gateway quanta za8 4in1cr audio 1a 20090309 1
Technical Specifications
Technical Summary
This Quanta Computer Inc. schematic, dated Tuesday, March 10, 2009, with revision ZA8, details the RTS5159 card reader subsystem. The core component is the RTS5159 card reader IC, which interfaces with a 28-pin card connector and a 42-pin card connector supporting MMC, SD, MS, and XD formats. The subsystem includes a 12MHz crystal for timing and a USB power switch IC, the RT9711BPF, managing power delivery to the USB ports. Audio functionality is provided via two audio jacks, models SJ-0960-D08 and SJ-0960-D09, for microphone and headphone line-out. The design incorporates common-mode filters for EMI compliance on the USB data lines and various passive components for signal conditioning and power decoupling.
Technician FAQ
Q: What card reader controller is used on this board?
A: The card reader controller is the RTS5159.
Q: What USB power switch IC is used?
A: The USB power switch IC is the RT9711BPF.
Q: What crystal frequency is used for the card reader?
A: The card reader uses a 12MHz crystal.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Quanta Computer Inc. |
| Project | RTS5159 (Card Reader) |
| Date | Tuesday, March 10, 2009 |
| Revision | ZA8 |
| Card Reader IC | RTS5159 |
| USB Power Switch IC | RT9711BPF |
| Crystal | 12MHz |
Technical Summary
This Quanta Computer Inc. schematic, dated Tuesday, March 10, 2009, with revision ZA8, details the RTS5159 card reader subsystem. The core component is the RTS5159 card reader IC, which interfaces with a 28-pin card connector and a 42-pin card connector supporting MMC, SD, MS, and XD formats. The subsystem includes a 12MHz crystal for timing and a USB power switch IC, the RT9711BPF, managing power delivery to the USB ports. Audio functionality is provided via two audio jacks, models SJ-0960-D08 and SJ-0960-D09, for microphone and headphone line-out. The design incorporates common-mode filters for EMI compliance on the USB data lines and various passive components for signal conditioning and power decoupling.
Technician FAQ
Q: What card reader controller is used on this board?
A: The card reader controller is the RTS5159.
Q: What USB power switch IC is used?
A: The USB power switch IC is the RT9711BPF.
Q: What crystal frequency is used for the card reader?
A: The card reader uses a 12MHz crystal.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited by a moderator:
