fujitsu siemens esprimo mobile u9200 inventec s11d santa rosa 6050a2163301 rev-0.3.pdf 1
Technical Specifications
Technical Summary
This Inventec Corporation S11D (Santa Rosa) motherboard schematic, revision 0.3 dated May 23, 2007, documents a platform built around the Merom CPU in a uFCPGA 478-pin socket, paired with the Crestline GM (MCH 965GM/GML) graphics and ICH8M southbridge. The board supports two DDR2 SO-DIMM slots operating at 1.8V with 533/667MHz speeds. The embedded controller is an ITE8512F, and the audio subsystem is managed by an ALC262 codec. Networking is handled by a Marvell 88E8055 LAN IC, and a Genesys Logic GL827 card reader controller is present. The system firmware resides on a generic FlashROM device. The block diagram indicates support for S0-S3 and S0-S2 power states, with a clock generator IC identified as ICS9LPRS365AGLF.
Technician FAQ
Q: What is the board number and project code for this motherboard?
A: The board number is S11D (Merom+Crestline+ICH8M), and the project code is S11D (Santa Rosa).
Q: What EC/KBC is used on this motherboard?
A: The embedded controller/keyboard controller is an ITE8512F.
Q: What is the CPU socket and platform for this motherboard?
A: The CPU platform is Merom, using a uFCPGA 478-pin socket.
Q: What memory architecture does this motherboard support?
A: The motherboard supports two DDR2 SO-DIMM slots at 1.8V with 533/667MHz speeds.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Inventec Corporation |
| Motherboard Manufacturer | Inventec Corporation |
| Project Code | S11D (Santa Rosa) |
| Board Number | S11D (Merom+Crestline+ICH8M) |
| Revision | 0.3 |
| Date | Wednesday, May 23, 2007 |
| CPU Platform | Merom |
| CPU Socket | uFCPGA 478pin |
| PCH / Southbridge | ICH8M |
| GPU Type | Crestline GM |
| Graphics Architecture | MCH 965GM/GML |
| EC / KBC | ITE8512F |
| Audio Codec | ALC262 |
| BIOS / SPI Flash | FlashROM |
| LAN IC | 88E8055 |
| RAM Type | DDR2 1.8V 533/667MHz |
| RAM Architecture | SO-DIMM |
| RAM Quantity / Slots | 2 |
| Card Reader IC | GL827 |
| WiFi / WLAN IC | 88E8055 |
Technical Summary
This Inventec Corporation S11D (Santa Rosa) motherboard schematic, revision 0.3 dated May 23, 2007, documents a platform built around the Merom CPU in a uFCPGA 478-pin socket, paired with the Crestline GM (MCH 965GM/GML) graphics and ICH8M southbridge. The board supports two DDR2 SO-DIMM slots operating at 1.8V with 533/667MHz speeds. The embedded controller is an ITE8512F, and the audio subsystem is managed by an ALC262 codec. Networking is handled by a Marvell 88E8055 LAN IC, and a Genesys Logic GL827 card reader controller is present. The system firmware resides on a generic FlashROM device. The block diagram indicates support for S0-S3 and S0-S2 power states, with a clock generator IC identified as ICS9LPRS365AGLF.
Technician FAQ
Q: What is the board number and project code for this motherboard?
A: The board number is S11D (Merom+Crestline+ICH8M), and the project code is S11D (Santa Rosa).
Q: What EC/KBC is used on this motherboard?
A: The embedded controller/keyboard controller is an ITE8512F.
Q: What is the CPU socket and platform for this motherboard?
A: The CPU platform is Merom, using a uFCPGA 478-pin socket.
Q: What memory architecture does this motherboard support?
A: The motherboard supports two DDR2 SO-DIMM slots at 1.8V with 533/667MHz speeds.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited:
