lenovo y400 qiqy5 la-8691p rev 02 2012-0316a schematic 1
Technical Specifications
Technical Summary
This Compal Whisky3.0 (Y490) LA-8691P Rev0.2 schematic details a motherboard built around an Intel Ivy Bridge processor in an rPGA-989 socket paired with the Intel Panther Point PCH. Graphics are handled by dual nVIDIA N13P GT1-A2 GPUs with GDDR5 VRAM. The system firmware is stored on a SPI ROM with a combined 4MB+2MB capacity. The embedded controller is an ITE IT8580E-HX. Audio is managed by a Realtek ALC269Q-VC3 codec, while networking is provided by an Atheros AR8161 or AR8151 1GbE controller. The board supports dual-channel DDR3 memory via two SO-DIMM slots and includes a JMB38C card reader and an EMC 1403 thermal sensor.
Technician FAQ
Q: What is the board number and project code for this motherboard?
A: The board number is LA-8691P, and the project code is Y490 (Whisky3.0).
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is an ITE IT8580E-HX.
Q: What is the BIOS/SPI flash configuration?
A: The SPI ROM is configured as 4MB+2MB.
Q: What is the graphics configuration?
A: The motherboard uses dual nVIDIA N13P GT1-A2 GPUs with GDDR5 VRAM.
Q: What LAN ICs are supported?
A: The board supports either an Atheros AR8161 1G or AR8151 1G Ethernet controller.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
Technical Summary
This Compal Whisky3.0 (Y490) LA-8691P Rev0.2 schematic details a motherboard built around an Intel Ivy Bridge processor in an rPGA-989 socket paired with the Intel Panther Point PCH. Graphics are handled by dual nVIDIA N13P GT1-A2 GPUs with GDDR5 memory. The system firmware is stored on a SPI ROM configured as 4MB+2MB. System management is handled by an ITE IT8580E-HX EC/KBC. Audio is provided by a Realtek ALC269Q-VC3 codec driving a MAX98400B amplifier. Networking is supported by an Atheros AR8161 or AR8151 gigabit LAN controller. Memory configuration consists of dual-channel DDRIII across two DDR3 SO-DIMM slots. A JMB38C controller provides SD/MMC/MS/XD card reader support, and thermal monitoring is managed by an EMC 1403 sensor.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The EC/KBC is an ITE IT8580E-HX.
Q: What is the BIOS/SPI flash configuration?
A: The SPI ROM is configured as 4MB+2MB.
Q: What is the GPU configuration?
A: The motherboard uses dual nVIDIA N13P GT1-A2 GPUs with GDDR5 VRAM.
Q: What is the memory architecture?
A: The motherboard supports dual-channel DDRIII memory via two DDR3 SO-DIMM slots.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Compal |
| Model | Whisky3.0 (Y490) |
| Motherboard Manufacturer | Compal Electronics, Inc. |
| Project Code | Y490 |
| Board Number | LA-8691P |
| Revision | Rev0.2 |
| Date | 2012-02-05 |
| CPU Platform | Intel IVY Bridge Processor |
| CPU Socket | rPGA-989 |
| PCH / Southbridge | Intel Panther Point |
| GPU Type | nVIDIA N13P GT1-A2 + 2nd VGA N13P GT1-A2 |
| Graphics Architecture | GDDR5 |
| EC / KBC | ITE IT8580E-HX |
| Audio Codec | ALC269Q-VC3 |
| BIOS / SPI Flash | SPI ROM (4MB+2MB) |
| Charging IC | MAX98400B |
| RAM Type | DDRIII |
| RAM Architecture | Dual Channel |
| RAM Quantity / Slots | DDR3-SO-DIMM X2 |
| Thermal Sensor | EMC 1403 |
| Card Reader IC | JMB38C |
| LAN IC | Atheros AR8161 1G / AR8151 1G |
Technical Summary
This Compal Whisky3.0 (Y490) LA-8691P Rev0.2 schematic details a motherboard built around an Intel Ivy Bridge processor in an rPGA-989 socket paired with the Intel Panther Point PCH. Graphics are handled by dual nVIDIA N13P GT1-A2 GPUs with GDDR5 VRAM. The system firmware is stored on a SPI ROM with a combined 4MB+2MB capacity. The embedded controller is an ITE IT8580E-HX. Audio is managed by a Realtek ALC269Q-VC3 codec, while networking is provided by an Atheros AR8161 or AR8151 1GbE controller. The board supports dual-channel DDR3 memory via two SO-DIMM slots and includes a JMB38C card reader and an EMC 1403 thermal sensor.
Technician FAQ
Q: What is the board number and project code for this motherboard?
A: The board number is LA-8691P, and the project code is Y490 (Whisky3.0).
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is an ITE IT8580E-HX.
Q: What is the BIOS/SPI flash configuration?
A: The SPI ROM is configured as 4MB+2MB.
Q: What is the graphics configuration?
A: The motherboard uses dual nVIDIA N13P GT1-A2 GPUs with GDDR5 VRAM.
Q: What LAN ICs are supported?
A: The board supports either an Atheros AR8161 1G or AR8151 1G Ethernet controller.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Compal |
| Model | Whisky3.0 (Y490) |
| Motherboard Manufacturer | Compal Electronics, Inc. |
| Project Code | Y490 |
| Board Number | LA-8691P |
| Revision | Rev0.2 |
| Date | 2012-02-05 |
| CPU Platform | Intel IVY Bridge Processor |
| CPU Socket | rPGA-989 |
| PCH / Southbridge | Intel Panther Point |
| GPU Type | nVIDIA N13P GT1-A2 + 2nd VGA N13P GT1-A2 |
| Graphics Architecture | GDDR5 |
| EC / KBC | ITE IT8580E-HX |
| Audio Codec | ALC269Q-VC3 |
| BIOS / SPI Flash | SPI ROM (4MB+2MB) |
| RAM Type | DDRIII |
| RAM Architecture | Dual Channel |
| RAM Quantity / Slots | DDR3-SO-DIMM X2 |
| LAN IC | Atheros AR8161 1G / AR8151 1G |
| Card Reader IC | JMB38C |
| Thermal Sensor | EMC 1403 |
| Audio Amplifier | MAX98400B |
Technical Summary
This Compal Whisky3.0 (Y490) LA-8691P Rev0.2 schematic details a motherboard built around an Intel Ivy Bridge processor in an rPGA-989 socket paired with the Intel Panther Point PCH. Graphics are handled by dual nVIDIA N13P GT1-A2 GPUs with GDDR5 memory. The system firmware is stored on a SPI ROM configured as 4MB+2MB. System management is handled by an ITE IT8580E-HX EC/KBC. Audio is provided by a Realtek ALC269Q-VC3 codec driving a MAX98400B amplifier. Networking is supported by an Atheros AR8161 or AR8151 gigabit LAN controller. Memory configuration consists of dual-channel DDRIII across two DDR3 SO-DIMM slots. A JMB38C controller provides SD/MMC/MS/XD card reader support, and thermal monitoring is managed by an EMC 1403 sensor.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The EC/KBC is an ITE IT8580E-HX.
Q: What is the BIOS/SPI flash configuration?
A: The SPI ROM is configured as 4MB+2MB.
Q: What is the GPU configuration?
A: The motherboard uses dual nVIDIA N13P GT1-A2 GPUs with GDDR5 VRAM.
Q: What is the memory architecture?
A: The motherboard supports dual-channel DDRIII memory via two DDR3 SO-DIMM slots.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited:
