acer q3zmc ls-8482p r1.0 0411
Technical Specifications
Technical Summary
This Compal Electronics, Inc. schematic, dated Wednesday, April 11, 2012, is for Project Code Q3ZMC CR/B LS-8482P0.1, Revision 2.0. The card reader subsystem is built around the RTS5209-GR controller in a LQFP48_7X7 package, paired with a T-SOL_5-2508110010009_NRCONN connector. The design incorporates an AH180WG-7 SC-59 3P hall effect sensor switch for lid detection, an ESD24VC3-2 ESD protection diode, and a RB751V-40 SOD323-2 Schottky diode. The PCB is identified as DA60000S210, with an assembly number of NBX00016800. The schematic includes a SKRTLAE010_3P side button switch and a H_1P4x2P4N test point header.
Technician FAQ
Q: What is the card reader controller IC used on this board?
A: The card reader controller is the RTS5209-GR in a LQFP48_7X7 package.
Q: What is the PCB number for this Compal card reader board?
A: The PCB number is DA60000S210.
Q: What hall sensor is used for lid detection?
A: The hall sensor is the AH180WG-7 in a SC-59 3-pin package.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Compal |
| Motherboard Manufacturer | Compal Electronics, Inc. |
| Project Code | Q3ZMC CR/B LS-8482P0.1 |
| Revision | 2.0 |
| Date | Wednesday, April 11, 2012 |
| Card Reader IC | RTS5209-GR_LQFP48_7X7 |
| Card Reader IC Package | LQFP48_7X7 |
| Card Reader Connector | T-SOL_5-2508110010009_NRCONN |
| Hall Sensor IC | AH180WG-7 SC-59 3P SENSOR SW |
| ESD Protection Diode | ESD24VC3-2 |
| Schottky Diode | RB751V-40_SOD323-2 |
| Test Point Header | H_1P4x2P4N |
| Power Header | H_3P0 |
| Side Button Switch | SKRTLAE010_3P |
| PCB Number | DA60000S210 |
| Assembly Number | NBX00016800 |
Technical Summary
This Compal Electronics, Inc. schematic, dated Wednesday, April 11, 2012, is for Project Code Q3ZMC CR/B LS-8482P0.1, Revision 2.0. The card reader subsystem is built around the RTS5209-GR controller in a LQFP48_7X7 package, paired with a T-SOL_5-2508110010009_NRCONN connector. The design incorporates an AH180WG-7 SC-59 3P hall effect sensor switch for lid detection, an ESD24VC3-2 ESD protection diode, and a RB751V-40 SOD323-2 Schottky diode. The PCB is identified as DA60000S210, with an assembly number of NBX00016800. The schematic includes a SKRTLAE010_3P side button switch and a H_1P4x2P4N test point header.
Technician FAQ
Q: What is the card reader controller IC used on this board?
A: The card reader controller is the RTS5209-GR in a LQFP48_7X7 package.
Q: What is the PCB number for this Compal card reader board?
A: The PCB number is DA60000S210.
Q: What hall sensor is used for lid detection?
A: The hall sensor is the AH180WG-7 in a SC-59 3-pin package.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited:
