
Technical Summary
The Quanta ZP1 M/B BOARD (31ZP1MB0002, Rev 3H) is an AMD Socket A platform built around the VIA KN400 Northbridge and VT8235 Southbridge. The system block diagram confirms DDR DIMM memory architecture with two slots, UltraDMA 100/133 storage, and USB 2.0 connectivity. Graphics processing is handled by an ATI M9+ GPU via the AGP bus, with an external VGA option and CH7019 TV encoder and LVDS transmitter. The EC/KBC is a PC87570, and the audio subsystem uses a Realtek ALC202 AC'97 codec with a G1421 amplifier. Networking is provided by a VIA VT6103 LAN PHY. The clock generation is managed by an ICS950902, which also serves as the charging IC. Additional I/O includes a TSB43AB21 IEEE 1394 controller, a TI1410 card reader, and a PC87393 Super I/O. The board date is September 16, 2003, with project code ZP1.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The EC/KBC is a PC87570.
Q: What is the CPU platform and socket type?
A: The CPU platform is AMD Processor (Socket A).
Q: What audio codec and amplifier are used?
A: The audio codec is a Realtek ALC202, and the audio amplifier is a G1421.
Q: What is the memory architecture?
A: The memory architecture is DDR DIMM with two slots.
Q: What is the graphics configuration?
A: The graphics subsystem uses an ATI M9+ GPU on the AGP bus, with an external VGA option and a CH7019 TV encoder and LVDS transmitter.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
Technical Summary
This Quanta Computer Inc. ZP1 TouchPAD Board, documented under project ZP1, carries board number 32ZP1TP0007 at revision 3B, dated August 6, 2003. The document number is 204. The board integrates touchpad interface signals TP_CLK and TP_DATA, along with status indicators including PWR_LED, BATUSE_LED, BLUETOOTH_LED, WIRELESS_LED, and BATCHG_LED. Navigation switches SCROLL_UP, SCROLL_DOWN, SCROLL_LEFT, and SCROLL_RIGHT are present, as well as LEFT_SW and RIGHT_SW. Power rails include 5VPCU, 5VSUS, and 5V. The board uses an E&T 6902-10P connector at CN1 and an ACES 87216-1802 connector at CN2.
Technician FAQ
Q: What is the board number and revision for this ZP1 TouchPAD Board?
A: The board number is 32ZP1TP0007, revision 3B.
Q: What connectors are used on this board?
A: CN1 is an E&T 6902-10P connector, and CN2 is an ACES 87216-1802 connector.
Q: What power rails are present on this board?
A: The power rails include 5VPCU, 5VSUS, and 5V.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
Technical Summary
This Quanta Computer Inc. ZP1 TV-OUT BOARD, project code ZP1, is documented under board number 34ZP1TB0002 and document number 204, revision 3B, dated 08/06/2003. The board is designed as a TV-Out interface daughterboard, featuring a CH7019 TV encoder IC for video signal processing. The schematic details the integration of the TV-Out interface with an AGP 4X/8X I/F and keyboard connector, utilizing a Foxconn QTS1120A-1021 connector for the keyboard interface and an E&T 6900-24P connector for the TV-Out interface. The board operates on 1.5V and 3V power rails and includes a 14.318MHz crystal oscillator for clock generation. The CH7019 encoder supports both NTSC and PAL TV formats, with its default I2C address configurable via resistor stuffing options.
Technician FAQ
Q: What is the board number and revision for this TV-Out board?
A: The board number is 34ZP1TB0002, revision 3B, dated 08/06/2003.
Q: What TV encoder IC is used on this board?
A: The board uses a CH7019 TV encoder IC.
Q: What TV formats does the CH7019 encoder support?
A: The CH7019 supports NTSC and PAL TV formats, configurable via the GPIO0 pin and resistor R13 stuffing.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
acer aspire 1351_1353_1355_1356=1=quanta_zp1_card_reader_rev3a.pdf
acer aspire 1356=1=quanta_zp1_led_board_rev3d.pdf
acer aspire 1356=1=quanta_zp1_rev3h.pdf
acer aspire 1356=1=quanta_zp1_touch_pad_rev3b.pdf
acer aspire 1356=1=quanta_zp1_tv_out_lvds_rev3b.pdf
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Quanta Computer Inc. |
| Model | ZP1 MS BOARD |
| Motherboard Manufacturer | Quanta Computer Inc. |
| Project Code | ZP1 |
| Board Number | 36ZP1RB0005 |
| Revision | 3A |
| Date | 07/16/2003 |
| Document Number | 204 |
| EC / KBC | ST7265 |
| EC/KBC Package | 64-pin |
| EC/KBC Programmable | ISP burn programming supported |
| Card Reader IC | ST7265 |
| Card Reader Architecture | 4-in-1 Card Reader (SD, MMC, MS, SMC) |
Technical Summary
The Quanta ZP1 MS BOARD (Project ZP1, Board Number 36ZP1RB0005, Revision 3A) is a motherboard-level design dated July 16, 2003, under Document Number 204. The board integrates a ST7265 microcontroller serving as both the Embedded Controller (EC/KBC) and the 4-in-1 Card Reader controller, supporting SD, MMC, Memory Stick, and SmartMedia formats. The ST7265 is housed in a 64-pin package and supports In-System Programming (ISP) for firmware updates while the system is in a working state. The design includes a 12MHz crystal oscillator (Y1) for timing, a polyfuse (F1) for overcurrent protection on the card reader power rail, and an optional EEPROM (U3, M2402-W) for OEM-specific VID/PID configuration. The board also features a ST662A charge pump (U2) for Vpp generation and a DTA124EU transistor (Q3) for card detection logic.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The board uses a ST7265 microcontroller in a 64-pin package, which also functions as the 4-in-1 Card Reader controller.
Q: Is the EC/KBC programmable on this motherboard?
A: Yes, the ST7265 supports ISP (In-System Programming) burn programming while the system is in a working state.
Q: What card reader formats are supported?
A: The ST7265-based 4-in-1 Card Reader supports SD, MMC, Memory Stick (MS), and SmartMedia (SMC) formats.
Q: What is the board number and revision?
A: The board number is 36ZP1RB0005, Revision 3A, under Project ZP1 from Quanta Computer Inc.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Quanta Computer Inc. |
| Model | ZP1 LED BOARD |
| Motherboard Manufacturer | Quanta Computer Inc. |
| Project Code | ZP1 |
| Board Number | 33ZP1LB0000 |
| Revision | 3D |
| Date | 08/28/2003 |
| Document Number | 204 |
| PCB Number | 33ZP1LB0000 |
Technical Summary
This document is for the Quanta Computer Inc. ZP1 LED Board, a sub-board under Project ZP1. The PCB carries board number 33ZP1LB0000 and is at revision 3D, with a document number of 204. The board was released on August 28, 2003, and includes a revision history referencing ECN changes from May to August 2003. The board integrates LED indicators for IDE, NUM, CAPS, MAIL, and WIRELESS activity, along with Bluetooth and wireless switches, a lid connector, and a board-to-board connector (CN2). The design includes multiple green LEDs and switch inputs for user interaction.
Technician FAQ
Q: What is the board number for this ZP1 LED Board?
A: The PCB board number is 33ZP1LB0000.
Q: What is the project code and revision of this board?
A: The project code is ZP1, and the board revision is 3D.
Q: What is the document number for this schematic?
A: The document number is 204.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Quanta Computer Inc. |
| Model | ZP1 M/B BOARD |
| Motherboard Manufacturer | Quanta Computer Inc. |
| Project Code | ZP1 |
| Board Number | 31ZP1MB0002 |
| Revision | 3H |
| Date | 09/16/2003 |
| Document Number | 204 |
| CPU Platform | AMD Processor (Socket A) |
| PCH / Southbridge | VIA VT8235 |
| Northbridge | VIA KN400 |
| GPU Type | ATI M9+ |
| EC / KBC | PC87570 |
| Audio Codec | Realtek ALC202 |
| LAN IC | VIA VT6103 |
| Charging IC | ICS950902 |
| Clock Generator | ICS950902 |
| Super I/O | PC87393 |
| IEEE 1394 Controller | TSB43AB21 |
| Card Reader IC | TI1410 |
| TV Encoder & LVDS | CH7019 |
| Audio Amplifier | G1421 |
| RAM Type | DDR |
| RAM Architecture | DDR DIMM |
| RAM Quantity / Slots | 2 |
| Storage Interface | UltraDMA 100/133 |
| USB Interface | USB 2.0 |
| Graphics Architecture | AGP BUS |
Technical Summary
The Quanta ZP1 M/B BOARD (31ZP1MB0002, Rev 3H) is an AMD Socket A platform built around the VIA KN400 Northbridge and VT8235 Southbridge. The system block diagram confirms DDR DIMM memory architecture with two slots, UltraDMA 100/133 storage, and USB 2.0 connectivity. Graphics processing is handled by an ATI M9+ GPU via the AGP bus, with an external VGA option and CH7019 TV encoder and LVDS transmitter. The EC/KBC is a PC87570, and the audio subsystem uses a Realtek ALC202 AC'97 codec with a G1421 amplifier. Networking is provided by a VIA VT6103 LAN PHY. The clock generation is managed by an ICS950902, which also serves as the charging IC. Additional I/O includes a TSB43AB21 IEEE 1394 controller, a TI1410 card reader, and a PC87393 Super I/O. The board date is September 16, 2003, with project code ZP1.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The EC/KBC is a PC87570.
Q: What is the CPU platform and socket type?
A: The CPU platform is AMD Processor (Socket A).
Q: What audio codec and amplifier are used?
A: The audio codec is a Realtek ALC202, and the audio amplifier is a G1421.
Q: What is the memory architecture?
A: The memory architecture is DDR DIMM with two slots.
Q: What is the graphics configuration?
A: The graphics subsystem uses an ATI M9+ GPU on the AGP bus, with an external VGA option and a CH7019 TV encoder and LVDS transmitter.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Quanta Computer Inc. |
| Model | ZP1 TouchPAD Board |
| Motherboard Manufacturer | Quanta Computer Inc. |
| Project Code | ZP1 |
| Board Number | 32ZP1TP0007 |
| Revision | 3B |
| Date | 08/06/2003 |
| Document Number | 204 |
Technical Summary
This Quanta Computer Inc. ZP1 TouchPAD Board, documented under project ZP1, carries board number 32ZP1TP0007 at revision 3B, dated August 6, 2003. The document number is 204. The board integrates touchpad interface signals TP_CLK and TP_DATA, along with status indicators including PWR_LED, BATUSE_LED, BLUETOOTH_LED, WIRELESS_LED, and BATCHG_LED. Navigation switches SCROLL_UP, SCROLL_DOWN, SCROLL_LEFT, and SCROLL_RIGHT are present, as well as LEFT_SW and RIGHT_SW. Power rails include 5VPCU, 5VSUS, and 5V. The board uses an E&T 6902-10P connector at CN1 and an ACES 87216-1802 connector at CN2.
Technician FAQ
Q: What is the board number and revision for this ZP1 TouchPAD Board?
A: The board number is 32ZP1TP0007, revision 3B.
Q: What connectors are used on this board?
A: CN1 is an E&T 6902-10P connector, and CN2 is an ACES 87216-1802 connector.
Q: What power rails are present on this board?
A: The power rails include 5VPCU, 5VSUS, and 5V.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Quanta Computer Inc. |
| Model | ZP1 TV-OUT BOARD |
| Motherboard Manufacturer | Quanta Computer Inc. |
| Project Code | ZP1 |
| Board Number | 34ZP1TB0002 |
| Revision | 3B |
| Date | 08/06/2003 |
| Document Number | 204 |
| TV Encoder | CH7019 |
Technical Summary
This Quanta Computer Inc. ZP1 TV-OUT BOARD, project code ZP1, is documented under board number 34ZP1TB0002 and document number 204, revision 3B, dated 08/06/2003. The board is designed as a TV-Out interface daughterboard, featuring a CH7019 TV encoder IC for video signal processing. The schematic details the integration of the TV-Out interface with an AGP 4X/8X I/F and keyboard connector, utilizing a Foxconn QTS1120A-1021 connector for the keyboard interface and an E&T 6900-24P connector for the TV-Out interface. The board operates on 1.5V and 3V power rails and includes a 14.318MHz crystal oscillator for clock generation. The CH7019 encoder supports both NTSC and PAL TV formats, with its default I2C address configurable via resistor stuffing options.
Technician FAQ
Q: What is the board number and revision for this TV-Out board?
A: The board number is 34ZP1TB0002, revision 3B, dated 08/06/2003.
Q: What TV encoder IC is used on this board?
A: The board uses a CH7019 TV encoder IC.
Q: What TV formats does the CH7019 encoder support?
A: The CH7019 supports NTSC and PAL TV formats, configurable via the GPIO0 pin and resistor R13 stuffing.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited:
