toshiba ls-6033p tp hdd
Technical Specifications
Technical Summary
This Compal LS-6033P T/P HDD BOARD is a sub-board schematic for a hard drive and touchpad assembly, documented under the NBFBSCHEMATICS, HDD/B S6033 document number. The board is designed by Compal Electronics, Inc. and carries a revision of 0.3, with a schematic date of 2010-02-04. The document includes a revision history noting a hotbar connector change from a 10-pin to a 12-pin configuration, with pin 4 of the JHDD1 connector changed from +5VS to GND. The primary connector identified is JHDD1, specified as a SANTA_191901-1_22P connector for the hard drive interface.
Technician FAQ
Q: What is the board number for this Compal HDD/Touchpad board?
A: The board number is LS-6033P T/P HDD BOARD.
Q: What revision is this schematic?
A: The schematic revision is 0.3, dated 2010-02-04.
Q: What connector is used for the hard drive interface?
A: The hard drive connector is JHDD1, specified as a SANTA_191901-1_22P connector.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Compal |
| Model | LS-6033P T/P HDD BOARD |
| Motherboard Manufacturer | Compal Electronics, Inc. |
| Board Number | LS-6033P T/P HDD BOARD |
| Revision | 0.3 |
| Date | 2010-02-04 |
| Document Number | NBFBSCHEMATICS, HDD/B S6033 |
Technical Summary
This Compal LS-6033P T/P HDD BOARD is a sub-board schematic for a hard drive and touchpad assembly, documented under the NBFBSCHEMATICS, HDD/B S6033 document number. The board is designed by Compal Electronics, Inc. and carries a revision of 0.3, with a schematic date of 2010-02-04. The document includes a revision history noting a hotbar connector change from a 10-pin to a 12-pin configuration, with pin 4 of the JHDD1 connector changed from +5VS to GND. The primary connector identified is JHDD1, specified as a SANTA_191901-1_22P connector for the hard drive interface.
Technician FAQ
Q: What is the board number for this Compal HDD/Touchpad board?
A: The board number is LS-6033P T/P HDD BOARD.
Q: What revision is this schematic?
A: The schematic revision is 0.3, dated 2010-02-04.
Q: What connector is used for the hard drive interface?
A: The hard drive connector is JHDD1, specified as a SANTA_191901-1_22P connector.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited:
