Salim Badakhshan
Registered
MSI MS-9596 Rev 10A 10B 10C 10D 10E 20B 100 30 Schematic
Technical Specifications
Technical Summary
This MSI motherboard, identified by board number MS-9596-00 and PCB number PCB_MS-9596-00, is documented under schematic sheet B1 with a date of Tuesday, February 24, 2004. The schematic details the ICH (I/O Controller Hub) connectivity, including IDE, floppy, and fan control interfaces. The fan control circuitry utilizes FDS4935 dual MOSFETs and N5817 Schottky diodes for power switching, with 2N7002 N-channel MOSFETs for signal-level control. The board features multiple fan headers (FAN1, FAN2, FAN3, FAN4) with PWM control signals (HM_PWM1 through HM_PWM8) and tachometer feedback (HW_TACH1 through HW_TACH8). Power delivery includes 12V and VCC rails with electrolytic capacitors rated at 470uF and 1000uF for bulk storage.
Technician FAQ
Q: What is the board number for this MSI motherboard?
A: The board number is MS-9596-00, with PCB number PCB_MS-9596-00.
Q: What fan control components are used on this motherboard?
A: The fan control circuitry uses FDS4935 dual N-channel MOSFETs, 2N7002 N-channel MOSFETs, and N5817 Schottky diodes.
Q: How many fan headers and PWM channels are documented?
A: The schematic documents four fan headers (FAN1, FAN2, FAN3, FAN4) with eight PWM control signals (HM_PWM1 through HM_PWM8) and eight tachometer feedback signals (HW_TACH1 through HW_TACH8).
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
Technical Summary
This MSI motherboard, identified by board number MS-9596-100, is documented under schematic revision C22 with document number B12, dated Thursday, April 08, 2004. The schematic includes fan control circuitry featuring components such as the D03-0443503-V02 P-MOS transistor and 2N7002 N-channel MOSFETs for fan output management. The board layout specifies controlled impedance traces with Layer 1 and Layer 8 set to 50 ohms. The design integrates ICH (I/O Controller Hub) connectivity for IDE, floppy drive, and serial port interfaces, alongside hardware monitoring inputs for fan tachometer signals and PWM control outputs.
Technician FAQ
Q: What is the board number for this MSI motherboard?
A: The board number is MS-9596-100.
Q: What is the schematic revision and document number?
A: The schematic revision is C22, and the document number is B12.
Q: What controlled impedance values are specified for the PCB layers?
A: Layer 1 and Layer 8 are specified as 50 ohm controlled impedance traces.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
Technical Summary
This motherboard is identified by board number MS-9596-10A, with a schematic dated Thursday, April 22, 2004. The document includes ICH-based I/O connectivity, fan control circuitry, and standard legacy interface support. The design incorporates multiple fan headers with PWM control and tachometer feedback, utilizing N-channel MOSFETs and Schottky diodes for fan power switching and protection.
Technician FAQ
Q: What is the board number for this motherboard?
A: The board number is MS-9596-10A.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
Technical Summary
This MSI motherboard, identified by board number MS-9596-10A and PCB number PCB_MS-9596-10A, is documented under revision B12 with a document number of MH4. The schematic is dated Thursday, June 16, 2005. The board utilizes an ICH (I/O Controller Hub) for managing various I/O interfaces, including IDE and floppy drive connections. The design incorporates multiple fan headers (FAN1 through FAN8) with PWM control and tachometer feedback, utilizing components such as the D03-0443503-V02 P-MOS for fan power switching and N-channel MOSFETs like the 2N7002 for control. Power regulation includes 12V rails and various decoupling capacitors.
Technician FAQ
Q: What is the board number for this MSI motherboard?
A: The board number is MS-9596-10A, with a PCB number of PCB_MS-9596-10A.
Q: What is the document revision and date of this schematic?
A: The schematic is revision B12, dated Thursday, June 16, 2005.
Q: What type of fan control does this motherboard support?
A: The motherboard supports multiple fan headers (FAN1 through FAN8) with PWM control and tachometer feedback, using D03-0443503-V02 P-MOS transistors and 2N7002 N-channel MOSFETs.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
Technical Summary
This MSI motherboard, identified by board number MS-9596-10B, is based on an Intel ICH (I/O Controller Hub) platform, dated Thursday, October 27, 2005. The schematic details the ICH's connectivity to various legacy interfaces, including IDE, floppy drive, and parallel port signals, alongside fan control and monitoring circuitry. The design incorporates multiple fan headers (FAN1X through FAN5X) with PWM control and tachometer feedback, utilizing components such as the D03-0443503-V02 P-MOS driver and N-channel MOSFETs like the 2N7002 for fan power switching. The board also features a 12V power rail for fan and peripheral operation, with extensive filtering capacitors and Schottky diodes for protection.
Technician FAQ
Q: What is the board number for this MSI motherboard?
A: The board number is MS-9596-10B.
Q: What is the platform architecture of this motherboard?
A: The motherboard is based on an Intel ICH (I/O Controller Hub) platform.
Q: What type of fan control does this motherboard support?
A: The motherboard supports PWM-controlled fan headers (FAN1X through FAN5X) with tachometer feedback, using the D03-0443503-V02 P-MOS driver and 2N7002 MOSFETs.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
Technical Summary
This motherboard schematic, dated Tuesday, December 13, 2005, is identified by the board number MS-9596-10B. The document includes detailed fan control circuitry with multiple fan headers (FFAN1X, FFAN2X, FFAN3X, FFAN4X) and associated components such as P-MOS drivers (D03-0443503-V02) and Schottky diodes (1N5817AC). The schematic also features an 80-pin SCSI connector (FJ2Y) and a 140-pin NEC connector, indicating legacy storage and interface support. The board integrates ICH (I/O Controller Hub) signals for IDE, floppy drive, and fan control, with specific net names for hardware monitoring and PWM control.
Technician FAQ
Q: What is the board number for this motherboard?
A: The board number is MS-9596-10B.
Q: What type of fan control circuitry is present on this motherboard?
A: The schematic includes four fan headers (FFAN1X, FFAN2X, FFAN3X, FFAN4X) with P-MOS drivers (D03-0443503-V02) and Schottky diodes (1N5817AC) for fan power and control.
Q: What legacy interfaces are documented in this schematic?
A: The schematic includes an 80-pin SCSI connector (FJ2Y) and a 140-pin NEC connector, along with ICH signals for IDE and floppy drive control.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
Technical Summary
This MSI MS-9596 motherboard, revision 10E, is documented under schematic number MS-9596-10E with a PCB identifier of P05-959610E-T53. The schematic cover page is dated Monday, April 03, 2006. The platform integrates an ICH southbridge, as indicated by numerous ICH_PD signal references on the JD1 and JD2 connector pages. The design includes fan control headers with PWM and tachometer signals, legacy floppy drive interface signals, IDE interface signals, and serial port COM2 DCD signals. The board utilizes a 55-ohm PCB trace impedance specification. The JD1 connector is identified as N5C-40MA070-M06, and the JD2 connector is identified as N57-80F0121-A10. The schematic includes multiple mounting hole and test point references for board-level diagnostics.
Technician FAQ
Q: What is the board number and revision of this MSI motherboard?
A: The board number is MS-9596, revision 10E, with document number MS-9596-10E.
Q: What is the PCB identifier for this motherboard?
A: The PCB identifier is P05-959610E-T53.
Q: What southbridge is referenced in this schematic?
A: The ICH southbridge is referenced through multiple ICH_PD signal lines on the JD1 and JD2 connector pages.
Technical Specifications
Technical Summary
The MSI MS-9596 motherboard, revision VER: 20B, is documented under drawing number MS-9596-20 with a cover date of 2006/08/07. The schematic includes detailed fan power and connector pages, alongside JD1 and JD2 connector layouts. The board features multiple fan headers (FAN_F_1 through FAN_F_8) and hardware tachometer inputs (HW_TACH1 through HW_TACH8), along with PWM control signals (HM_PWM5, HM_PWM6). The JD1 connector is identified as N5C-40MA070-M06, and the JD2 connector is N57-80F0121-A10. The PCB includes a dedicated PCB part number P30-959620B-T53. The design incorporates IDE and floppy drive interface signals, including IDE_RSTDRV#, FD_INDX#, FD_HDSEL#, and FD_DIR#, routed through the ICH southbridge.
Technician FAQ
Q: What is the board number and revision of this motherboard?
A: The board number is MS-9596, revision VER: 20B, dated 2006/08/07.
Q: What are the connector part numbers for JD1 and JD2?
A: JD1 is N5C-40MA070-M06, and JD2 is N57-80F0121-A10.
Q: What PCB part number is associated with this motherboard?
A: The PCB part number is P30-959620B-T53.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
Technical Summary
The MS-9596 motherboard, documented under revision 30, is dated Thursday, April 26, 2007. The board number is MS-9596-30, which also serves as the PCB number. The schematic includes detailed fan power and connector pages, with extensive routing for IDE, SATA, USB, and fan control signals. The board features multiple fan headers with tachometer and PWM control lines, including FPWM_CPU, FPWM_MEM, and FPWM_PWR. RAID configuration selection is supported via RAID_SEL, and the board includes SGPIO interface lines for backplane management. The JD1 and JD2 connectors are specified as N5C-40MA070-M06 and N57-80F0121-A10 respectively, providing high-density I/O connectivity.
Technician FAQ
Q: What is the document number and revision of this motherboard?
A: The document number is MS-9596, revision 30.
Q: What is the PCB number for this board?
A: The PCB number is MS-9596-30.
Q: What fan control interfaces are available on this motherboard?
A: The board includes FPWM_CPU, FPWM_MEM, and FPWM_PWR PWM control lines, along with multiple fan tachometer inputs (FANTACH1 through FANTACH13) and fan power control signals (FAN_F1_N through FAN_F13_N).
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | MSI |
| Board Number | MS-9596-00 |
| Date | Tuesday, February 24, 2004 |
| Document Number | B1 |
| PCB Number | PCB_MS-9596-00 |
Technical Summary
This MSI motherboard, identified by board number MS-9596-00 and PCB number PCB_MS-9596-00, is documented under schematic sheet B1 with a date of Tuesday, February 24, 2004. The schematic details the ICH (I/O Controller Hub) connectivity, including IDE, floppy, and fan control interfaces. The fan control circuitry utilizes FDS4935 dual MOSFETs and N5817 Schottky diodes for power switching, with 2N7002 N-channel MOSFETs for signal-level control. The board features multiple fan headers (FAN1, FAN2, FAN3, FAN4) with PWM control signals (HM_PWM1 through HM_PWM8) and tachometer feedback (HW_TACH1 through HW_TACH8). Power delivery includes 12V and VCC rails with electrolytic capacitors rated at 470uF and 1000uF for bulk storage.
Technician FAQ
Q: What is the board number for this MSI motherboard?
A: The board number is MS-9596-00, with PCB number PCB_MS-9596-00.
Q: What fan control components are used on this motherboard?
A: The fan control circuitry uses FDS4935 dual N-channel MOSFETs, 2N7002 N-channel MOSFETs, and N5817 Schottky diodes.
Q: How many fan headers and PWM channels are documented?
A: The schematic documents four fan headers (FAN1, FAN2, FAN3, FAN4) with eight PWM control signals (HM_PWM1 through HM_PWM8) and eight tachometer feedback signals (HW_TACH1 through HW_TACH8).
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | MSI |
| Board Number | MS-9596-100 |
| Date | Thursday, April 08, 2004 |
| Document Number | B12 |
| Revision | C22 |
Technical Summary
This MSI motherboard, identified by board number MS-9596-100, is documented under schematic revision C22 with document number B12, dated Thursday, April 08, 2004. The schematic includes fan control circuitry featuring components such as the D03-0443503-V02 P-MOS transistor and 2N7002 N-channel MOSFETs for fan output management. The board layout specifies controlled impedance traces with Layer 1 and Layer 8 set to 50 ohms. The design integrates ICH (I/O Controller Hub) connectivity for IDE, floppy drive, and serial port interfaces, alongside hardware monitoring inputs for fan tachometer signals and PWM control outputs.
Technician FAQ
Q: What is the board number for this MSI motherboard?
A: The board number is MS-9596-100.
Q: What is the schematic revision and document number?
A: The schematic revision is C22, and the document number is B12.
Q: What controlled impedance values are specified for the PCB layers?
A: Layer 1 and Layer 8 are specified as 50 ohm controlled impedance traces.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Board Number | MS-9596-10A |
| Date | Thursday, April 22, 2004 |
Technical Summary
This motherboard is identified by board number MS-9596-10A, with a schematic dated Thursday, April 22, 2004. The document includes ICH-based I/O connectivity, fan control circuitry, and standard legacy interface support. The design incorporates multiple fan headers with PWM control and tachometer feedback, utilizing N-channel MOSFETs and Schottky diodes for fan power switching and protection.
Technician FAQ
Q: What is the board number for this motherboard?
A: The board number is MS-9596-10A.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | MSI |
| Board Number | MS-9596-10A |
| Revision | B12 |
| Date | Thursday, June 16, 2005 |
| PCB Number | PCB_MS-9596-10A |
| Document Number | MH4 |
Technical Summary
This MSI motherboard, identified by board number MS-9596-10A and PCB number PCB_MS-9596-10A, is documented under revision B12 with a document number of MH4. The schematic is dated Thursday, June 16, 2005. The board utilizes an ICH (I/O Controller Hub) for managing various I/O interfaces, including IDE and floppy drive connections. The design incorporates multiple fan headers (FAN1 through FAN8) with PWM control and tachometer feedback, utilizing components such as the D03-0443503-V02 P-MOS for fan power switching and N-channel MOSFETs like the 2N7002 for control. Power regulation includes 12V rails and various decoupling capacitors.
Technician FAQ
Q: What is the board number for this MSI motherboard?
A: The board number is MS-9596-10A, with a PCB number of PCB_MS-9596-10A.
Q: What is the document revision and date of this schematic?
A: The schematic is revision B12, dated Thursday, June 16, 2005.
Q: What type of fan control does this motherboard support?
A: The motherboard supports multiple fan headers (FAN1 through FAN8) with PWM control and tachometer feedback, using D03-0443503-V02 P-MOS transistors and 2N7002 N-channel MOSFETs.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | MSI |
| Board Number | MS-9596-10B |
| Date | Thursday, October 27, 2005 |
| CPU Platform | ICH (I/O Controller Hub) |
| PCH / Southbridge | ICH |
Technical Summary
This MSI motherboard, identified by board number MS-9596-10B, is based on an Intel ICH (I/O Controller Hub) platform, dated Thursday, October 27, 2005. The schematic details the ICH's connectivity to various legacy interfaces, including IDE, floppy drive, and parallel port signals, alongside fan control and monitoring circuitry. The design incorporates multiple fan headers (FAN1X through FAN5X) with PWM control and tachometer feedback, utilizing components such as the D03-0443503-V02 P-MOS driver and N-channel MOSFETs like the 2N7002 for fan power switching. The board also features a 12V power rail for fan and peripheral operation, with extensive filtering capacitors and Schottky diodes for protection.
Technician FAQ
Q: What is the board number for this MSI motherboard?
A: The board number is MS-9596-10B.
Q: What is the platform architecture of this motherboard?
A: The motherboard is based on an Intel ICH (I/O Controller Hub) platform.
Q: What type of fan control does this motherboard support?
A: The motherboard supports PWM-controlled fan headers (FAN1X through FAN5X) with tachometer feedback, using the D03-0443503-V02 P-MOS driver and 2N7002 MOSFETs.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Board Number | MS-9596-10B |
| Date | Tuesday, December 13, 2005 |
Technical Summary
This motherboard schematic, dated Tuesday, December 13, 2005, is identified by the board number MS-9596-10B. The document includes detailed fan control circuitry with multiple fan headers (FFAN1X, FFAN2X, FFAN3X, FFAN4X) and associated components such as P-MOS drivers (D03-0443503-V02) and Schottky diodes (1N5817AC). The schematic also features an 80-pin SCSI connector (FJ2Y) and a 140-pin NEC connector, indicating legacy storage and interface support. The board integrates ICH (I/O Controller Hub) signals for IDE, floppy drive, and fan control, with specific net names for hardware monitoring and PWM control.
Technician FAQ
Q: What is the board number for this motherboard?
A: The board number is MS-9596-10B.
Q: What type of fan control circuitry is present on this motherboard?
A: The schematic includes four fan headers (FFAN1X, FFAN2X, FFAN3X, FFAN4X) with P-MOS drivers (D03-0443503-V02) and Schottky diodes (1N5817AC) for fan power and control.
Q: What legacy interfaces are documented in this schematic?
A: The schematic includes an 80-pin SCSI connector (FJ2Y) and a 140-pin NEC connector, along with ICH signals for IDE and floppy drive control.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | MSI |
| Model | MS-9596 |
| Board Number | MS-9596 |
| Revision | 10E |
| Date | Monday, April 03, 2006 |
| Document Number | MS-9596-10E |
| PCB Number | P05-959610E-T53 |
Technical Summary
This MSI MS-9596 motherboard, revision 10E, is documented under schematic number MS-9596-10E with a PCB identifier of P05-959610E-T53. The schematic cover page is dated Monday, April 03, 2006. The platform integrates an ICH southbridge, as indicated by numerous ICH_PD signal references on the JD1 and JD2 connector pages. The design includes fan control headers with PWM and tachometer signals, legacy floppy drive interface signals, IDE interface signals, and serial port COM2 DCD signals. The board utilizes a 55-ohm PCB trace impedance specification. The JD1 connector is identified as N5C-40MA070-M06, and the JD2 connector is identified as N57-80F0121-A10. The schematic includes multiple mounting hole and test point references for board-level diagnostics.
Technician FAQ
Q: What is the board number and revision of this MSI motherboard?
A: The board number is MS-9596, revision 10E, with document number MS-9596-10E.
Q: What is the PCB identifier for this motherboard?
A: The PCB identifier is P05-959610E-T53.
Q: What southbridge is referenced in this schematic?
A: The ICH southbridge is referenced through multiple ICH_PD signal lines on the JD1 and JD2 connector pages.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | MSI |
| Model | MS-9596 |
| Board Number | MS-9596 |
| Revision | VER: 20B |
| Date | 2006/08/07 |
| Document Number | MS-9596-10 |
| Drawing Number | MS-9596-20 |
Technical Summary
The MSI MS-9596 motherboard, revision VER: 20B, is documented under drawing number MS-9596-20 with a cover date of 2006/08/07. The schematic includes detailed fan power and connector pages, alongside JD1 and JD2 connector layouts. The board features multiple fan headers (FAN_F_1 through FAN_F_8) and hardware tachometer inputs (HW_TACH1 through HW_TACH8), along with PWM control signals (HM_PWM5, HM_PWM6). The JD1 connector is identified as N5C-40MA070-M06, and the JD2 connector is N57-80F0121-A10. The PCB includes a dedicated PCB part number P30-959620B-T53. The design incorporates IDE and floppy drive interface signals, including IDE_RSTDRV#, FD_INDX#, FD_HDSEL#, and FD_DIR#, routed through the ICH southbridge.
Technician FAQ
Q: What is the board number and revision of this motherboard?
A: The board number is MS-9596, revision VER: 20B, dated 2006/08/07.
Q: What are the connector part numbers for JD1 and JD2?
A: JD1 is N5C-40MA070-M06, and JD2 is N57-80F0121-A10.
Q: What PCB part number is associated with this motherboard?
A: The PCB part number is P30-959620B-T53.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Document Number | MS-9596 |
| Revision | 30 |
| Date | Thursday, April 26, 2007 |
| Motherboard Manufacturer | MS-9596 |
| Board Number | MS-9596-30 |
| PCB Number | MS-9596-30 |
Technical Summary
The MS-9596 motherboard, documented under revision 30, is dated Thursday, April 26, 2007. The board number is MS-9596-30, which also serves as the PCB number. The schematic includes detailed fan power and connector pages, with extensive routing for IDE, SATA, USB, and fan control signals. The board features multiple fan headers with tachometer and PWM control lines, including FPWM_CPU, FPWM_MEM, and FPWM_PWR. RAID configuration selection is supported via RAID_SEL, and the board includes SGPIO interface lines for backplane management. The JD1 and JD2 connectors are specified as N5C-40MA070-M06 and N57-80F0121-A10 respectively, providing high-density I/O connectivity.
Technician FAQ
Q: What is the document number and revision of this motherboard?
A: The document number is MS-9596, revision 30.
Q: What is the PCB number for this board?
A: The PCB number is MS-9596-30.
Q: What fan control interfaces are available on this motherboard?
A: The board includes FPWM_CPU, FPWM_MEM, and FPWM_PWR PWM control lines, along with multiple fan tachometer inputs (FANTACH1 through FANTACH13) and fan power control signals (FAN_F1_N through FAN_F13_N).
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited by a moderator:
