File Request Hp 14 -am052nr bios needed

[rchgraham44944]

Device Model

HP 14- am052nr

Hello, kindly assist if you can with this bios file. I tried several attempts at getting it but my knowledge has failed me. Please see info belowof notebook specifics and image of bios chip, thank you.

 

[Vahab Hemmati]

Hi

Bios - HP 14-am077na DINERINL-6050A2823301-MB-A01 Bios-Ver F.35 Rev.A Intel Processors | BIOS Fix for Black Screen / No Display

Download BIOS repair file for HP 14-am077na DINERINL-6050A2823301-MB-A01 Bios-Ver F.35 Rev.A Intel Processors. Useful for black screen, no display and motherboard-level troubleshooting.

dr-bios.com

 

[rchgraham44944]

Thanks so very much!

 

[rchgraham44944]

How do i know which on to flash? Whenever I flash these I get verification errors on address 10H etc. Am I doing something wrong here?

 

[Vahab Hemmati]

How do i know which on to flash? Whenever I flash these I get verification errors on address 10H etc. Am I doing something wrong here?

you need to test files one by one
those bios files are OK
maybe errors are related to programmer device

 

[rchgraham44944]

Im using EZP2019+, thanks I have gone through all. Maybe its my methodology, I will review. Thank you so much again.

 

[Vahab Hemmati]

you are welcome
good luck

 

[rchgraham44944]

happy new year to you, unfortunately, I have still not gotten to resolve this issue as whenever I attempt a flash it keeps saying that the data is too much for the chip. I have checked online and downloaded and hex editor but really dont know what to look for to edit and how to do it.

 

[Ahmad Kor]

Please send the original backup.

 

[rchgraham44944]

Sure, please see attached

 

[Ahmad Kor]

this file should work for you :

https://dr-bios.com/attachments/bid-081dc-bin.10754/

 

[rchgraham44944]

thanks so much, Ill give it a try

 

[Ahmad Kor]

good luck

 

[rchgraham44944]

Well, a pleasant morning to you all! And what a wonderful day it is in Jamaica too, a great start for the new year....happy to see the end of 2020. I havent slept as yet and after flashing the above bios, verified and installed the chip, there is no power light, I have 19v, 5 v and 3.3v power rails evident. Power button says 3.3v steady even when depressed (not as depressed as I am it seems). May I solicit for additional assistance?

 

[Ahmad Kor]

Thank you, I wish you a good year
I recommend you to check the other components. also you could ask for help in the technical support section :

Technical Support

Golden premium members can access technical support and discuss their repairing problems and issues with them and get help.

dr-bios.com