toshiba miami 10g 6050a2116601 textmark rev 2007.05.18
Technical Specifications
Technical Summary
The INVENTEC Miami 10G motherboard, documented under board number CSA3691 and revision A03, is built around the Intel Merom CPU platform with an ATI-M72-M discrete GPU. The system uses an ICH8-M southbridge and supports DDR2 memory via two SODIMM slots (DDR2_SODIMM0 and DDR2_SODIMM1) operating at 533/667 MHz. The embedded controller is a Winbond W8769L, and the audio codec is an ALC268. The BIOS is stored on a SPI EEROM flash device. Power management and charging are handled by a TI BQ24721 charger IC in a QFN-32 package. Networking is provided by a Marvell 88E8055/39 LAN controller, and wireless connectivity uses a Marvell WLAN module. The system includes a TI PCI8412 cardbus controller and a GMT G680LT1 thermal sensor in a SOT23-5 package. The document number is 1310A21116A03, dated 17-May-2007.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is a Winbond W8769L.
Q: What charging IC is used on this motherboard?
A: The charging IC is a TI BQ24721 in a QFN-32 package.
Q: What LAN controller is used on this motherboard?
A: The LAN controller is a Marvell 88E8055/39.
Q: What audio codec is used on this motherboard?
A: The audio codec is an ALC268.
Q: What thermal sensor is used on this motherboard?
A: The thermal sensor is a GMT G680LT1 in a SOT23-5 package.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | INVENTEC |
| Model | Miami 10G |
| Project Code | Miami10G |
| Board Number | CSA3691 |
| Revision | A03 |
| Date | 17-May-2007 |
| Document Number | 1310A21116A03 |
| CPU Platform | Merom |
| GPU Type | ATI-M72-M |
| EC / KBC | W8769L |
| Audio Codec | ALC268 |
| BIOS / SPI Flash | SPI EEROM |
| Charging IC | TI_BQ24721_QFN_32 |
| LAN IC | 88E8055/39 |
| WiFi / WLAN IC | MARVELL |
| Card Reader IC | TI PCI8412 |
| RAM Type | DDR2 |
| RAM Architecture | DDR2_SODIMM0, DDR2_SODIMM1 |
| RAM Quantity / Slots | 2 |
| Thermal Sensor | GMT_G680LT1_SOT23_5 |
Technical Summary
The INVENTEC Miami 10G motherboard, documented under board number CSA3691 and revision A03, is built around the Intel Merom CPU platform with an ATI-M72-M discrete GPU. The system uses an ICH8-M southbridge and supports DDR2 memory via two SODIMM slots (DDR2_SODIMM0 and DDR2_SODIMM1) operating at 533/667 MHz. The embedded controller is a Winbond W8769L, and the audio codec is an ALC268. The BIOS is stored on a SPI EEROM flash device. Power management and charging are handled by a TI BQ24721 charger IC in a QFN-32 package. Networking is provided by a Marvell 88E8055/39 LAN controller, and wireless connectivity uses a Marvell WLAN module. The system includes a TI PCI8412 cardbus controller and a GMT G680LT1 thermal sensor in a SOT23-5 package. The document number is 1310A21116A03, dated 17-May-2007.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is a Winbond W8769L.
Q: What charging IC is used on this motherboard?
A: The charging IC is a TI BQ24721 in a QFN-32 package.
Q: What LAN controller is used on this motherboard?
A: The LAN controller is a Marvell 88E8055/39.
Q: What audio codec is used on this motherboard?
A: The audio codec is an ALC268.
Q: What thermal sensor is used on this motherboard?
A: The thermal sensor is a GMT G680LT1 in a SOT23-5 package.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Indexed motherboard components
Open a component to see every indexed schematic that uses the same part.
Indexed motherboard components
Open a component to see every indexed schematic that uses the same part.
Attachments
Last edited by a moderator:
