Salim Badakhshan
Registered
INTEL 10nm ICL-U RDK Schematic
Technical Specifications
Technical Summary
This Intel ICL-U RDK REV1P0 reference design kit, documented under number 56287541DDCB87CAA16243B32, is built around the Intel ICL-U platform with a PCH southbridge. Memory architecture consists of two DDR4 SODIMM slots. The system flash is implemented as SPI NOR. The embedded controller is present for system management. Networking is handled by a Jacksonville LAN PHY chip. Audio is managed by a dedicated audio codec with an amplifier. Power management includes an IMVP9 controller and a buck-boost battery charger power stage. The design features USB 2/3 connectivity, SD card logic, a VGA level shifter, and M.2 Key-E socket for WLAN/BT modules. Thermal monitoring is provided by thermistors. The board includes Type-C port controllers with retimers for Thunderbolt support.
Technician FAQ
Q: What is the board number and project code for this Intel reference design?
A: The board number is ICL-U RDK REV1P0, and the project code is icl_rvpc_u.
Q: What type of memory does this motherboard support?
A: This motherboard supports DDR4 SODIMM memory across two channels.
Q: What type of system flash is used on this board?
A: The system flash is SPI NOR, referenced as SYSTEM FLASH (SPI NOR).
Q: What charging architecture is implemented on this board?
A: The charging architecture is a buck-boost battery charger with a dedicated power stage.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | INTEL |
| Motherboard Manufacturer | INTEL |
| Project Code | icl_rvpc_u |
| Board Number | ICL-U RDK REV1P0 |
| Revision | 1P0 |
| Document Number | 56287541DDCB87CAA16243B32 |
| CPU Platform | ICL-U |
| PCH / Southbridge | PCH |
| RAM Type | DDR4 SODIMM |
| RAM Architecture | DDR4 SODIMM |
| RAM Quantity / Slots | 2 |
| LAN IC | JACKSONVILLE LAN PHY CHIP |
| Audio Codec | AUDIO CODEC |
| EC / KBC | EMBEDDED CONTROLLER |
| Charging IC | BUCK BOOST BATTERY CHARGER-POWER STAGE |
| Charger Architecture | BUCK BOOST BATTERY CHARGER |
| Power IC(s) | IMVP9 CONTROLLER |
| Card Reader IC | SD CARD LOGIC |
| WiFi / WLAN IC | M.2 SOCKET 1 WLAN/BT MODULE KEY-E CONNECTOR |
| HDMI Level Shifter | VGA LEVEL SHIFTER |
| USB Hub IC | USB 2/3 X1 |
| Thermal Sensor | THERMISTERS |
| BIOS / SPI Flash | SYSTEM FLASH (SPI NOR) |
Technical Summary
This Intel ICL-U RDK REV1P0 reference design kit, documented under number 56287541DDCB87CAA16243B32, is built around the Intel ICL-U platform with a PCH southbridge. Memory architecture consists of two DDR4 SODIMM slots. The system flash is implemented as SPI NOR. The embedded controller is present for system management. Networking is handled by a Jacksonville LAN PHY chip. Audio is managed by a dedicated audio codec with an amplifier. Power management includes an IMVP9 controller and a buck-boost battery charger power stage. The design features USB 2/3 connectivity, SD card logic, a VGA level shifter, and M.2 Key-E socket for WLAN/BT modules. Thermal monitoring is provided by thermistors. The board includes Type-C port controllers with retimers for Thunderbolt support.
Technician FAQ
Q: What is the board number and project code for this Intel reference design?
A: The board number is ICL-U RDK REV1P0, and the project code is icl_rvpc_u.
Q: What type of memory does this motherboard support?
A: This motherboard supports DDR4 SODIMM memory across two channels.
Q: What type of system flash is used on this board?
A: The system flash is SPI NOR, referenced as SYSTEM FLASH (SPI NOR).
Q: What charging architecture is implemented on this board?
A: The charging architecture is a buck-boost battery charger with a dedicated power stage.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited by a moderator:
