hp compaq 6530b 6730b 6050a2219901-mb-a03 1
Technical Specifications
Technical Summary
This Inventec AX1 motherboard, project code CSA3692 revision V1.2 dated 26-Oct-2007, is built around the Intel Cantiga platform with a Penryn CPU and an ICH9-M southbridge. Graphics are handled by a discrete NV100 GPU. The system uses DDR2 memory across two SODIMM slots operating at 667 MHz. The embedded controller is a KBC1070, and the BIOS is stored on a FWH/SPI flash device. Power management is handled by a BQ24740 system charger and selector, with multiple power ICs including ADP3208, ADP3209, TPS51117, TPS51120, APL5913, and G2997. Networking is provided by a BCM5784 LAN controller, and wireless connectivity is via a WLAN/Robson module. The audio codec is an AZALIA_1984, and the system includes a TPM V1.2 module. Additional controllers include an SMSC USB2228 card reader, an Agere FW322-07 1394 controller, an ICS9LPRS397 clock generator, an ADT7421 thermal sensor, an STMicro LIS302DL accelerometer, and a Kahuna Lite2 DVI controller.
Technician FAQ
Q: What is the board number and revision of this motherboard?
A: The board number is CSA3692, and the revision is V1.2.
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is a KBC1070.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | INVENTEC |
| Model | AX1 |
| Motherboard Manufacturer | INVENTEC |
| Project Code | CSA3692 |
| Board Number | CSA3692 |
| Revision | V1.2 |
| Date | 26-Oct-2007 |
| CPU Platform | Cantiga / Penryn |
| PCH / Southbridge | ICH9-M |
| GPU Type | Discrete |
| dGPU Chip Number | NV100 |
| EC / KBC | KBC1070 |
| Audio Codec | AZALIA_1984 |
| BIOS / SPI Flash | FWH/SPI |
| Charging IC | BQ24740 |
| Charger Architecture | System Charger & Selector |
| Power IC(s) | ADP3208, ADP3209, TPS51117, TPS51120, APL5913, G2997 |
| RAM Type | DDR2 |
| RAM Architecture | DDR2 Interface, 667 MHz |
| RAM Quantity / Slots | 2 (DDR2-DIMM0, DDR2-DIMM1) |
| LAN IC | BCM5784 |
| WiFi / WLAN IC | WLAN/Robson Module |
| Card Reader IC | SMSC USB2228 |
| USB Hub IC | Agere FW322-07 |
| Thermal Sensor | ADT7421 |
| Super I/O | N217 |
| Clock Generator | ICS9LPRS397 |
| TPM | TPM V1.2 |
| DVI Controller | Kahuna Lite2 |
| 1394 Controller | Agere FW322-07 |
| Accelerometer | STMicro LIS302DL |
| Finger Print Controller | Finger Print board |
Technical Summary
This Inventec AX1 motherboard, project code CSA3692 revision V1.2 dated 26-Oct-2007, is built around the Intel Cantiga platform with a Penryn CPU and an ICH9-M southbridge. Graphics are handled by a discrete NV100 GPU. The system uses DDR2 memory across two SODIMM slots operating at 667 MHz. The embedded controller is a KBC1070, and the BIOS is stored on a FWH/SPI flash device. Power management is handled by a BQ24740 system charger and selector, with multiple power ICs including ADP3208, ADP3209, TPS51117, TPS51120, APL5913, and G2997. Networking is provided by a BCM5784 LAN controller, and wireless connectivity is via a WLAN/Robson module. The audio codec is an AZALIA_1984, and the system includes a TPM V1.2 module. Additional controllers include an SMSC USB2228 card reader, an Agere FW322-07 1394 controller, an ICS9LPRS397 clock generator, an ADT7421 thermal sensor, an STMicro LIS302DL accelerometer, and a Kahuna Lite2 DVI controller.
Technician FAQ
Q: What is the board number and revision of this motherboard?
A: The board number is CSA3692, and the revision is V1.2.
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is a KBC1070.
Attachments
Last edited by a moderator:
