dell latitude v13 lt13tl 6050a2307401-mb rev a02 st 20091211
Technical Specifications
Technical Summary
This Dell LT13TL motherboard, manufactured by Inventec with board number CSA3511 revision A02, is built around the Intel Penryn SFF ULV CPU platform paired with the ICH9M SFF southbridge. Graphics are handled by the Cantiga SFF GPU. The system memory architecture is DDR3 1.5V operating at 800/1066 MHz, with a single SODIMM0 slot. The embedded controller is an MEC5035, and the BIOS SPI flash is provided by SMSC. Audio is managed by a Realtek ALC269Q codec. Power management is handled by a multi-IC solution including TPS51125, TPS51610, TPS51218, TPS51100, SI7326DN, and RT9043, with charging controlled by an ECE5028. Networking is supported by a Broadcom BCM5761E/BCM5756M LAN IC and a Broadcom WLAN module. The HDMI level shifter is an IDT ICS9LPRS3165AKLF, and a card reader controller from SMSC is also present.
Technician FAQ
Q: What is the board number and revision for this Dell motherboard?
A: The board number is CSA3511, revision A02, manufactured by Inventec.
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is an MEC5035.
Q: What is the memory architecture and configuration?
A: The memory architecture is DDR3 1.5V operating at 800/1066 MHz, with a single SODIMM0 slot.
Q: What charging IC is used?
A: The charging IC is an ECE5028.
Q: What LAN IC is present on this motherboard?
A: The LAN IC is a Broadcom BCM5761E/BCM5756M.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | DELL |
| Model | LT13TL |
| Motherboard Manufacturer | INVENTEC |
| Board Number | CSA3511 |
| Revision | A02 |
| Date | 11-Dec-2009 |
| Document Number | EEXXXX-XXXXXX-XX |
| CPU Platform | Penryn SFF ULV |
| PCH / Southbridge | ICH9M SFF |
| GPU Type | Cantiga SFF |
| EC / KBC | MEC5035 |
| Audio Codec | REA ALC269Q |
| BIOS / SPI Flash | SMSC |
| Charging IC | ECE5028 |
| Power IC(s) | TPS51125, TPS51610, TPS51218, TPS51100, SI7326DN, RT9043 |
| RAM Type | DDR3 |
| RAM Architecture | DDR3 1.5V 800/1066 MHz |
| RAM Quantity / Slots | SODIMM0 |
| Card Reader IC | SMSC |
| LAN IC | BCM5761E/BCM5756M |
| WiFi / WLAN IC | Broadcom |
| HDMI Level Shifter | IDT ICS9LPRS3165AKLF |
Technical Summary
This Dell LT13TL motherboard, manufactured by Inventec with board number CSA3511 revision A02, is built around the Intel Penryn SFF ULV CPU platform paired with the ICH9M SFF southbridge. Graphics are handled by the Cantiga SFF GPU. The system memory architecture is DDR3 1.5V operating at 800/1066 MHz, with a single SODIMM0 slot. The embedded controller is an MEC5035, and the BIOS SPI flash is provided by SMSC. Audio is managed by a Realtek ALC269Q codec. Power management is handled by a multi-IC solution including TPS51125, TPS51610, TPS51218, TPS51100, SI7326DN, and RT9043, with charging controlled by an ECE5028. Networking is supported by a Broadcom BCM5761E/BCM5756M LAN IC and a Broadcom WLAN module. The HDMI level shifter is an IDT ICS9LPRS3165AKLF, and a card reader controller from SMSC is also present.
Technician FAQ
Q: What is the board number and revision for this Dell motherboard?
A: The board number is CSA3511, revision A02, manufactured by Inventec.
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is an MEC5035.
Q: What is the memory architecture and configuration?
A: The memory architecture is DDR3 1.5V operating at 800/1066 MHz, with a single SODIMM0 slot.
Q: What charging IC is used?
A: The charging IC is an ECE5028.
Q: What LAN IC is present on this motherboard?
A: The LAN IC is a Broadcom BCM5761E/BCM5756M.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited:
