toshiba israa ls-3401p fb rev-0.2 092 1
Technical Specifications
Technical Summary
This Compal LS-3401P revision 0.1 document, dated Friday, September 22, 2006, details a Fingerprint / B sub-board with PCB name IAKAADA600004800. The board integrates a TCS3CD_BGA48 fingerprint sensor and a TCD42B_BGA121 fingerprint controller. A jumper, JP1, is normally open and is closed to force a download mode. The design includes specific layout guidelines for the FFC hot bar and ESD diode traces.
Technician FAQ
Q: What is the document number and revision for this Compal fingerprint board?
A: The document number is LS-3401P, revision 0.1.
Q: What fingerprint sensor and controller are used on this board?
A: The fingerprint sensor is a TCS3CD_BGA48, and the fingerprint controller is a TCD42B_BGA121.
Q: What is the purpose of jumper JP1 on this board?
A: JP1 is normally open and is closed to force a download mode.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Compal |
| Motherboard Manufacturer | Compal |
| Document Number | LS-3401P |
| Revision | 0.1 |
| Date | Friday, September 22, 2006 |
| PCB Name | IAKAADA600004800 |
| Model Name | Fingerprint / B |
| Fingerprint Sensor | TCS3CD_BGA48 |
| Fingerprint Controller | TCD42B_BGA121 |
Technical Summary
This Compal LS-3401P revision 0.1 document, dated Friday, September 22, 2006, details a Fingerprint / B sub-board with PCB name IAKAADA600004800. The board integrates a TCS3CD_BGA48 fingerprint sensor and a TCD42B_BGA121 fingerprint controller. A jumper, JP1, is normally open and is closed to force a download mode. The design includes specific layout guidelines for the FFC hot bar and ESD diode traces.
Technician FAQ
Q: What is the document number and revision for this Compal fingerprint board?
A: The document number is LS-3401P, revision 0.1.
Q: What fingerprint sensor and controller are used on this board?
A: The fingerprint sensor is a TCS3CD_BGA48, and the fingerprint controller is a TCD42B_BGA121.
Q: What is the purpose of jumper JP1 on this board?
A: JP1 is normally open and is closed to force a download mode.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited:
