toshiba satellite a505 cs10mg 6050a2303201 mb a01
Technical Specifications
Technical Summary
The INVENTEC Chelsea 10MG motherboard, documented under board number CSA3701 and document number 1310A2250501-MTR, is built around the Cantiga CPU platform paired with the ICH9-M southbridge. The system memory architecture is DDR2, supporting two DIMM slots (DDR2 DIMM0 and DDR2 DIMM1). The embedded controller is a WINBOND WPCE781x, and the audio subsystem is handled by an ALC 272 codec. The charging architecture is a System Charger design utilizing the TI_BQ24721C_QFN_32 charging IC. Networking is provided by a Realtek RTL8111D LAN controller and a Realtek RTL8103E WLAN IC. The BIOS is stored on an SPI EEROM, and the card reader interface is managed by a RICOH_R5U230 controller.
Technician FAQ
Q: What is the board number and document number for this motherboard?
A: The board number is CSA3701, and the document number is 1310A2250501-MTR.
Q: What EC/KBC is used on this motherboard?
A: The EC/KBC is a WINBOND WPCE781x.
Q: What charging IC and architecture does this motherboard use?
A: The charging IC is a TI_BQ24721C_QFN_32, and the architecture is System Charger.
Q: What audio codec is used on this motherboard?
A: The audio codec is an ALC 272.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | INVENTEC |
| Model | Chelsea 10MG |
| Motherboard Manufacturer | INVENTEC |
| Project Code | Chelsea 10MG |
| Board Number | CSA3701 |
| Revision | A3E |
| Date | 2009.07.13 |
| Document Number | 1310A2250501-MTR |
| CPU Platform | Cantiga |
| PCH / Southbridge | ICH9-M |
| GPU Type | Cantiga |
| EC / KBC | WINBOND WPCE781x |
| Audio Codec | ALC 272 |
| BIOS / SPI Flash | SPI EEROM |
| Charging IC | TI_BQ24721C_QFN_32 |
| Charger Architecture | System Charger |
| RAM Type | DDR2 |
| RAM Architecture | DDR2 Interface |
| RAM Quantity / Slots | DDR2 DIMM0, DDR2 DIMM1 |
| Card Reader IC | RICOH_R5U230 |
| LAN IC | RTL8111D |
| WiFi / WLAN IC | Realtek RTL8103E |
Technical Summary
The INVENTEC Chelsea 10MG motherboard, documented under board number CSA3701 and document number 1310A2250501-MTR, is built around the Cantiga CPU platform paired with the ICH9-M southbridge. The system memory architecture is DDR2, supporting two DIMM slots (DDR2 DIMM0 and DDR2 DIMM1). The embedded controller is a WINBOND WPCE781x, and the audio subsystem is handled by an ALC 272 codec. The charging architecture is a System Charger design utilizing the TI_BQ24721C_QFN_32 charging IC. Networking is provided by a Realtek RTL8111D LAN controller and a Realtek RTL8103E WLAN IC. The BIOS is stored on an SPI EEROM, and the card reader interface is managed by a RICOH_R5U230 controller.
Technician FAQ
Q: What is the board number and document number for this motherboard?
A: The board number is CSA3701, and the document number is 1310A2250501-MTR.
Q: What EC/KBC is used on this motherboard?
A: The EC/KBC is a WINBOND WPCE781x.
Q: What charging IC and architecture does this motherboard use?
A: The charging IC is a TI_BQ24721C_QFN_32, and the architecture is System Charger.
Q: What audio codec is used on this motherboard?
A: The audio codec is an ALC 272.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Indexed motherboard components
Open a component to see every indexed schematic that uses the same part.
Indexed motherboard components
Open a component to see every indexed schematic that uses the same part.
Attachments
Last edited:
