dell_m17x ab4400_delh-41-ab4400-aoog_delh-40gab4400-a_rev-2.0 schematic
dell_m17x_ab4400_delh-41-ab4400-aoog_delh-40gab4400-a_rev-2.0.pdf
Technical Specifications
Technical Summary
This Dell/FLEX motherboard, documented under number X02 dated October 22, 2009, is built around the Arrandale/Clarksfield CPU platform using a 989 rPGA socket paired with the Ibex Peak M PCH in a 1071-pin PBGA package. The system employs an ITE8512E EC/KBC in a 128-pin LQFP and an IDT92HD73C audio codec in a 56-pin LQFP. The BIOS SPI flash is a 12MB device housed in an 8-pin SO8W package. Power management is handled by a MAX8731 charger IC, with voltage regulation provided by MAX17030, MAX17020, MAX8792, MAX8632, and RT9025-25PSP power ICs. Memory architecture consists of DDR3 SO-DIMM modules in a 204-pin configuration. The board features a RICOH R5U230 card reader in a QFN-48 package, a HANKSVILLE PHY for LAN, and supports a WiMax Half Mini-Card for WLAN. Graphics are provided via an MXM connector interface.
Technician FAQ
Q: What BIOS flash IC is used on this motherboard?
A: The BIOS SPI flash is a 12MB device in an 8-pin SO8W package.
Q: What EC/KBC controller is used on this motherboard?
A: The EC/KBC is an ITE8512E in a 128-pin LQFP package.
Q: What is the charging IC on this motherboard?
A: The charging IC is a MAX8731.
Q: What is the memory architecture of this motherboard?
A: The memory architecture is DDR3 SO-DIMM in a 204-pin configuration.
Q: What is the graphics interface on this motherboard?
A: The graphics interface uses an MXM connector.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
dell_m17x_ab4400_delh-41-ab4400-aoog_delh-40gab4400-a_rev-2.0.pdf
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Dell |
| Motherboard Manufacturer | FLEX |
| Document Number | X02 |
| Date | Thursday, October 22, 2009 |
| CPU Platform | Arrandale / Clarksfield |
| CPU Socket | 989 rPGA |
| PCH / Southbridge | Ibex Peak M (1071 Pin PBGA) |
| EC / KBC | ITE8512E (128 Pin LQFP) |
| Audio Codec | IDT92HD73C (56 LQFP) |
| BIOS / SPI Flash | 12MB (8 Pin SO8W) |
| Charging IC | MAX8731 |
| Power IC(s) | MAX17030, MAX17020, MAX8792, MAX8632, RT9025-25PSP |
| RAM Type | DDR3 |
| RAM Architecture | DDR3-SODIMM (204P) |
| Card Reader IC | RICOH R5U230 (QFN 48) |
| LAN IC | HANKSVILLE PHY |
| WiFi / WLAN IC | WiMax Half MINI-CARD |
| GPU Type | MXM CONNECTOR |
| Graphics Architecture | MXM |
Technical Summary
This Dell/FLEX motherboard, documented under number X02 dated October 22, 2009, is built around the Arrandale/Clarksfield CPU platform using a 989 rPGA socket paired with the Ibex Peak M PCH in a 1071-pin PBGA package. The system employs an ITE8512E EC/KBC in a 128-pin LQFP and an IDT92HD73C audio codec in a 56-pin LQFP. The BIOS SPI flash is a 12MB device housed in an 8-pin SO8W package. Power management is handled by a MAX8731 charger IC, with voltage regulation provided by MAX17030, MAX17020, MAX8792, MAX8632, and RT9025-25PSP power ICs. Memory architecture consists of DDR3 SO-DIMM modules in a 204-pin configuration. The board features a RICOH R5U230 card reader in a QFN-48 package, a HANKSVILLE PHY for LAN, and supports a WiMax Half Mini-Card for WLAN. Graphics are provided via an MXM connector interface.
Technician FAQ
Q: What BIOS flash IC is used on this motherboard?
A: The BIOS SPI flash is a 12MB device in an 8-pin SO8W package.
Q: What EC/KBC controller is used on this motherboard?
A: The EC/KBC is an ITE8512E in a 128-pin LQFP package.
Q: What is the charging IC on this motherboard?
A: The charging IC is a MAX8731.
Q: What is the memory architecture of this motherboard?
A: The memory architecture is DDR3 SO-DIMM in a 204-pin configuration.
Q: What is the graphics interface on this motherboard?
A: The graphics interface uses an MXM connector.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited:
