Technical Support Lenovo ideapad 320 ram disable

[Sophonias Ethiopia]

DG421 DG521 DG721 NM-B241 REV 1.0

I removed the resistors and disabled the on board ram, but windows stuck on after working a while and also couldn't finish the installation of windows
Any solutions? Tnx

 

[Sophonias Ethiopia]

DG421 DG521 DG721 NM-B241 REV 1.0

I removed the resistors and disabled the on board ram, but windows stuck on after working a while and also couldn't finish the installation of windows
Any solutions? Tnx

Any help?

 

[Ahmad Safari]

There are several modes for moving resistors, which may not be correct, and you will need to move the resistor again to get the result.

 

[Sophonias Ethiopia]

There are several modes for moving resistors, which may not be correct, and you will need to move the resistor again to get the result.

Can you give me examples of the modes
thank you

 

[Ahmad Safari]

I checked the schematic of this model. In this model, you must put the following resistors.
rc1631
rc1632

If you moved the same parts, your operation is correct.

 

[Sophonias Ethiopia]

I checked the schematic of this model. In this model, you must put the following resistors.
rc1631
rc1632

If you moved the same parts, your operation is correct.

Yes I moved rc 1631 and rc 1632 just like the pic below and worked fine with other ram
but after loading windows or in the middle of windows instalation it gets stuck and no response do I have to program the bios or what should be done thank you for the reply