hp compaq nc4400 ls-3031p rev 0.1 finger print board schematic
ls-3031p rev 0.1 finger print board.pdf
Technical Specifications
Technical Summary
This Compal Electronics LS-3031P revision 0.1 fingerprint board, dated 2005-07-07, is built around the AES2501A-C-GA-TR-NI0A_BGA48 fingerprint sensor IC at U1. The system clock is provided by a 12MHz crystal, model 12MHZ_16P_1HX12000EK1F at Y1. Power switching is handled by two SI2301BDS_SOT23 MOSFETs at Q1 and Q2. The board includes an SR05_SOT143 protection diode at D1 and an ACES_87213-0400 connector at JP1 for external interface.
Technician FAQ
Q: What is the main fingerprint controller IC on this board?
A: The AES2501A-C-GA-TR-NI0A_BGA48 at U1.
Q: What crystal frequency is used for the fingerprint controller?
A: A 12MHz crystal, model 12MHZ_16P_1HX12000EK1F at Y1.
Q: What power switching MOSFETs are used?
A: Two SI2301BDS_SOT23 MOSFETs at Q1 and Q2.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
ls-3031p rev 0.1 finger print board.pdf
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Compal |
| Motherboard Manufacturer | Compal Electronics, Inc. |
| Project Code | LS-3031P |
| Board Number | LS-3031P |
| Revision | 0.1 |
| Date | 2005-07-07 |
| Document Number | LS-3031P |
| Fingerprint IC | AES2501A-C-GA-TR-NI0A_BGA48 |
| Fingerprint IC Reference | U1 |
| Crystal Frequency | 12MHz |
| Crystal Reference | Y1 |
| Crystal Model | 12MHZ_16P_1HX12000EK1F |
| Diode Reference | D1 |
| Diode Model | SR05_SOT143 |
| Connector Reference | JP1 |
| Connector Model | ACES_87213-0400 |
Technical Summary
This Compal Electronics LS-3031P revision 0.1 fingerprint board, dated 2005-07-07, is built around the AES2501A-C-GA-TR-NI0A_BGA48 fingerprint sensor IC at U1. The system clock is provided by a 12MHz crystal, model 12MHZ_16P_1HX12000EK1F at Y1. Power switching is handled by two SI2301BDS_SOT23 MOSFETs at Q1 and Q2. The board includes an SR05_SOT143 protection diode at D1 and an ACES_87213-0400 connector at JP1 for external interface.
Technician FAQ
Q: What is the main fingerprint controller IC on this board?
A: The AES2501A-C-GA-TR-NI0A_BGA48 at U1.
Q: What crystal frequency is used for the fingerprint controller?
A: A 12MHz crystal, model 12MHZ_16P_1HX12000EK1F at Y1.
Q: What power switching MOSFETs are used?
A: Two SI2301BDS_SOT23 MOSFETs at Q1 and Q2.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited by a moderator:
