Technical Support acer nitro 5 in loop

[Doctorbook]

good day
i need help
acer nitro 5

board DH5JV LA-G021P

The board reboots constantly after programming the bios
The equipment arrived without giving an image
bios was programmed and it was left in that condition

this is the file that was mounted



and this is the original file



thanks

 

[Doctorbook]

Archivaments

 

[Doctorbook]

Archivaments

 

[Ahmad Safari]

What I noticed was that the device had a problem during the BIOS update.
And usually, with the BIOS update, all the programmable ICs on the board are updated, such as IO-Graphic-USB and...
This problem can be due to incomplete programming of these ICs, which must be reprogrammed with a healthy file...
It is a bit difficult to find these parts without a schematic and a healthy file.

 

[Doctorbook]

Lo que noté fue que el dispositivo tuvo un problema durante la actualización del BIOS.
Y normalmente, con la actualización del BIOS, se actualizan todos los circuitos integrados programables de la placa, como IO-Graphic-USB y...
Este problema puede deberse a una programación incompleta de estos IC, que deben reprogramarse con un archivo en buen estado...
Es un poco difícil encontrar estas piezas sin un esquema y un archivo en buen estado.

Any solution?

 

[Ahmad Safari]

Remove the programmable ICs from the board and program them with the new file using the programmer device.
You may be able to draw conclusions.

 

[Doctorbook]

Remove the programmable ICs from the board and program them with the new file using the programmer device.
You may be able to draw conclusions.

I solved the problem!

programing this bios version 1.18