Schematic hp dm1 quanta nm9 schematic

Admin

Founder
Staff member
Admin

Reputation:

hp dm1 quanta nm9




Technical Specifications

ParameterValue
BrandQuanta Computer Inc.
Project CodeButternut (NM9)
Document Number5544332211DDCCBBAA
Revision1A131
DateTuesday, May 24, 2011
CPU PlatformAMD Ontario
PCH / SouthbridgeHUDSON-M1
EC / KBCIT8518
Audio CodecAZALIA HD AUDIO
BIOS / SPI FlashSPI Flash
Charging ICOZ8681
Charger ArchitectureSYSTEM CHARGER (OZ8681)
Power IC(s)RT8223, RT8228AZ, RT8207, OZ8380, G5173, SLG55448VTR
RAM TypeDDR3
RAM ArchitectureSingle Channel
RAM Quantity / Slots2 (SO-DIMM-1, SO-DIMM-2)
LAN ICRTL8111E
WiFi / WLAN ICWLAN
Card Reader ICCard Reader

Technical Summary

The Quanta Butternut (NM9) motherboard is built around the AMD Ontario APU platform paired with the HUDSON-M1 Fusion Controller Hub. System management is handled by an IT8518 EC/KBC, while the BIOS resides on a SPI Flash memory. Audio is provided by an AZALIA HD Audio codec, and networking is supported by a Realtek RTL8111E LAN IC alongside an integrated WLAN module. The charging architecture is managed by an OZ8681 system charger, with power regulation handled by RT8223, RT8228AZ, RT8207, OZ8380, G5173, and SLG55448VTR ICs. Memory configuration consists of two DDR3 SO-DIMM slots operating in single-channel mode at 1333 MT/s. A card reader IC is also integrated into the design.

Technician FAQ

Q: What EC/KBC is used on this motherboard?

A: The motherboard uses an IT8518 EC/KBC.

Q: What is the charging IC and architecture?

A: The system charger is an OZ8681, with the architecture labeled as SYSTEM CHARGER (OZ8681).

Q: What LAN IC is used?

A: The LAN IC is a Realtek RTL8111E.

Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
 

Attachments

  • HP DM1=Quanta NM9.pdf
    2.4 MB · Views: 9
Last edited:
Who is viewing this thread?

There are currently 0 members watching this topic

Users who has read this topic
Top