Schematic Acer TravelMate 8372 8372T 8372TZ Inventec BAP30 BXP30 A02 Rev X01 Schematic

[Salim Badakhshan]

Acer TravelMate 8372 8372T 8372TZ Inventec BAP30 BXP30 A02 Rev X01 Schematic

---

Technical Specifications

Parameter	Value
Brand	Inventec
Model	BAP/BXP30
Motherboard Manufacturer	Inventec
Project Code	CS-131X01
Board Number	CS-131X01
Revision	X01
Date	Saturday, May 22, 2010
CPU Platform	Arrandale
CPU Socket	RPGA,989
PCH / Southbridge	Ibexpeak-M
GPU Type	N10x
Graphics Architecture	N10x With DDR3 Maximum 512MB
EC / KBC	ITE8502E
EC/KBC Package	80
Audio Codec	CX20671
BIOS / SPI Flash	Flash ROM
Charging IC	ISL6251
Charger Architecture	Battery 109V~12.6V
Power IC(s)	TPS51621, TPS51611, TPS51218, TPS51125, TPS51117, TPC6111, G2997, SC471, SI2301, FDMC4435BZ
RAM Type	DDR3
RAM Architecture	DDR3 1.5V 800/1066/1333MHz
RAM Quantity / Slots	2
Card Reader IC	5 In 1 CardReader
LAN IC	BCM57760
WiFi / WLAN IC	Mini Card (WLAN)

Technical Summary

This Inventec BAP/BXP30 motherboard, project code CS-131X01 revision X01, is built around the Intel Arrandale CPU platform using an RPGA,989 socket paired with the Ibexpeak-M PCH. Graphics processing is handled by an N10x GPU with up to 512MB of dedicated DDR3 memory. The system firmware is stored on a SPI Flash ROM, while system management is controlled by an ITE8502E EC/KBC in an 80-pin package. Audio is managed by a CX20671 codec, and networking is provided by a BCM57760 LAN IC. Power delivery is managed by a multi-rail architecture including TPS51621, TPS51611, TPS51218, TPS51125, TPS51117, TPC6111, G2997, SC471, SI2301, and FDMC4435BZ ICs, with battery charging handled by an ISL6251 controller supporting 109V to 12.6V input. Memory configuration supports two DDR3 SO-DIMM slots operating at 1.5V with speeds up to 1333MHz.

Technician FAQ

Q: What EC/KBC is used on this motherboard?

A: The motherboard uses an ITE8502E EC/KBC in an 80-pin package.

Q: What is the charging IC and battery voltage range?

A: The charging IC is an ISL6251, supporting a battery voltage range of 109V to 12.6V.

Q: What audio codec is used on this motherboard?

A: The audio codec is a CX20671.

Q: What LAN IC is used on this motherboard?

A: The LAN IC is a BCM57760.

Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.

Indexed motherboard components

Open a component to see every indexed schematic that uses the same part.

CS-131X01 Project Code CS-131X01 Board Number Arrandale CPU Platform N10x Graphics N10x With DDR3 Maximum 512MB Graphics ITE8502E EC / KBC CX20671 Audio Codec ISL6251 Charging / PD IC FDMC4435BZ Power IC G2997 Power IC SC471 Power IC SI2301 Power IC TPC6111 Power IC TPS51117 Power IC TPS51125 Power IC TPS51218 Power IC TPS51611 Power IC TPS51621 Power IC DDR3 RAM Type 5 IN 1 CARDREADER Card Reader IC BCM57760 LAN Controller Mini Card (WLAN) WiFi / WLAN