toshiba satellite quanta te1-touch pad board rev-2a 1205 1
Technical Specifications
Technical Summary
This Quanta Computer Inc. TouchPad Board, project TE1, carries board number 2A11 and document number A3738, revision B2A, dated December 5, 2007. The board supports mainstream and low-cost configurations, with fingerprint reader (WFP) and without fingerprint reader (WOFP) variants. Key components include SW1, SW4, SW5, SW8, SW9, and SW12 for WFP configurations, and SW2, SW3, SW6, SW7, SW10, and SW11 for WOFP configurations. Connectors include CN1 (ACES_88501-0601-6P-L), CN2 (ACES_88266-04001-06), CN3 (ACES_88501-1201-TE1-G), CN6 (SCY_BL121-06R-6P-L-BL5), and CN7 (SCY_BL121-12R-12P-L-BL5). ESD protection diodes D2 and D3 (BZ5V6) are used. The board includes mounting holes HOLE1 through HOLE6 with specific drill sizes.
Technician FAQ
Q: What is the board number and revision of this TouchPad Board?
A: The board number is 2A11, revision B2A.
Q: What are the key connector differences between WFP and WOFP configurations?
A: For WFP configurations, CN4 and CN5 are mounted; for WOFP configurations, they are not mounted. CN1 and CN6 are co-lay options, as are CN3 and CN7.
Q: What ESD protection components are used on this board?
A: D2 and D3 are BZ5V6 ESD protection diodes.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Quanta Computer Inc. |
| Model | TE1 |
| Project | TouchPad Board |
| Board Number | 2A11 |
| Revision | B2A |
| Date | Wednesday, December 05, 2007 |
| Document Number | A3738 |
Technical Summary
This Quanta Computer Inc. TouchPad Board, project TE1, carries board number 2A11 and document number A3738, revision B2A, dated December 5, 2007. The board supports mainstream and low-cost configurations, with fingerprint reader (WFP) and without fingerprint reader (WOFP) variants. Key components include SW1, SW4, SW5, SW8, SW9, and SW12 for WFP configurations, and SW2, SW3, SW6, SW7, SW10, and SW11 for WOFP configurations. Connectors include CN1 (ACES_88501-0601-6P-L), CN2 (ACES_88266-04001-06), CN3 (ACES_88501-1201-TE1-G), CN6 (SCY_BL121-06R-6P-L-BL5), and CN7 (SCY_BL121-12R-12P-L-BL5). ESD protection diodes D2 and D3 (BZ5V6) are used. The board includes mounting holes HOLE1 through HOLE6 with specific drill sizes.
Technician FAQ
Q: What is the board number and revision of this TouchPad Board?
A: The board number is 2A11, revision B2A.
Q: What are the key connector differences between WFP and WOFP configurations?
A: For WFP configurations, CN4 and CN5 are mounted; for WOFP configurations, they are not mounted. CN1 and CN6 are co-lay options, as are CN3 and CN7.
Q: What ESD protection components are used on this board?
A: D2 and D3 are BZ5V6 ESD protection diodes.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited:
