fujitsu siemens s6010-591 lifebook laurel rev 02
Technical Specifications
Technical Summary
The Laurel Main Board REV.02 is a mobile platform designed around the Intel Tualatin CPU in a Micro-FCPGA479pin socket, paired with the Almador-M GMCH and ICH3-M southbridge. System memory consists of two SDRAM SODIMM slots. The board utilizes a Firmware Hub (FWH) for BIOS storage and integrates an On Board LAN controller, Mini PCI for wireless expansion, and an OZ711E1 card reader. Thermal monitoring is handled by an ADM1030 sensor, while the embedded controller is labeled KBC. The audio subsystem includes a CODEC, and power management is governed by a dedicated Power Controler. The drawing number is C1CPxxxxxx-X1.
Technician FAQ
Q: What type of BIOS storage is used on this motherboard?
A: The motherboard uses a Firmware Hub (FWH) for BIOS storage.
Q: What is the CPU socket and platform?
A: The board supports the Intel Tualatin CPU in a Micro-FCPGA479pin socket.
Q: What memory architecture is supported?
A: The board supports SDRAM memory via two SODIMM slots (SODIMM0 and SODIMM1).
Q: What is the card reader controller used on this board?
A: The board uses an OZ711E1 controller for the card reader.
Q: What thermal sensor is used for monitoring?
A: The board uses an ADM1030 thermal sensor.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Laurel |
| Model | Laurel Main Board |
| Revision | REV.02 |
| Date | 2001/Aug/24 |
| CPU Platform | Tualatin |
| CPU Socket | Micro-FCPGA479pin |
| PCH / Southbridge | ICH3-M |
| GMCH | Almador-M |
| EC / KBC | KBC |
| Audio Codec | CODEC |
| BIOS / SPI Flash | FWH |
| Charging IC | Power Controler |
| RAM Type | SDRAM |
| RAM Architecture | SODIMM0, SODIMM1 |
| RAM Quantity / Slots | 2 |
| LAN IC | On Board LAN |
| WiFi / WLAN IC | Mini PCI |
| Card Reader IC | OZ711E1 |
| Thermal Sensor | ADM1030 |
| Super I/O | SIO |
| PLL | PLL |
| IEEE 1394 Controller | IEEE1394 |
| Drawing Number | C1CPxxxxxx-X1 |
Technical Summary
The Laurel Main Board REV.02 is a mobile platform designed around the Intel Tualatin CPU in a Micro-FCPGA479pin socket, paired with the Almador-M GMCH and ICH3-M southbridge. System memory consists of two SDRAM SODIMM slots. The board utilizes a Firmware Hub (FWH) for BIOS storage and integrates an On Board LAN controller, Mini PCI for wireless expansion, and an OZ711E1 card reader. Thermal monitoring is handled by an ADM1030 sensor, while the embedded controller is labeled KBC. The audio subsystem includes a CODEC, and power management is governed by a dedicated Power Controler. The drawing number is C1CPxxxxxx-X1.
Technician FAQ
Q: What type of BIOS storage is used on this motherboard?
A: The motherboard uses a Firmware Hub (FWH) for BIOS storage.
Q: What is the CPU socket and platform?
A: The board supports the Intel Tualatin CPU in a Micro-FCPGA479pin socket.
Q: What memory architecture is supported?
A: The board supports SDRAM memory via two SODIMM slots (SODIMM0 and SODIMM1).
Q: What is the card reader controller used on this board?
A: The board uses an OZ711E1 controller for the card reader.
Q: What thermal sensor is used for monitoring?
A: The board uses an ADM1030 thermal sensor.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited:
