toshiba l301 quanta te1-touch pad board rev-2a 1
Technical Specifications
Technical Summary
This Quanta Computer Inc. TouchPad Board, project code TE1, board number 2A11, revision B2A, dated December 5, 2007, is a dedicated touchpad and fingerprint reader interface board. The design includes multiple switch configurations for both with-fingerprint (WFP) and without-fingerprint (WOFP) variants, utilizing switches such as SW-SKQGABE010-4P and SW-TJG-533-V-4P. The board features ESD protection components and supports USB trace routing for fingerprint module connectivity. Connector options include ACES and SCY sources for the touchpad module interface, with specific co-layout provisions for CN1/CN6 and CN3/CN7. The low-cost variant omits the fingerprint connector CN2, D1, C1, C2, L1, and resistor R2, which controls the touchpad LED.
Technician FAQ
Q: What is the board number and revision of this Quanta TouchPad Board?
A: The board number is 2A11, revision B2A.
Q: What are the switch part numbers used for the touchpad buttons?
A: The switches used are SW-SKQGABE010-4P and SW-TJG-533-V-4P, with specific variants for with-fingerprint (WFP) and without-fingerprint (WOFP) configurations.
Q: What connector options are available for the touchpad module interface?
A: The touchpad module connector has two source options: ACES (CN1/CN3) and SCY (CN6/CN7), with co-layout provisions for both.
Q: What components are omitted in the low-cost variant of this board?
A: The low-cost variant does not mount CN2, D1, C1, C2, L1, and R2.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Quanta Computer Inc. |
| Model | TE1 |
| Motherboard Manufacturer | Quanta Computer Inc. |
| Project Code | TouchPad Board |
| Board Number | 2A11 |
| Revision | B2A |
| Date | Wednesday, December 05, 2007 |
| Document Number | A3738 |
Technical Summary
This Quanta Computer Inc. TouchPad Board, project code TE1, board number 2A11, revision B2A, dated December 5, 2007, is a dedicated touchpad and fingerprint reader interface board. The design includes multiple switch configurations for both with-fingerprint (WFP) and without-fingerprint (WOFP) variants, utilizing switches such as SW-SKQGABE010-4P and SW-TJG-533-V-4P. The board features ESD protection components and supports USB trace routing for fingerprint module connectivity. Connector options include ACES and SCY sources for the touchpad module interface, with specific co-layout provisions for CN1/CN6 and CN3/CN7. The low-cost variant omits the fingerprint connector CN2, D1, C1, C2, L1, and resistor R2, which controls the touchpad LED.
Technician FAQ
Q: What is the board number and revision of this Quanta TouchPad Board?
A: The board number is 2A11, revision B2A.
Q: What are the switch part numbers used for the touchpad buttons?
A: The switches used are SW-SKQGABE010-4P and SW-TJG-533-V-4P, with specific variants for with-fingerprint (WFP) and without-fingerprint (WOFP) configurations.
Q: What connector options are available for the touchpad module interface?
A: The touchpad module connector has two source options: ACES (CN1/CN3) and SCY (CN6/CN7), with co-layout provisions for both.
Q: What components are omitted in the low-cost variant of this board?
A: The low-cost variant does not mount CN2, D1, C1, C2, L1, and R2.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited:
