toshiba inventec manaus 10md2_6050a2368301-mb-a02 schematic
inventec manaus 10md2_6050a2368301-mb-a02.pdf
Technical Specifications
Technical Summary
The Inventec Manaus 10M motherboard, revision A2, dated 2010.04.01, is built around the Penryn/Cantiga CPU platform paired with an ICH9-M southbridge. The system supports two DDR3 DIMM slots (DIMM0 and DIMM1) operating at 800/1066 MHz. Power management is handled by a combination of TPS51125, TPS51117, TPS51620RHAR, and APL5913 regulators, with a MAX17435ETG+ system charger IC. The embedded controller is a WINBOND KBC, and the BIOS is stored on a SPI EEROM. Audio is provided by a CX20671 codec, while networking and wireless are handled by ATHEROS controllers. A GMT_G686LT11U thermal sensor is present, and the clock generator is an ICS9LPRS365. The board also includes a card reader and a Conexant camera controller.
Technician FAQ
Q: What is the board number and revision of this motherboard?
A: The board number is X011310A23553-0-01, revision A2.
Q: What CPU platform and southbridge does this motherboard use?
A: It uses the Penryn/Cantiga CPU platform with an ICH9-M southbridge.
Q: What charging IC is used on this motherboard?
A: The charging IC is a MAX17435ETG+.
Q: What type of memory does this motherboard support?
A: It supports DDR3 memory across two DIMM slots (DIMM0 and DIMM1).
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
inventec manaus 10md2_6050a2368301-mb-a02.pdf
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | INVENTEC |
| Model | Manaus 10M |
| Motherboard Manufacturer | INVENTEC |
| Project Code | Manaus10M |
| Board Number | X011310A23553-0-01 |
| Revision | A2 |
| Date | 2010.04.01 |
| CPU Platform | Penryn / Cantiga |
| PCH / Southbridge | ICH9-M |
| EC / KBC | WINBOND |
| Audio Codec | CX20671 |
| BIOS / SPI Flash | SPI EEROM |
| Charging IC | MAX17435ETG+ |
| Charger Architecture | System Charger |
| Power IC(s) | TPS51125, TPS51117, TPS51620RHAR, APL5913 |
| RAM Type | DDR3 |
| RAM Architecture | DDR3 Interface |
| RAM Quantity / Slots | DDR3 DIMM0, DDR3 DIMM1 |
| LAN IC | ATHEROS |
| WiFi / WLAN IC | ATHEROS |
| Card Reader IC | CARDREADER |
| Clock Generator | ICS9LPRS365 |
| Thermal Sensor | GMT_G686LT11U |
| Document Number | X011310A23553-0-01 |
Technical Summary
The Inventec Manaus 10M motherboard, revision A2, dated 2010.04.01, is built around the Penryn/Cantiga CPU platform paired with an ICH9-M southbridge. The system supports two DDR3 DIMM slots (DIMM0 and DIMM1) operating at 800/1066 MHz. Power management is handled by a combination of TPS51125, TPS51117, TPS51620RHAR, and APL5913 regulators, with a MAX17435ETG+ system charger IC. The embedded controller is a WINBOND KBC, and the BIOS is stored on a SPI EEROM. Audio is provided by a CX20671 codec, while networking and wireless are handled by ATHEROS controllers. A GMT_G686LT11U thermal sensor is present, and the clock generator is an ICS9LPRS365. The board also includes a card reader and a Conexant camera controller.
Technician FAQ
Q: What is the board number and revision of this motherboard?
A: The board number is X011310A23553-0-01, revision A2.
Q: What CPU platform and southbridge does this motherboard use?
A: It uses the Penryn/Cantiga CPU platform with an ICH9-M southbridge.
Q: What charging IC is used on this motherboard?
A: The charging IC is a MAX17435ETG+.
Q: What type of memory does this motherboard support?
A: It supports DDR3 memory across two DIMM slots (DIMM0 and DIMM1).
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited:
