File Request Lenovo S531 VIUS2 LA-9671P latest BIOS bin request

H

hsawk77

New Member

reputation_scoree

MotherBoard Model
VIUS2 LA-9671P
Laptop Model
Lenovo S531 ThinkPad S Series
Hi. My Lenovo S531 freezes at startup (hangs on logo), so I need to reprogram BIOS. I'll purchase VIP as soon as you guys provide the bin file to flash it via an CH341A programmer.

Thanks in advance,
BR
 
H

hsawk77

New Member

reputation_scoree

Vahab Hemmati said:
you are welcome
OK
Click to expand...

One more question, there are two files provided by you guys (THANKS for that!).
Afaik, you don't need to flash the EC.bin, because it's the Embedded Controller and does not need to be updated? If it's needed to flash the EC, then how to do this? Because the ThinkPad I wanna revive is having only one BIOS chip (located at U5 on the board, it's a Winbond 25Q64FV(SIG) chip.
 
Ahmad Kor

Ahmad Kor

Staff member
Admin

Reputation:

If the system works fine by programming bios, it is not necessary to reprogram EC.

Tutorial Videos - What Is The Proper Time To Program EC

The laptop that’s repaired in this video is Lenovo-G50 with NM-A271 motherboard which turns ON automatically but there is no display. 1.35 RAM and ALW voltages are present but the rest are absent. In this video, you’ll see the process of troubleshooting with the help of the Voltage Rails, Power...
dr-bios.com

Tutorial Videos - How to Change and Program EC chip in Lenovo G50-70 with SVOD3 and TNM5000

You can practically see how to change IT8586E IO IC and you’ll get familiar with all the details of programming IO by SVOD3 and TNM5000 programmers. Stay with us and tell us what you think about the video in the comment section :) This video is in English!
dr-bios.com

How To Program KBC Chip By TNM5000 Programmer (Tutorial Video)

In this tutorial video, you get to know how to program IC/IO by TNM5000 programmer. Hope you enjoy watching this video and watch our other videos and we are looking forward for your feedbacks.
dr-bios.com

How To Program ITE IO With Vertyanov Programmer

There is a new programmer called Vertyanov. The name sounds Russian. Yes the Vertyanov programmer is Russian :) In the video bellow, all the information and details of how to use the programmer are shown. You can see how to use this programmer to Read and Write IT8586E, program all IOs...
dr-bios.com

Tutorial Videos - How To Use SVOD Programmer KBC, SPI, I2c, MEC, ITE

This programmer is the new version of the late programmers and it's very easy to work with it. It's not manual; it means by the use of its software, you can connect I/O pins to keyboard connector. In revision 5.1 there was added an option to firmware ITE multiple controllers. Test were done on...
dr-bios.com
 
H

hsawk77

New Member

reputation_scoree

Mahla Bay said:
If the system works fine by programming bios, it is not necessary to reprogram EC.

Tutorial Videos - What Is The Proper Time To Program EC

The laptop that’s repaired in this video is Lenovo-G50 with NM-A271 motherboard which turns ON automatically but there is no display. 1.35 RAM and ALW voltages are present but the rest are absent. In this video, you’ll see the process of troubleshooting with the help of the Voltage Rails, Power...
dr-bios.com

Tutorial Videos - How to Change and Program EC chip in Lenovo G50-70 with SVOD3 and TNM5000

You can practically see how to change IT8586E IO IC and you’ll get familiar with all the details of programming IO by SVOD3 and TNM5000 programmers. Stay with us and tell us what you think about the video in the comment section :) This video is in English!
dr-bios.com

How To Program KBC Chip By TNM5000 Programmer (Tutorial Video)

In this tutorial video, you get to know how to program IC/IO by TNM5000 programmer. Hope you enjoy watching this video and watch our other videos and we are looking forward for your feedbacks.
dr-bios.com

How To Program ITE IO With Vertyanov Programmer

There is a new programmer called Vertyanov. The name sounds Russian. Yes the Vertyanov programmer is Russian :) In the video bellow, all the information and details of how to use the programmer are shown. You can see how to use this programmer to Read and Write IT8586E, program all IOs...
dr-bios.com

Tutorial Videos - How To Use SVOD Programmer KBC, SPI, I2c, MEC, ITE

This programmer is the new version of the late programmers and it's very easy to work with it. It's not manual; it means by the use of its software, you can connect I/O pins to keyboard connector. In revision 5.1 there was added an option to firmware ITE multiple controllers. Test were done on...
dr-bios.com
Click to expand...

Hi. Okay, thank you! ☺️☺️
 
Who is viewing this thread?

There are currently 0 members watching this topic

Users who has read this topic

cobra , Lis211970 , user50996

You must log in or register to reply here.
Image Links
Tracking Invoice YouTube
Top