benq joybook lite u105_u107 ntv00_la-5661p_rev1.0 schematic
benq joybook lite u105_u107=1=ntv00_la-5661p_rev1.0.pdf
Technical Specifications
Technical Summary
The Compal LA-5661P Rev 1.0 motherboard, project code NTV00, is built around the Intel PineView-M processor paired with the Tiger Point PCH. The system uses an ENE KB926 D3 EC/KBC and boots from an SPI ROM BIOS flash. Audio is handled by an ALC272-GR HDA codec, while networking is provided by an RTL8103EL 10/100M LAN controller. Memory is supported via a single 200-pin DDRII SO-DIMM slot running at DDRII 667 speeds. The board integrates an RTS5159 2-in-1 card reader, a TPA6017 audio amplifier, an SLG8SP556VTR clock generator, and an EMC1402 thermal sensor for system monitoring.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The motherboard uses an ENE KB926 D3 EC/KBC.
Q: What audio codec is used on this motherboard?
A: The motherboard uses an ALC272-GR HDA codec.
Q: What LAN controller is used on this motherboard?
A: The motherboard uses an RTL8103EL 10/100M LAN controller.
Q: What type of memory does this motherboard support?
A: The motherboard supports DDRII memory via a 200-pin DDRII-SO-DIMM slot.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
benq joybook lite u105_u107=1=ntv00_la-5661p_rev1.0.pdf
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Compal |
| Motherboard Manufacturer | Compal Electronics, Inc. |
| Project Code | NTV00 |
| Board Number | LA-5661P |
| Revision | 1.0 |
| Date | 2010-01-07 |
| Document Number | NTV00 LA5661P M/B |
| CPU Platform | Intel PineView-M |
| PCH / Southbridge | Tiger Point |
| EC / KBC | ENE KB926 D3 |
| Audio Codec | ALC272-GR |
| BIOS / SPI Flash | SPI ROM |
| RAM Type | DDRII |
| RAM Architecture | 200pin DDRII-SO-DIMM |
| LAN IC | RTL8103EL 10/100M |
| Card Reader IC | RTS5159 2IN1 |
| Audio Amplifier | TPA6017 |
| Clock Generator | SLG8SP556VTR |
| Thermal Sensor | EMC1402 |
Technical Summary
The Compal LA-5661P Rev 1.0 motherboard, project code NTV00, is built around the Intel PineView-M processor paired with the Tiger Point PCH. The system uses an ENE KB926 D3 EC/KBC and boots from an SPI ROM BIOS flash. Audio is handled by an ALC272-GR HDA codec, while networking is provided by an RTL8103EL 10/100M LAN controller. Memory is supported via a single 200-pin DDRII SO-DIMM slot running at DDRII 667 speeds. The board integrates an RTS5159 2-in-1 card reader, a TPA6017 audio amplifier, an SLG8SP556VTR clock generator, and an EMC1402 thermal sensor for system monitoring.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The motherboard uses an ENE KB926 D3 EC/KBC.
Q: What audio codec is used on this motherboard?
A: The motherboard uses an ALC272-GR HDA codec.
Q: What LAN controller is used on this motherboard?
A: The motherboard uses an RTL8103EL 10/100M LAN controller.
Q: What type of memory does this motherboard support?
A: The motherboard supports DDRII memory via a 200-pin DDRII-SO-DIMM slot.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited:
