Salim Badakhshan
Registered
Clevo NJ70ZU NJ70CU 6-71-NJ500-D03 Schematic
Technical Specifications
Technical Summary
The NJ70CU motherboard is built around a Processor platform with 12 processor power stages and two DDR4 SO-DIMM memory slots. The embedded controller is an ITE IT5570 KBC, and the system LAN is handled by a Realtek RTL8411B IC. The audio subsystem uses a dedicated Audio Codec, while HDMI output is managed by a KBL RTD2168 level shifter. Charging and DC input are controlled by a dedicated Charger, DC IN section, and power regulation includes an MP2979 controller. The board supports Type-C connectivity, a WLAN connector, and a Card Reader. The schematic is based on board number 6--7P-NJ506-004.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The motherboard uses an ITE IT5570 KBC.
Q: What memory architecture does this motherboard support?
A: It supports two DDR4 SO-DIMM slots, labeled DDR4 SO_DIMM_0 and DDR4 SO_DIMM_1.
Q: What LAN IC is used on this motherboard?
A: The LAN IC is a Realtek RTL8411B.
Q: What HDMI level shifter is used on this motherboard?
A: The HDMI level shifter is a KBL RTD2168.
Q: What power controller is used on this motherboard?
A: The power controller is an MP2979 Controller.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
Technical Summary
The NJ70ZU motherboard is based on the 6-7P-NJ506-004 revision and supports a Processor 1/12 CPU platform. Memory is provided via DDR4 SO-DIMM slots. The embedded controller is an ITE IT5570 KBC. Networking is handled by a Realtek RTL8411B LAN IC. The audio subsystem uses a dedicated Audio Codec. Display output includes an RTD2168 HDMI level shifter. Power management is controlled by an MP2979 controller and a dedicated charger and DC input section. The board also integrates a card reader controller.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The motherboard uses an ITE IT5570 KBC.
Q: What LAN IC is used on this motherboard?
A: The LAN IC is a Realtek RTL8411B.
Q: What HDMI level shifter is used on this motherboard?
A: The HDMI level shifter is an RTD2168.
Q: What power controller is used on this motherboard?
A: The power controller is an MP2979 Controller.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | NJ70CU |
| Motherboard Manufacturer | NJ70CU |
| Board Number | 6--7P-NJ506-004 |
| CPU Platform | Processor 1/12 - Processor 12/12 |
| EC / KBC | ITE IT5570 |
| EC/KBC Package | KBC-ITE IT5570 |
| RAM Type | DDR4 SO-DIMM |
| RAM Architecture | DDR4 SO_DIMM_0, DDR4 SO_DIMM_1 |
| RAM Quantity / Slots | 2 |
| LAN IC | RTL8411B |
| Audio Codec | Audio Codec |
| Card Reader IC | Card Reader |
| HDMI Level Shifter | KBL RTD2168 |
| Charging IC | Charger, DC IN |
| Power IC(s) | MP2979 Controller |
| WiFi / WLAN IC | WLAN Connector |
| USB Hub IC | Type-C |
Technical Summary
The NJ70CU motherboard is built around a Processor platform with 12 processor power stages and two DDR4 SO-DIMM memory slots. The embedded controller is an ITE IT5570 KBC, and the system LAN is handled by a Realtek RTL8411B IC. The audio subsystem uses a dedicated Audio Codec, while HDMI output is managed by a KBL RTD2168 level shifter. Charging and DC input are controlled by a dedicated Charger, DC IN section, and power regulation includes an MP2979 controller. The board supports Type-C connectivity, a WLAN connector, and a Card Reader. The schematic is based on board number 6--7P-NJ506-004.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The motherboard uses an ITE IT5570 KBC.
Q: What memory architecture does this motherboard support?
A: It supports two DDR4 SO-DIMM slots, labeled DDR4 SO_DIMM_0 and DDR4 SO_DIMM_1.
Q: What LAN IC is used on this motherboard?
A: The LAN IC is a Realtek RTL8411B.
Q: What HDMI level shifter is used on this motherboard?
A: The HDMI level shifter is a KBL RTD2168.
Q: What power controller is used on this motherboard?
A: The power controller is an MP2979 Controller.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | NJ70ZU |
| Motherboard Manufacturer | NJ70ZU |
| Board Number | 6-7P-NJ506-004 |
| Revision | 6-7P-NJ506-004 |
| CPU Platform | Processor 1/12 |
| Memory Slots | DDR4 SO-DIMM |
| EC / KBC | ITE IT5570 |
| LAN IC | RTL8411B |
| Audio Codec | Audio Codec |
| Card Reader IC | Card Reader |
| HDMI Level Shifter | RTD2168 |
| Charging IC | Charger, DC IN |
| Power IC(s) | MP2979 Controller |
Technical Summary
The NJ70ZU motherboard is based on the 6-7P-NJ506-004 revision and supports a Processor 1/12 CPU platform. Memory is provided via DDR4 SO-DIMM slots. The embedded controller is an ITE IT5570 KBC. Networking is handled by a Realtek RTL8411B LAN IC. The audio subsystem uses a dedicated Audio Codec. Display output includes an RTD2168 HDMI level shifter. Power management is controlled by an MP2979 controller and a dedicated charger and DC input section. The board also integrates a card reader controller.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The motherboard uses an ITE IT5570 KBC.
Q: What LAN IC is used on this motherboard?
A: The LAN IC is a Realtek RTL8411B.
Q: What HDMI level shifter is used on this motherboard?
A: The HDMI level shifter is an RTD2168.
Q: What power controller is used on this motherboard?
A: The power controller is an MP2979 Controller.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited by a moderator:
