Technical Support GA401QM-211.ZG14 Bios Chip Location

laptoprepairdenver

Registered
Bronze

reputation_scoree

What is the location of the bios chip? There are two Winbond chips (25q16jwnio and 74m12jwsiq) but I don't know which one is correct. Thanks!
 

laptoprepairdenver

Registered
Bronze

reputation_scoree

Ok, attached. Interesting though because when I read the chip with a cha341A programmer and software, it only shows the chip as being 2MB but the BIOS file is 16MB. Do I need to adjust the offset? Thanks!
 

Attachments

  • PXL_20230221_184630219.jpg
    PXL_20230221_184630219.jpg
    1.5 MB · Views: 6

Ahmad Safari

Registered
Golden

Reputation:

Yes, you should find 25Q128.
Did you test the part that I specified in the picture?

Remove the heatsink and send a clear picture.
 

Attachments

  • PXL_20230221_184630219.jpg
    PXL_20230221_184630219.jpg
    3 MB · Views: 5

laptoprepairdenver

Registered
Bronze

reputation_scoree

Sorry for the delay, have been sick. Here are some updated pictures with no heatsink.
 

Attachments

  • PXL_20230315_212038427.jpg
    PXL_20230315_212038427.jpg
    1.1 MB · Views: 7
  • PXL_20230315_212035542.jpg
    PXL_20230315_212035542.jpg
    1.4 MB · Views: 6
  • PXL_20230315_212031411.jpg
    PXL_20230315_212031411.jpg
    1.4 MB · Views: 6

laptoprepairdenver

Registered
Bronze

reputation_scoree

Ok, the issue I have is when I read the chip with a cha341A programmer and software, it only shows the chip as being 2MB but the BIOS file is 16MB. Do I need to adjust the offset? Thanks!
 

laptoprepairdenver

Registered
Bronze

reputation_scoree

For those who read this later here is the update. My eyesight is garbage. The CH341 programmer software I was using only had the w25q128bv in its chip list not the w25q128fv (which is the correct chip). After using colibri version 1.0.1.63 (which has the 128fv) it worked fine and programmed correctly.

TLDR - If your eyesight sucks, ask for someone to read chip lists in programmer software for you. Or make the text on screen bigger... :)
 
Who is viewing this thread?

There are currently 0 members watching this topic

Top