toshiba_satellite_l500 perugia_10m_mp_build(a03)_6050a2303001-mb-a3_6050a2250501 schematic
toshiba_satellite_l500=1=perugia_10m_mp_build(a03)_6050a2303001-mb-a3_6050a2250501.pdf
Technical Specifications
Technical Summary
The Inventec Perugia 10M motherboard, document number 1310A2250501 revision A03 dated 2009.05.05, is built around the Intel Penryn CPU platform paired with the ICH9-M southbridge. Graphics are handled by the integrated Cantiga GPU. The system uses DDR2 memory across two SODIMM slots. The embedded controller is a Winbond NPCE781LA0DX, and the audio codec is a Realtek ALC 272. The BIOS is stored on an SPI EEROM. The charging architecture is a System Charger & VR utilizing a BQ24721C charger IC. Power management is handled by TPS51125, TSP51117, APL5930, G2997 F6UD, and TI_51620 power ICs. Networking is provided by a Realtek RTL8103E LAN controller. The HDMI interface uses a PTN3360A level shifter, and the card reader is controlled by a Ricoh R5C804 controller.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is a Winbond NPCE781LA0DX.
Q: What audio codec is used on this motherboard?
A: The audio codec is a Realtek ALC 272.
Q: What charging IC is used on this motherboard?
A: The charging IC is a BQ24721C.
Q: What LAN controller is used on this motherboard?
A: The LAN controller is a Realtek RTL8103E.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
toshiba_satellite_l500=1=perugia_10m_mp_build(a03)_6050a2303001-mb-a3_6050a2250501.pdf
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | INVENTEC |
| Model | Perugia 10M |
| Motherboard Manufacturer | INVENTEC |
| Project Code | Perugia10M |
| Board Number | CSA36311310A2250501x01 |
| Revision | A03 |
| Date | 2009.05.05 |
| Document Number | 1310A2250501 |
| CPU Platform | PENRYN-3 |
| PCH / Southbridge | ICH9-M |
| GPU Type | Cantiga |
| Graphics Architecture | Cantiga |
| EC / KBC | NPCE781LA0DX |
| EC/KBC Package | WINBOND |
| Audio Codec | ALC 272 |
| BIOS / SPI Flash | SPI EEROM |
| Charging IC | BQ24721C |
| Charger Architecture | System Charger & VR |
| Power IC(s) | TPS51125, TSP51117, APL5930, G2997 F6UD, TI_51620 |
| RAM Type | DDR II |
| RAM Architecture | DDR2 Interface |
| RAM Quantity / Slots | DDR2 DIMM0, DDR2 DIMM1 |
| Card Reader IC | RICOH_R5C804 |
| LAN IC | RTL8103E |
| WiFi / WLAN IC | Wireless LAN |
| HDMI Level Shifter | PTN3360A |
Technical Summary
The Inventec Perugia 10M motherboard, document number 1310A2250501 revision A03 dated 2009.05.05, is built around the Intel Penryn CPU platform paired with the ICH9-M southbridge. Graphics are handled by the integrated Cantiga GPU. The system uses DDR2 memory across two SODIMM slots. The embedded controller is a Winbond NPCE781LA0DX, and the audio codec is a Realtek ALC 272. The BIOS is stored on an SPI EEROM. The charging architecture is a System Charger & VR utilizing a BQ24721C charger IC. Power management is handled by TPS51125, TSP51117, APL5930, G2997 F6UD, and TI_51620 power ICs. Networking is provided by a Realtek RTL8103E LAN controller. The HDMI interface uses a PTN3360A level shifter, and the card reader is controlled by a Ricoh R5C804 controller.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is a Winbond NPCE781LA0DX.
Q: What audio codec is used on this motherboard?
A: The audio codec is a Realtek ALC 272.
Q: What charging IC is used on this motherboard?
A: The charging IC is a BQ24721C.
Q: What LAN controller is used on this motherboard?
A: The LAN controller is a Realtek RTL8103E.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited:
