Run your repair shop like a pro – for just $10/month!
Finty keeps your repair business organized and efficient without breaking the bank. Explore live examples of tickets, tracking, invoices, and more.
💻 Live Demo 🛠️ Finty Software 💬 Contact Support

Unlock Bios Password L570 bios password removal

Nuclearpunch

Registered

reputation_scoree

I am getting bios supervisor password on every bios that I flash through ch341a...

The attached bios at least get black screen with only fan working.

Do you think that patching attached bios and flashing it could remove the password for good?
Could you patch it please if so?
 

Attachments

  • L570_outimage.rar.zip
    5.4 MB · Views: 2

Vahab Hemmati

Support Team
Staff member
Admin
Registered

Reputation:

send motherboard model
 

Vahab Hemmati

Support Team
Staff member
Admin
Registered

Reputation:

search on motherboard under all stickers and heat sink
 

Nuclearpunch

Registered

reputation_scoree

it seems like it's the motherboard's referece ?
 

Attachments

  • KakaoTalk_20230104_211651919.jpg
    KakaoTalk_20230104_211651919.jpg
    406.7 KB · Views: 4

Vahab Hemmati

Support Team
Staff member
Admin
Registered

Reputation:

program EC to remove password


pins=32 LEFT DOWN 0.5MM JENK=7 TCK=19 TMS=20 TDI=21 TDO=10
 

Attachments

  • EC.bin
    128 KB · Views: 4

Nuclearpunch

Registered

reputation_scoree

program EC to remove password


pins=32 LEFT DOWN 0.5MM JENK=7 TCK=19 TMS=20 TDI=21 TDO=10
I'm sorry I'm new to all this. And I am not sure to follow you.

Can I flash your attachments through a rom writer ?

Or I need to access windows and do something on cmd ?
 

Vahab Hemmati

Support Team
Staff member
Admin
Registered

Reputation:

I'm sorry I'm new to all this. And I am not sure to follow you.

Can I flash your attachments through a rom writer ?

Or I need to access windows and do something on cmd ?
you need programmer device to do that
 

Nuclearpunch

Registered

reputation_scoree

and could you tell me what does it mean ?

pins=32 LEFT DOWN 0.5MM JENK=7 TCK=19 TMS=20 TDI=21 TDO=10

thanks a lot for your hard work
 

Vahab Hemmati

Support Team
Staff member
Admin
Registered

Reputation:

Do I apply your EC.bin on rom chip or there is a specific chip which manange only the password of the supervisor password ?

thanks again
yes it has EC chip which password is stored on that
its not rom chip
 

Nuclearpunch

Registered

reputation_scoree

yes it has EC chip which password is stored on that
its not rom chip
I found out that the one in red circle is a bios rom chip.

Can you please make a circle on the EC chip which password is stored?

Thanks very much
 

Attachments

  • IMG_20230104_232332.jpg
    IMG_20230104_232332.jpg
    1.9 MB · Views: 2

Vahab Hemmati

Support Team
Staff member
Admin
Registered

Reputation:

I found out that the one in red circle is a bios rom chip.

Can you please make a circle on the EC chip which password is stored?

Thanks very much
the one which written NUVOTON on it
 

Nuclearpunch

Registered

reputation_scoree

the one which written NUVOTON on it
I saw a little bit how to flash NUVOTON chip and it seems much harder than flashing bios rom chip...

And I think I don't have the necessary skill for it.

Do you have another solution to remove supervisor password?

In the video below, it seems like the dude only replaced a bios rom (probably patched one) to remove supervisor password??


 

Ali Shaikh

ali sheikh
Staff member
Registered

Reputation:

"Instructions for use"

Remove all battery and CMOS battery

press F1 to enter setup: password 1234
wait 20sec or more.
Enter any ID to hardware Id.
Press 2x space bar when asked.
Turn off the computer.
and restore your original bios .

Enjoy.

If 2x 5beep, it's normal.
I didn't do checksum but it must light up anyway.
Wait minimum 30sec before screen logo light on. Must turn on/off several times by itself.
 

Attachments

  • L570_outimage_PATCHED.bin
    16 MB · Views: 5

Nuclearpunch

Registered

reputation_scoree

"Instructions for use"

Remove all battery and CMOS battery

press F1 to enter setup: password 1234
wait 20sec or more.
Enter any ID to hardware Id.
Press 2x space bar when asked.
Turn off the computer.
and restore your original bios .

Enjoy.

If 2x 5beep, it's normal.
I didn't do checksum but it must light up anyway.
Wait minimum 30sec before screen logo light on. Must turn on/off several times by itself.
thanks so much my friend it rly helped me
 
Who is viewing this thread?

There are currently 0 members watching this topic

Top