acer aspire 5742_5741g compal_la-5893p_rev0.1 schematic
acer aspire 5742_5741g=1=compal_la-5893p_rev0.1.pdf
Technical Specifications
Technical Summary
This Compal LA-5893P motherboard, documented under revision 0.1 dated December 23, 2009, is designed for the NEW71/91 model series. The platform is built around an Intel Arrandale processor with DDRIII memory and the Ibex Peak-M PCH. Graphics are handled by an NV N11P-GV2H GPU, supporting both UMA and DIS configurations. The system management is controlled by an ENE KB926 EC/KBC. Audio is provided by an ALC272X codec, and networking is handled by a BCM57780 Gigabit LAN controller. Memory is configured as two 204-pin DDRIII SO-DIMM slots. A single SPI ROM is used for BIOS storage. The charging circuit is managed by a TI TPS6017 IC. A card reader is implemented using the RTS5160 controller. Wireless connectivity supports both WLAN and WWAN modules.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The EC/KBC is an ENE KB926.
Q: What is the BIOS flash configuration?
A: The board uses a single SPI ROM for BIOS storage.
Q: What is the memory architecture?
A: The board supports two 204-pin DDRIII SO-DIMM modules.
Q: What is the GPU configuration?
A: The board uses an NV N11P-GV2H GPU and supports both UMA and DIS graphics configurations.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
acer aspire 5742_5741g=1=compal_la-5893p_rev0.1.pdf
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Compal |
| Model | NEW71/91 |
| Motherboard Manufacturer | Compal Electronics, Inc. |
| Board Number | LA-5893P |
| Revision | 0.1 |
| Date | 2009-12-23 |
| CPU Platform | Intel Arrandale Processor with DDRIII + Ibex Peak-M |
| GPU Type | NV N11P-GV2H |
| EC / KBC | ENE KB926 |
| Audio Codec | ALC272X |
| LAN IC | BCM57780 |
| Card Reader IC | RTS5160 |
| RAM Type | DDRIII |
| RAM Architecture | 204pin DDRIII-SO-DIMM X2 |
| RAM Quantity / Slots | 2 |
| Charging IC | TI TPS6017 |
| BIOS / SPI Flash | SPI ROM x1 |
| WiFi / WLAN IC | WLAN, WWAN |
| Graphics Architecture | UMA/DIS |
| Document Number | NEW71/91 M/B LA-5893P Schematic |
Technical Summary
This Compal LA-5893P motherboard, documented under revision 0.1 dated December 23, 2009, is designed for the NEW71/91 model series. The platform is built around an Intel Arrandale processor with DDRIII memory and the Ibex Peak-M PCH. Graphics are handled by an NV N11P-GV2H GPU, supporting both UMA and DIS configurations. The system management is controlled by an ENE KB926 EC/KBC. Audio is provided by an ALC272X codec, and networking is handled by a BCM57780 Gigabit LAN controller. Memory is configured as two 204-pin DDRIII SO-DIMM slots. A single SPI ROM is used for BIOS storage. The charging circuit is managed by a TI TPS6017 IC. A card reader is implemented using the RTS5160 controller. Wireless connectivity supports both WLAN and WWAN modules.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The EC/KBC is an ENE KB926.
Q: What is the BIOS flash configuration?
A: The board uses a single SPI ROM for BIOS storage.
Q: What is the memory architecture?
A: The board supports two 204-pin DDRIII SO-DIMM modules.
Q: What is the GPU configuration?
A: The board uses an NV N11P-GV2H GPU and supports both UMA and DIS graphics configurations.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited:
