toshiba_m203_m200_m206_l200 ma10-6050a2110801-mb-a05_mp_a05_6050a2136101-mb-a03 schematic
ma10-6050a2110801-mb-a05_mp_a05_6050a2136101-mb-a03.pdf
Technical Specifications
Technical Summary
The Inventec Miami 10 motherboard, documented under board number CSA359 revision 3, is built around the Intel Merom CPU platform paired with the Calistoga northbridge and ICH8-M southbridge. System memory consists of two DDR2 SODIMM slots operating at 533/667 MHz. The embedded controller is a Winbond W8769L, also serving as the Super I/O. Audio is handled by a Realtek ALC268 codec, while networking is provided by a Marvell 88E8039 10/100 controller. The charging subsystem uses a TI BQ24721 battery charger IC, and system power regulation is managed by a TI TPS51020 controller. The BIOS is stored on a SPI EEROM with co-layout options. Additional integrated components include an ICS9LPRS365 clock generator, a TI PCI8412 card reader, a GMT G680LT1 thermal sensor, and a GL955S USB hub IC.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is a Winbond W8769L, which also functions as the Super I/O.
Q: What charging IC is used on this motherboard?
A: The charging IC is a TI BQ24721 in a QFN-32 package.
Q: What is the memory architecture of this motherboard?
A: The motherboard uses two DDR2 SODIMM slots with a 533/667 MHz interface.
Q: What LAN controller is used on this motherboard?
A: The LAN controller is a Marvell 88E8039 supporting 10/100 Mbps.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
ma10-6050a2110801-mb-a05_mp_a05_6050a2136101-mb-a03.pdf
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Inventec |
| Model | Miami 10 |
| Motherboard Manufacturer | Inventec |
| Project Code | Miami 10 |
| Board Number | CSA359 |
| Revision | 3 |
| Date | 27-Mar-2007 |
| Document Number | 1310A21108A04 |
| CPU Platform | Merom |
| PCH / Southbridge | ICH8-M |
| GPU Type | Calistoga |
| Graphics Architecture | Calistoga |
| EC / KBC | W8769L |
| Audio Codec | ALC268 |
| BIOS / SPI Flash | SPI EEROM (CO-LAYOUT) |
| Charging IC | TI_BQ24721_QFN_32PU |
| Charger Architecture | DC & Battery charger |
| Power IC(s) | TI_TPS51020DBT_TSSOP_30P |
| RAM Type | DDR2 |
| RAM Architecture | DDR2_SODIMM |
| RAM Quantity / Slots | 2 |
| LAN IC | Marvell 88E8039 |
| WiFi / WLAN IC | Wireless LAN Module 56K |
| Card Reader IC | TI PCI8412 |
| Super I/O | Winbond W8769L |
| Clock Generator | ICS9LPRS365 |
| Thermal Sensor | GMT_G680LT1_SOT23_5P |
| USB Hub IC | GL955S |
| HDMI Level Shifter | Not explicitly present in source |
Technical Summary
The Inventec Miami 10 motherboard, documented under board number CSA359 revision 3, is built around the Intel Merom CPU platform paired with the Calistoga northbridge and ICH8-M southbridge. System memory consists of two DDR2 SODIMM slots operating at 533/667 MHz. The embedded controller is a Winbond W8769L, also serving as the Super I/O. Audio is handled by a Realtek ALC268 codec, while networking is provided by a Marvell 88E8039 10/100 controller. The charging subsystem uses a TI BQ24721 battery charger IC, and system power regulation is managed by a TI TPS51020 controller. The BIOS is stored on a SPI EEROM with co-layout options. Additional integrated components include an ICS9LPRS365 clock generator, a TI PCI8412 card reader, a GMT G680LT1 thermal sensor, and a GL955S USB hub IC.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is a Winbond W8769L, which also functions as the Super I/O.
Q: What charging IC is used on this motherboard?
A: The charging IC is a TI BQ24721 in a QFN-32 package.
Q: What is the memory architecture of this motherboard?
A: The motherboard uses two DDR2 SODIMM slots with a 533/667 MHz interface.
Q: What LAN controller is used on this motherboard?
A: The LAN controller is a Marvell 88E8039 supporting 10/100 Mbps.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited:
