acer compal ls-4201p jal90 rev 1.0 fingerprint board
Technical Specifications
Technical Summary
This Compal Electronics LS-4201P Fingerprint Board, document number 4059L2C revision R11, dated April 11, 2008, is a dedicated fingerprint sensor interface module. The board is built around the AES1610-C-DF-TR-GO00-AC controller in a BGA40 package, which serves as the primary embedded controller for fingerprint data processing and host communication. The design includes a 12 MHz crystal oscillator for system clock generation and utilizes a PJUSB208 SOT23-6 USB overcurrent protection diode. The board features a 4-pin FPC connector for interfacing with the mainboard and includes fiducial marks for automated assembly. The schematic includes specific layout guidelines for signal integrity, including trace length and via placement requirements for the SPI and USB interfaces.
Technician FAQ
Q: What is the main controller IC on this fingerprint board?
A: The main controller is the AES1610-C-DF-TR-GO00-AC in a BGA40 package.
Q: What is the document number and revision of this schematic?
A: The document number is 4059L2C, revision R11.
Q: What is the board number for this Compal fingerprint module?
A: The Compal part number is DA600007910.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Compal |
| Motherboard Manufacturer | Compal Electronics, Inc. |
| Model | LS-4201P FINGERPRINT BOARD |
| Board Number | DA600007910 |
| Revision | R11 |
| Date | 2008/4/11 |
| Document Number | 4059L2C |
| EC / KBC | AES1610-C-DF-TR-GO00-AC-BGA40 |
| EC/KBC Package | BGA40 |
Technical Summary
This Compal Electronics LS-4201P Fingerprint Board, document number 4059L2C revision R11, dated April 11, 2008, is a dedicated fingerprint sensor interface module. The board is built around the AES1610-C-DF-TR-GO00-AC controller in a BGA40 package, which serves as the primary embedded controller for fingerprint data processing and host communication. The design includes a 12 MHz crystal oscillator for system clock generation and utilizes a PJUSB208 SOT23-6 USB overcurrent protection diode. The board features a 4-pin FPC connector for interfacing with the mainboard and includes fiducial marks for automated assembly. The schematic includes specific layout guidelines for signal integrity, including trace length and via placement requirements for the SPI and USB interfaces.
Technician FAQ
Q: What is the main controller IC on this fingerprint board?
A: The main controller is the AES1610-C-DF-TR-GO00-AC in a BGA40 package.
Q: What is the document number and revision of this schematic?
A: The document number is 4059L2C, revision R11.
Q: What is the board number for this Compal fingerprint module?
A: The Compal part number is DA600007910.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Indexed motherboard components
Open a component to see every indexed schematic that uses the same part.
Indexed motherboard components
Open a component to see every indexed schematic that uses the same part.
Attachments
Last edited:
