Schematic toshiba c600 inventec manaus 10m 6050a2355301 reva02 schematic

[Admin]

toshiba c600 inventec manaus 10m 6050a2355301_reva02 schematic

toshiba c600=1=inventec manaus 10m 6050a2355301_reva02.pdf

---

Technical Specifications

Parameter	Value
Brand	INVENTEC
Model	MAS10M
Motherboard Manufacturer	INVENTEC
Project Code	MAS10M
Board Number	6050A2355301-MB-A02
Revision	A02
Date	2010-03-16
Document Number	A23553-0-0
CPU Platform	Penryn
PCH / Southbridge	ICH9-M
GPU Type	Cantiga
Graphics Architecture	Cantiga
EC / KBC	WINBOND
Audio Codec	CX20671
BIOS / SPI Flash	WINBOND SPI EEROM
Charging IC	MAX_MAX17435ETG+_TQFN_24
Charger Architecture	System Charger &
Power IC(s)	TPS51117, TPS51125, TPS51620, APL5913, G2997, PC6014, PC6014A, M4825, PAM4825
RAM Type	DDR3
RAM Architecture	DDR3 Interface
RAM Quantity / Slots	2
LAN IC	AR8152
WiFi / WLAN IC	ATHEROS
Card Reader IC	NPCE781LA0DX
USB Hub IC	ICS9LPRS365
Thermal Sensor	FAN & THERMAL CONTROLLER

Technical Summary

The INVENTEC MAS10M motherboard, board number 6050A2355301-MB-A02 revision A02 dated 2010-03-16, is built around the Penryn CPU platform paired with the ICH9-M southbridge and integrated Cantiga graphics architecture. System memory consists of two DDR3 SO-DIMM slots operating at 800 MHz or 1066 MHz. The embedded controller is a WINBOND device, and the BIOS is stored on a WINBOND SPI EEROM. Audio is handled by a CX20671 codec, while networking includes an AR8152 LAN controller and an ATHEROS WLAN module. The charging subsystem is managed by a MAX_MAX17435ETG+ in a TQFN-24 package, with power regulation provided by TPS51117, TPS51125, TPS51620, APL5913, G2997, PC6014, PC6014A, M4825, and PAM4825 ICs. Additional integrated controllers include an NPCE781LA0DX card reader, an ICS9LPRS365 USB hub/clock generator, and a dedicated fan and thermal controller.

Technician FAQ

Q: What is the board number and revision of this motherboard?

A: The board number is 6050A2355301-MB-A02, revision A02.

Q: What BIOS IC is used on this motherboard?

A: The BIOS is stored on a WINBOND SPI EEROM.

Q: What EC/KBC is used on this motherboard?

A: The embedded controller is a WINBOND device.

Q: What charging IC is used on this motherboard?

A: The charging IC is a MAX_MAX17435ETG+ in a TQFN-24 package.

Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.

Indexed motherboard components

Open a component to see every indexed schematic that uses the same part.

MAS10M Project Code 6050A2355301-MB-A02 Board Number Penryn CPU Platform ICH9-M PCH / Southbridge Cantiga Graphics Cantiga Graphics CX20671 Audio Codec MAX_MAX17435ETG+_TQFN_24 Charging / PD IC APL5913 Power IC G2997 Power IC M4825 Power IC PAM4825 Power IC PC6014 Power IC PC6014A Power IC TPS51117 Power IC TPS51125 Power IC TPS51620 Power IC DDR3 RAM Type AR8152 LAN Controller ATHEROS WiFi / WLAN NPCE781LA0DX Card Reader IC ICS9LPRS365 USB Controller