acer aspire e1-510 (compal la-a621p) b59a7 compal la-a621p rev 0.3 2013.pdf 1
Technical Specifications
Technical Summary
This Compal LA-A621P Rev 0.3 motherboard, designed for the Z5WE3/Z5WT3 model series, is built on the Intel Bay Trail-M platform. The system utilizes a single 204-pin DDR3L SO-DIMM slot for memory. Audio is handled by an ALC3225 HDA codec, while wired networking is provided by a Realtek RTL8411-CG Gigabit LAN controller. The embedded controller is an ENE KB9012. The board stores its firmware on an 8MB 1.8V SPI ROM. A FE1.1s(STT) IC serves as both a USB hub and a card reader controller.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is an ENE KB9012.
Q: What is the BIOS flash configuration?
A: The board uses an 8MB SPI ROM operating at 1.8V.
Q: What is the memory configuration?
A: The board supports a single 204-pin DDR3L SO-DIMM module.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Compal |
| Model | Z5WE3/Z5WT3 |
| Motherboard Manufacturer | Compal Electronics, Inc. |
| Board Number | LA-A621P |
| Revision | 0.3 |
| Date | 2013-09-03 |
| CPU Platform | Intel Bay Trail-M |
| EC / KBC | ENE KB9012 |
| Audio Codec | ALC3225 |
| BIOS / SPI Flash | SPI ROM 1.8V (8MB) |
| LAN IC | RTL8411-CG |
| RAM Type | DDR3L |
| RAM Architecture | 204pin DDR3L-SO-DIMM X1 |
| RAM Quantity / Slots | 1 |
| Card Reader IC | FE1.1s(STT) |
| USB Hub IC | FE1.1s(STT) |
Technical Summary
This Compal LA-A621P Rev 0.3 motherboard, designed for the Z5WE3/Z5WT3 model series, is built on the Intel Bay Trail-M platform. The system utilizes a single 204-pin DDR3L SO-DIMM slot for memory. Audio is handled by an ALC3225 HDA codec, while wired networking is provided by a Realtek RTL8411-CG Gigabit LAN controller. The embedded controller is an ENE KB9012. The board stores its firmware on an 8MB 1.8V SPI ROM. A FE1.1s(STT) IC serves as both a USB hub and a card reader controller.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is an ENE KB9012.
Q: What is the BIOS flash configuration?
A: The board uses an 8MB SPI ROM operating at 1.8V.
Q: What is the memory configuration?
A: The board supports a single 204-pin DDR3L SO-DIMM module.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited:
