dell alienware m18x r1.0 compal qbr00 la-8321p
Technical Specifications
Technical Summary
This Dell Avenger MLK motherboard, manufactured by Compal Electronics under project code QBR10 with board number LA-8321P revision 1.0 (A00) dated 2012.02.16, is built around an rPGA Ivy Bridge CPU platform paired with an Intel Panther Point HM77 PCH. The graphics subsystem supports both DIS and UMA configurations via an MXM III connector. System memory consists of four 204-pin DDRIII SO-DIMM slots operating in dual-channel mode at 1600/1333 MHz. The embedded controller is an ENE KB930, and the audio codec is designated Malcolm. Networking is handled by an Atheros AR8151 Gigabit LAN controller. The BIOS is stored on a SPI ROM. Additional notable ICs include the RTS5209 card reader, STDP6038 HDMI level shifter, BQ24715 charging IC, and MAX9736 audio amplifier.
Technician FAQ
Q: What is the board number and project code for this motherboard?
A: The board number is LA-8321P, and the project code is QBR10.
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is an ENE KB930.
Q: Does this motherboard support dGPU to UMA conversion?
A: Yes, the schematic indicates support for both DIS and UMA graphics configurations via the MXM III connector.
Q: What is the memory architecture on this motherboard?
A: It uses four 204-pin DDRIII SO-DIMM slots in dual-channel configuration, supporting 1600/1333 MHz modules.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | DELL |
| Model | Avenger MLK |
| Motherboard Manufacturer | Compal Electronics, Inc. |
| Project Code | QBR10 |
| Board Number | LA-8321P |
| Revision | 1.0 (A00) |
| Date | 2012.02.16 |
| CPU Platform | rPGA Ivy Bridge + FCBGA PCH Panther Point-M + MXM x2 III |
| PCH / Southbridge | Intel Panther Point HM77 |
| GPU Type | MXM III |
| Graphics Architecture | DIS / UMA |
| EC / KBC | ENE KB930 |
| Audio Codec | Malcolm |
| BIOS / SPI Flash | SPI ROM |
| LAN IC | AR8151 |
| RAM Type | DDRIII |
| RAM Architecture | Dual Channel |
| RAM Quantity / Slots | 204pin DDRIII SO-DIMM x4 |
| Card Reader IC | RTS5209 |
| WiFi / WLAN IC | WLAN (Half) |
| Charging IC | BQ24715 |
| Power IC(s) | MAX9736 |
| HDMI Level Shifter | STDP6038 |
Technical Summary
This Dell Avenger MLK motherboard, manufactured by Compal Electronics under project code QBR10 with board number LA-8321P revision 1.0 (A00) dated 2012.02.16, is built around an rPGA Ivy Bridge CPU platform paired with an Intel Panther Point HM77 PCH. The graphics subsystem supports both DIS and UMA configurations via an MXM III connector. System memory consists of four 204-pin DDRIII SO-DIMM slots operating in dual-channel mode at 1600/1333 MHz. The embedded controller is an ENE KB930, and the audio codec is designated Malcolm. Networking is handled by an Atheros AR8151 Gigabit LAN controller. The BIOS is stored on a SPI ROM. Additional notable ICs include the RTS5209 card reader, STDP6038 HDMI level shifter, BQ24715 charging IC, and MAX9736 audio amplifier.
Technician FAQ
Q: What is the board number and project code for this motherboard?
A: The board number is LA-8321P, and the project code is QBR10.
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is an ENE KB930.
Q: Does this motherboard support dGPU to UMA conversion?
A: Yes, the schematic indicates support for both DIS and UMA graphics configurations via the MXM III connector.
Q: What is the memory architecture on this motherboard?
A: It uses four 204-pin DDRIII SO-DIMM slots in dual-channel configuration, supporting 1600/1333 MHz modules.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited:
