dell latitude d510 quanta dm1_rev1a schematic
dell latitude d510=1=quanta dm1_rev1a.pdf
Technical Specifications
Technical Summary
This Quanta Computer motherboard schematic, dated July 18, 2003, is built around the Intel Dothan processor in a Micro-FCPGA socket, paired with the Montara-GM+GMCH graphics and memory controller hub and the ICH4-M I/O controller hub. The platform supports two DDR-SODIMM slots operating at 200/266/333 MHz. System management is handled by an SIO (Macallen) EC/KBC, with system firmware stored in a Flash device. Audio is provided via an AC97 codec. The charging architecture consists of an AC/BAT SELECTOR and DC/DC converter with a BATT CHARGER. Networking is supported by a PCI4510/7510 PHY for LAN and a MINI-PCI slot for WLAN. Video output includes a Chrontel 7009 TV encoder.
Technician FAQ
Q: What is the CPU platform and socket type?
A: The platform uses an Intel Dothan processor in a Micro-FCPGA socket.
Q: What memory configuration is supported?
A: The board supports two DDR-SODIMM slots operating at 200/266/333 MHz.
Q: What EC/KBC is used on this motherboard?
A: The system uses an SIO (Macallen) EC/KBC.
Q: What is the charging architecture?
A: The charging system uses an AC/BAT SELECTOR, DC/DC converter, and a BATT CHARGER.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
dell latitude d510=1=quanta dm1_rev1a.pdf
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | QUANTA COMPUTER |
| Date | Friday, July 18, 2003 |
| CPU Platform | Dothan |
| PCH / Southbridge | ICH4-M |
| Graphics Architecture | Montara-GM+GMCH |
| RAM Type | DDR-SODIMM |
| RAM Architecture | 200/266/333 MHZ DDR |
| RAM Quantity / Slots | 2 |
| LAN IC | PCI4510/7510 |
| WiFi / WLAN IC | MINI-PCI |
| Card Reader IC | Chrontel 7009 |
| Charging IC | BATT CHARGER |
| Charger Architecture | AC/BAT SELECTOR, DC/DC |
| Audio Codec | AC97 |
| EC / KBC | SIO(Macallen) |
| BIOS / SPI Flash | Flash |
| CPU Socket | Micro-FCPGA |
| CPU Model | Dothan Processor |
Technical Summary
This Quanta Computer motherboard schematic, dated July 18, 2003, is built around the Intel Dothan processor in a Micro-FCPGA socket, paired with the Montara-GM+GMCH graphics and memory controller hub and the ICH4-M I/O controller hub. The platform supports two DDR-SODIMM slots operating at 200/266/333 MHz. System management is handled by an SIO (Macallen) EC/KBC, with system firmware stored in a Flash device. Audio is provided via an AC97 codec. The charging architecture consists of an AC/BAT SELECTOR and DC/DC converter with a BATT CHARGER. Networking is supported by a PCI4510/7510 PHY for LAN and a MINI-PCI slot for WLAN. Video output includes a Chrontel 7009 TV encoder.
Technician FAQ
Q: What is the CPU platform and socket type?
A: The platform uses an Intel Dothan processor in a Micro-FCPGA socket.
Q: What memory configuration is supported?
A: The board supports two DDR-SODIMM slots operating at 200/266/333 MHz.
Q: What EC/KBC is used on this motherboard?
A: The system uses an SIO (Macallen) EC/KBC.
Q: What is the charging architecture?
A: The charging system uses an AC/BAT SELECTOR, DC/DC converter, and a BATT CHARGER.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited:
