ibm x200 x200e wistron mp1 mocha1 lnc slice -07947-1 0620 schematic 1
Technical Specifications
Technical Summary
This Wistron Port Replicator Board, documented under Project Code 91.4Y901.001 and Board Number 07947-1, is a docking station solution designed for peripheral expansion. The board integrates an SMSC USB2514 USB hub controller and two TPS2066 USB power switches for downstream port management. It provides interfaces including DVI, DisplayPort, VGA (CRT), SATA, Ethernet (RJ45), audio (S/PDIF, headphone, microphone), USB, and IEEE 1394 (FireWire). The PCB uses a 6-layer stackup (TOP, VCC, SIGNAL, SIGNAL, GND, BOTTOM) with a thickness of 1.6mm. The design includes an eSATA redriver and a DisplayPort repeater for signal integrity over the docking connector.
Technician FAQ
Q: What is the board number and project code for this Port Replicator?
A: The board number is 07947-1 and the project code is 91.4Y901.001.
Q: What USB hub controller is used on this board?
A: The board uses an SMSC USB2514 USB hub controller.
Q: What USB power switches are implemented?
A: Two TPS2066 USB power switches are used for downstream USB port power control.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Wistron Corporation |
| Board Number | 07947-1 |
| Project Code | 91.4Y901.001 |
| Document Number | A3117 |
| Date | Friday, June 20, 2008 |
| Board Type | Port Replicator Board |
| USB Hub IC | USB2514 |
| USB PWR Switch 1 | TPS2066 |
| USB PWR Switch 2 | TPS2066 |
| PCB Thickness | 1.6mm |
| PCB Stackup L1 | TOP |
| PCB Stackup L2 | VCC |
| PCB Stackup L3 | SIGNAL |
| PCB Stackup L4 | SIGNAL |
| PCB Stackup L5 | GND |
| PCB Stackup L6 | BOTTOM |
Technical Summary
This Wistron Port Replicator Board, documented under Project Code 91.4Y901.001 and Board Number 07947-1, is a docking station solution designed for peripheral expansion. The board integrates an SMSC USB2514 USB hub controller and two TPS2066 USB power switches for downstream port management. It provides interfaces including DVI, DisplayPort, VGA (CRT), SATA, Ethernet (RJ45), audio (S/PDIF, headphone, microphone), USB, and IEEE 1394 (FireWire). The PCB uses a 6-layer stackup (TOP, VCC, SIGNAL, SIGNAL, GND, BOTTOM) with a thickness of 1.6mm. The design includes an eSATA redriver and a DisplayPort repeater for signal integrity over the docking connector.
Technician FAQ
Q: What is the board number and project code for this Port Replicator?
A: The board number is 07947-1 and the project code is 91.4Y901.001.
Q: What USB hub controller is used on this board?
A: The board uses an SMSC USB2514 USB hub controller.
Q: What USB power switches are implemented?
A: Two TPS2066 USB power switches are used for downstream USB port power control.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited:
