wistron comet-2 lco-2 11938-1 1
Technical Specifications
Technical Summary
This Wistron Corporation document, dated Monday, March 05, 2012, details the LCO-2 FPR project, a fingerprint reader sub-board. The schematic includes two fingerprint sensor IC variants: the UPEK TCD51A1DM0-GP (U1) and the UPEK TCS5DG6C2-GP (U2). The board features a 12MHz oscillator (X1) for the TCD51 and associated passive components for power decoupling and signal conditioning. The design incorporates ESD protection and specific GPIO connections for host communication via SPI-like interfaces (TC_MOSI, TC_MISO, TC_MCK, TC_NRESET, TC_DREADY, TC_MCS, TC_DATA). The sub-board is designed to interface with a mainboard through a connector (CN2) and includes a bicolor LED (LED1) for status indication.
Technician FAQ
Q: What is the project code and manufacturer for this fingerprint sub-board?
A: The project code is LCO-2 FPR, manufactured by Wistron Corporation.
Q: What fingerprint sensor ICs are used on this sub-board?
A: Two fingerprint sensor IC variants are documented: U1 is a UPEK TCD51A1DM0-GP, and U2 is a UPEK TCS5DG6C2-GP.
Q: What is the oscillator frequency for the TCD51 fingerprint sensor?
A: The TCD51 sensor (U1) uses a 12MHz crystal oscillator (X1).
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Motherboard Manufacturer | Wistron Corporation |
| Date | Monday, March 05, 2012 |
| Project Code | LCO-2 FPR |
| Fingerprint IC (UPEK_TCD51) | U1 TCD51A1DM0-GP |
| Fingerprint IC (UPEK_TCS5D) | U2 TCS5DG6C2-GP |
Technical Summary
This Wistron Corporation document, dated Monday, March 05, 2012, details the LCO-2 FPR project, a fingerprint reader sub-board. The schematic includes two fingerprint sensor IC variants: the UPEK TCD51A1DM0-GP (U1) and the UPEK TCS5DG6C2-GP (U2). The board features a 12MHz oscillator (X1) for the TCD51 and associated passive components for power decoupling and signal conditioning. The design incorporates ESD protection and specific GPIO connections for host communication via SPI-like interfaces (TC_MOSI, TC_MISO, TC_MCK, TC_NRESET, TC_DREADY, TC_MCS, TC_DATA). The sub-board is designed to interface with a mainboard through a connector (CN2) and includes a bicolor LED (LED1) for status indication.
Technician FAQ
Q: What is the project code and manufacturer for this fingerprint sub-board?
A: The project code is LCO-2 FPR, manufactured by Wistron Corporation.
Q: What fingerprint sensor ICs are used on this sub-board?
A: Two fingerprint sensor IC variants are documented: U1 is a UPEK TCD51A1DM0-GP, and U2 is a UPEK TCS5DG6C2-GP.
Q: What is the oscillator frequency for the TCD51 fingerprint sensor?
A: The TCD51 sensor (U1) uses a 12MHz crystal oscillator (X1).
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited:
