Salim Badakhshan
Registered
MSI MS-9518 Rev 00a 00b 100 Schematic
Technical Specifications
Technical Summary
This MSI MS-9518 motherboard schematic, dated July 30, 2002, is identified by board number MS-9518 and PCB number P05-951800AF. The document includes a SCSI LVD connector and a MiniPCI connector (J1X_MiniPCI Gordon Finger), indicating the board is designed for SCSI and MiniPCI expansion. The schematic references PCI bus signals such as PCLK_SCSI, PCIRST#_DEV2, and various AD and C/BE lines, confirming a PCI-based architecture. The board operates with 3.3V and 5V power rails, as indicated by VCC3 and VCC5 references. Audio connectivity is supported through AC97 signals including AC_SDATA_OUT, AC_SDATA_IN, AC_BIT_CLK, AC_SYNC, and AC_RESET#. The board also features multiple RJ45 connectors (8PMJ-1 through 8PMJ-8) with LED indicators for network activity.
Technician FAQ
Q: What is the board number and PCB number for this motherboard?
A: The board number is MS-9518, and the PCB number is P05-951800AF.
Q: What expansion interfaces are documented in this schematic?
A: The schematic includes a SCSI LVD connector and a MiniPCI connector (J1X_MiniPCI Gordon Finger).
Q: What audio interface is supported on this board?
A: The board supports AC97 audio, with signals including AC_SDATA_OUT, AC_SDATA_IN, AC_BIT_CLK, AC_SYNC, and AC_RESET#.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
Technical Summary
This MSI MS-9518 motherboard, revision 0B13, dated September 13, 2002, is documented under drawing number P05-951800B-T53. The board is built around an Adaptec AIC7892 SCSI controller, supporting LVD SCSI connectivity. Power regulation is handled by an RC1117S1324ADJ adjustable voltage regulator. The system firmware is stored on an ATL-512x8-1us SPI flash memory IC in an SOIC8 package. A 40M-3.3V-DF-S3 oscillator provides the primary clock source. The design includes multiple PCI slots and a MiniPCI connector, with extensive SCSI bus routing for differential signaling.
Technician FAQ
Q: What is the board number and revision of this motherboard?
A: The board number is MS-9518, revision 0B13.
Q: What SCSI controller is used on this motherboard?
A: The SCSI controller is an Adaptec AIC7892.
Q: What BIOS flash IC is used on this motherboard?
A: The BIOS flash IC is an ATL-512x8-1us in an SOIC8 package.
Q: What is the document number for this motherboard?
A: The document number is P05-951800B-T53.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
Technical Summary
The MSI MS-9518 motherboard, dated November 1, 2002, is built around the SCSI LVD platform. The system is controlled by an AIC7892 L3Y EC/KBC, which also serves as the LAN, card reader, USB hub, and HDMI level shifter IC. The BIOS is stored on an ATL-512x8-1us SOIC8 flash IC, providing 512x8 memory architecture in a single slot. Power regulation is handled by an RC1117S charging IC. The board features a MiniPCI Gordon Finger slot for WLAN connectivity, with a 5V PCI environment and SCSI LVD connector for peripheral expansion.
Technician FAQ
Q: What BIOS IC model is used on this motherboard?
A: The BIOS flash is an ATL-512x8-1us in a SOIC8 package.
Q: What EC/KBC chip is used on this motherboard?
A: The EC/KBC is an AIC7892 in an L3Y package.
Q: What is the memory architecture of this motherboard?
A: The memory is 512x8 architecture with a single slot.
Q: What is the charging IC on this motherboard?
A: The charging IC is an RC1117S.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | MSI |
| Board Number | MS-9518 |
| Date | Tuesday, July 30, 2002 |
| Document Number | MS-9518 |
| PCB Number | P05-951800AF |
Technical Summary
This MSI MS-9518 motherboard schematic, dated July 30, 2002, is identified by board number MS-9518 and PCB number P05-951800AF. The document includes a SCSI LVD connector and a MiniPCI connector (J1X_MiniPCI Gordon Finger), indicating the board is designed for SCSI and MiniPCI expansion. The schematic references PCI bus signals such as PCLK_SCSI, PCIRST#_DEV2, and various AD and C/BE lines, confirming a PCI-based architecture. The board operates with 3.3V and 5V power rails, as indicated by VCC3 and VCC5 references. Audio connectivity is supported through AC97 signals including AC_SDATA_OUT, AC_SDATA_IN, AC_BIT_CLK, AC_SYNC, and AC_RESET#. The board also features multiple RJ45 connectors (8PMJ-1 through 8PMJ-8) with LED indicators for network activity.
Technician FAQ
Q: What is the board number and PCB number for this motherboard?
A: The board number is MS-9518, and the PCB number is P05-951800AF.
Q: What expansion interfaces are documented in this schematic?
A: The schematic includes a SCSI LVD connector and a MiniPCI connector (J1X_MiniPCI Gordon Finger).
Q: What audio interface is supported on this board?
A: The board supports AC97 audio, with signals including AC_SDATA_OUT, AC_SDATA_IN, AC_BIT_CLK, AC_SYNC, and AC_RESET#.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | MSI |
| Board Number | MS-9518 |
| Revision | 0B13 |
| Date | Friday, September 13, 2002 |
| Document Number | P05-951800B-T53 |
| SCSI Controller | AIC7892 |
| Voltage Regulator | RC1117S1324ADJ |
| BIOS / SPI Flash | ATL-512x8-1us-SOIC8 |
| BIOS Flash Package | SOIC8 |
| Oscillator | 40M-3.3V-DF-S3 |
Technical Summary
This MSI MS-9518 motherboard, revision 0B13, dated September 13, 2002, is documented under drawing number P05-951800B-T53. The board is built around an Adaptec AIC7892 SCSI controller, supporting LVD SCSI connectivity. Power regulation is handled by an RC1117S1324ADJ adjustable voltage regulator. The system firmware is stored on an ATL-512x8-1us SPI flash memory IC in an SOIC8 package. A 40M-3.3V-DF-S3 oscillator provides the primary clock source. The design includes multiple PCI slots and a MiniPCI connector, with extensive SCSI bus routing for differential signaling.
Technician FAQ
Q: What is the board number and revision of this motherboard?
A: The board number is MS-9518, revision 0B13.
Q: What SCSI controller is used on this motherboard?
A: The SCSI controller is an Adaptec AIC7892.
Q: What BIOS flash IC is used on this motherboard?
A: The BIOS flash IC is an ATL-512x8-1us in an SOIC8 package.
Q: What is the document number for this motherboard?
A: The document number is P05-951800B-T53.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | MSI |
| Model | MS-9518 |
| Board Number | MS-9518 |
| Date | Friday, November 01, 2002 |
| CPU Platform | SCSI LVD |
| EC / KBC | AIC7892 |
| EC/KBC Package | L3Y |
| BIOS / SPI Flash | ATL-512x8-1us-SOIC8 |
| BIOS Flash Exact Model | ATL-512x8-1us-SOIC8 |
| BIOS Flash Package | SOIC8 |
| Charging IC | RC1117S |
| Power IC(s) | RC1117S |
| RAM Type | ATL-512x8-1us |
| RAM Architecture | 512x8 |
| RAM Quantity / Slots | 1 |
| LAN IC | AIC7892 |
| WiFi / WLAN IC | MiniPCI Gordon Finger |
| Card Reader IC | AIC7892 |
| USB Hub IC | AIC7892 |
| HDMI Level Shifter | AIC7892 |
Technical Summary
The MSI MS-9518 motherboard, dated November 1, 2002, is built around the SCSI LVD platform. The system is controlled by an AIC7892 L3Y EC/KBC, which also serves as the LAN, card reader, USB hub, and HDMI level shifter IC. The BIOS is stored on an ATL-512x8-1us SOIC8 flash IC, providing 512x8 memory architecture in a single slot. Power regulation is handled by an RC1117S charging IC. The board features a MiniPCI Gordon Finger slot for WLAN connectivity, with a 5V PCI environment and SCSI LVD connector for peripheral expansion.
Technician FAQ
Q: What BIOS IC model is used on this motherboard?
A: The BIOS flash is an ATL-512x8-1us in a SOIC8 package.
Q: What EC/KBC chip is used on this motherboard?
A: The EC/KBC is an AIC7892 in an L3Y package.
Q: What is the memory architecture of this motherboard?
A: The memory is 512x8 architecture with a single slot.
Q: What is the charging IC on this motherboard?
A: The charging IC is an RC1117S.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited by a moderator:
