Salim Badakhshan
Registered
Acer TravelMate 8372 8372T 8372TZ Inventec BAP30 BXP30 A02 Rev X01 Schematic
Technical Specifications
Technical Summary
This Inventec BAP/BXP30 motherboard, project code CS-131X01 revision X01, is built around the Intel Arrandale CPU platform using an RPGA,989 socket paired with the Ibexpeak-M PCH. Graphics processing is handled by an N10x GPU with up to 512MB of dedicated DDR3 memory. The system firmware is stored on a SPI Flash ROM, while system management is controlled by an ITE8502E EC/KBC in an 80-pin package. Audio is managed by a CX20671 codec, and networking is provided by a BCM57760 LAN IC. Power delivery is managed by a multi-rail architecture including TPS51621, TPS51611, TPS51218, TPS51125, TPS51117, TPC6111, G2997, SC471, SI2301, and FDMC4435BZ ICs, with battery charging handled by an ISL6251 controller supporting 109V to 12.6V input. Memory configuration supports two DDR3 SO-DIMM slots operating at 1.5V with speeds up to 1333MHz.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The motherboard uses an ITE8502E EC/KBC in an 80-pin package.
Q: What is the charging IC and battery voltage range?
A: The charging IC is an ISL6251, supporting a battery voltage range of 109V to 12.6V.
Q: What audio codec is used on this motherboard?
A: The audio codec is a CX20671.
Q: What LAN IC is used on this motherboard?
A: The LAN IC is a BCM57760.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Inventec |
| Model | BAP/BXP30 |
| Motherboard Manufacturer | Inventec |
| Project Code | CS-131X01 |
| Board Number | CS-131X01 |
| Revision | X01 |
| Date | Saturday, May 22, 2010 |
| CPU Platform | Arrandale |
| CPU Socket | RPGA,989 |
| PCH / Southbridge | Ibexpeak-M |
| GPU Type | N10x |
| Graphics Architecture | N10x With DDR3 Maximum 512MB |
| EC / KBC | ITE8502E |
| EC/KBC Package | 80 |
| Audio Codec | CX20671 |
| BIOS / SPI Flash | Flash ROM |
| Charging IC | ISL6251 |
| Charger Architecture | Battery 109V~12.6V |
| Power IC(s) | TPS51621, TPS51611, TPS51218, TPS51125, TPS51117, TPC6111, G2997, SC471, SI2301, FDMC4435BZ |
| RAM Type | DDR3 |
| RAM Architecture | DDR3 1.5V 800/1066/1333MHz |
| RAM Quantity / Slots | 2 |
| Card Reader IC | 5 In 1 CardReader |
| LAN IC | BCM57760 |
| WiFi / WLAN IC | Mini Card (WLAN) |
Technical Summary
This Inventec BAP/BXP30 motherboard, project code CS-131X01 revision X01, is built around the Intel Arrandale CPU platform using an RPGA,989 socket paired with the Ibexpeak-M PCH. Graphics processing is handled by an N10x GPU with up to 512MB of dedicated DDR3 memory. The system firmware is stored on a SPI Flash ROM, while system management is controlled by an ITE8502E EC/KBC in an 80-pin package. Audio is managed by a CX20671 codec, and networking is provided by a BCM57760 LAN IC. Power delivery is managed by a multi-rail architecture including TPS51621, TPS51611, TPS51218, TPS51125, TPS51117, TPC6111, G2997, SC471, SI2301, and FDMC4435BZ ICs, with battery charging handled by an ISL6251 controller supporting 109V to 12.6V input. Memory configuration supports two DDR3 SO-DIMM slots operating at 1.5V with speeds up to 1333MHz.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The motherboard uses an ITE8502E EC/KBC in an 80-pin package.
Q: What is the charging IC and battery voltage range?
A: The charging IC is an ISL6251, supporting a battery voltage range of 109V to 12.6V.
Q: What audio codec is used on this motherboard?
A: The audio codec is a CX20671.
Q: What LAN IC is used on this motherboard?
A: The LAN IC is a BCM57760.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited by a moderator:
