acer travel mate p449-g2-mp449-g2-mgp449-mp449-mgp459-g2-m pegatron p4 uma
Technical Specifications
Technical Summary
This Pegatron KTKUG_25W Rev 1.0 motherboard is built around the Skylake U (2+2) platform with DDR4 memory architecture supporting Memory Down x4 and one SO-DIMM slot. The system is managed by an IT8987E/BX EC/KBC controller and boots from a 16M SPI ROM. Audio is handled by a Realtek ALC255 codec, while wired networking is provided by an Intel I219 LAN controller. Wireless connectivity is supported via an NGFF WLAN/WiGig module. The board features a dedicated N16P-GT dGPU with GDDR5 frame buffer memory. DisplayPort switching is managed by a PS8338B HDMI level shifter, and USB 3.0 connectivity is supported by a TI SN65LVPE512 re-driver. The charging subsystem is handled by a dedicated battery charger IC, and a GENESYS GL850G USB hub IC provides additional USB 2.0 port expansion. A Realtek RTS5229 card reader IC is also integrated.
Technician FAQ
Q: What EC/KBC controller is used on this motherboard?
A: The motherboard uses an IT8987E/BX EC/KBC controller.
Q: What is the BIOS flash configuration?
A: The board uses a 16M SPI ROM for BIOS storage.
Q: What is the memory architecture?
A: The board supports DDR4 memory with Memory Down x4 configuration plus one SO-DIMM slot.
Q: What dGPU is used and what is its memory type?
A: The dedicated GPU is an N16P-GT with GDDR5 frame buffer memory.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Pegatron |
| Project Code | KTKUG_25W |
| Revision | 1.0 |
| Date | Tuesday, September 06, 2016 |
| CPU Platform | Skylake U (2+2) |
| EC / KBC | IT8987E/BX |
| Audio Codec | Realtek ALC255 |
| BIOS / SPI Flash | 16M SPI ROM |
| Card Reader IC | RTS5229 |
| LAN IC | Intel I219 |
| WiFi / WLAN IC | NGFF WLAN/WiGig |
| Charging IC | BATTERY CHARGER |
| RAM Type | DDR4 |
| RAM Architecture | Memory Down x4 + SO-DIMM x1 |
| USB Hub IC | GENESYS GL850G |
| HDMI Level Shifter | PS8338B |
| dGPU Chip Number | N16P-GT |
| Graphics Architecture | GDDR5 |
Technical Summary
This Pegatron KTKUG_25W Rev 1.0 motherboard is built around the Skylake U (2+2) platform with DDR4 memory architecture supporting Memory Down x4 and one SO-DIMM slot. The system is managed by an IT8987E/BX EC/KBC controller and boots from a 16M SPI ROM. Audio is handled by a Realtek ALC255 codec, while wired networking is provided by an Intel I219 LAN controller. Wireless connectivity is supported via an NGFF WLAN/WiGig module. The board features a dedicated N16P-GT dGPU with GDDR5 frame buffer memory. DisplayPort switching is managed by a PS8338B HDMI level shifter, and USB 3.0 connectivity is supported by a TI SN65LVPE512 re-driver. The charging subsystem is handled by a dedicated battery charger IC, and a GENESYS GL850G USB hub IC provides additional USB 2.0 port expansion. A Realtek RTS5229 card reader IC is also integrated.
Technician FAQ
Q: What EC/KBC controller is used on this motherboard?
A: The motherboard uses an IT8987E/BX EC/KBC controller.
Q: What is the BIOS flash configuration?
A: The board uses a 16M SPI ROM for BIOS storage.
Q: What is the memory architecture?
A: The board supports DDR4 memory with Memory Down x4 configuration plus one SO-DIMM slot.
Q: What dGPU is used and what is its memory type?
A: The dedicated GPU is an N16P-GT with GDDR5 frame buffer memory.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited:
