dell alienware m18x r2 compal_la-8321p_rev1.0 schematic
dell alienware m18x r2=1=compal_la-8321p_rev1.0.pdf
Technical Specifications
Technical Summary
This Dell Avenger MLK motherboard, manufactured by Compal Electronics with board number LA-8321P and project code QBR10, is built around a PGA Ivy Bridge CPU platform paired with an Intel Panther Point HM77 PCH. The graphics subsystem supports both UMA and DIS configurations via an MXM III connector. System memory consists of four 204-pin DDRIII SO-DIMM slots operating in dual-channel mode at 1600/1333 MHz. The embedded controller is an ENE KB930, while the charging controller is an ENE 3810. Audio is handled by a Malcolm codec, and the BIOS is stored on a SPI ROM. Networking is provided by an Atheros AR8151 Gigabit LAN controller, and a Realtek RTS5209 manages the card reader. The HDMI interface uses an STDP6038 level shifter for LVDS conversion.
Technician FAQ
Q: What is the board number and project code for this motherboard?
A: The board number is LA-8321P and the project code is QBR10.
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is an ENE KB930.
Q: What is the memory architecture and configuration?
A: The motherboard supports dual-channel DDRIII 1600/1333 MHz memory via four 204-pin SO-DIMM slots.
Q: Does this motherboard support dGPU to UMA conversion?
A: The schematic indicates support for both UMA and DIS graphics configurations through the MXM III connector.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
dell alienware m18x r2=1=compal_la-8321p_rev1.0.pdf
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | DELL |
| Model | Avenger MLK |
| Motherboard Manufacturer | Compal Electronics, Inc. |
| Project Code | QBR10 |
| Board Number | LA-8321P |
| Revision | 1.0 (A00) |
| Date | 2012.02.16 |
| CPU Platform | PGA Ivy Bridge + FCBGA PCH Panther Point-M + MXM x2 III |
| PCH / Southbridge | Intel Panther Point HM77 |
| GPU Type | MXM III |
| Graphics Architecture | UMA / DIS |
| EC / KBC | ENE KB930 |
| Audio Codec | Malcolm |
| BIOS / SPI Flash | SPI ROM |
| Charging IC | ENE 3810 |
| RAM Type | DDRIII 1600/1333 MHz |
| RAM Architecture | Dual Channel |
| RAM Quantity / Slots | 204pin DDRIII SO-DIMM x4 |
| Card Reader IC | RTS5209 |
| LAN IC | AR8151 |
| WiFi / WLAN IC | WLAN (Half) |
| HDMI Level Shifter | STDP6038 |
Technical Summary
This Dell Avenger MLK motherboard, manufactured by Compal Electronics with board number LA-8321P and project code QBR10, is built around a PGA Ivy Bridge CPU platform paired with an Intel Panther Point HM77 PCH. The graphics subsystem supports both UMA and DIS configurations via an MXM III connector. System memory consists of four 204-pin DDRIII SO-DIMM slots operating in dual-channel mode at 1600/1333 MHz. The embedded controller is an ENE KB930, while the charging controller is an ENE 3810. Audio is handled by a Malcolm codec, and the BIOS is stored on a SPI ROM. Networking is provided by an Atheros AR8151 Gigabit LAN controller, and a Realtek RTS5209 manages the card reader. The HDMI interface uses an STDP6038 level shifter for LVDS conversion.
Technician FAQ
Q: What is the board number and project code for this motherboard?
A: The board number is LA-8321P and the project code is QBR10.
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is an ENE KB930.
Q: What is the memory architecture and configuration?
A: The motherboard supports dual-channel DDRIII 1600/1333 MHz memory via four 204-pin SO-DIMM slots.
Q: Does this motherboard support dGPU to UMA conversion?
A: The schematic indicates support for both UMA and DIS graphics configurations through the MXM III connector.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited:
