dell latitude 13 lt13tl x gerber 6050a2307401-mb rev a02-03b 2009.12.11
Technical Specifications
Technical Summary
This DELL LT13TL motherboard, manufactured by INVENTEC under board number CSA3511 revision A02, is built around the Intel Penryn SFF ULV CPU platform paired with the ICH9M SFF southbridge. Graphics are handled by the integrated Cantiga SFF GPU. The system memory architecture consists of DDR3 1.5V operating at 800/1066 MHz via a single SODIMM0 slot. The embedded controller is an SMSC MEC5035, and the audio codec is a Realtek ALC269Q. The BIOS is stored on a SPI flash device. Power management is handled by a multi-IC solution including TPS51125, TPS51610, TPS51218, TPS51100, SI7326DN, and RT9043, with charging controlled by an ECE5028. Networking is provided by a Broadcom BCM5761E or BCM5756M LAN IC, and wireless connectivity is supported by a Broadcom WLAN module. The system also features an IDT ICS9LPRS3165AKLF HDMI level shifter and a Realtek RTS5159 card reader controller.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is an SMSC MEC5035.
Q: What is the memory architecture for this motherboard?
A: The system uses DDR3 1.5V memory operating at 800/1066 MHz, installed in a single SODIMM0 slot.
Q: What LAN IC is used on this motherboard?
A: The LAN controller is a Broadcom BCM5761E or BCM5756M.
Q: What audio codec is used on this motherboard?
A: The audio codec is a Realtek ALC269Q.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | DELL |
| Model | LT13TL |
| Motherboard Manufacturer | INVENTEC |
| Board Number | CSA3511 |
| Revision | A02 |
| Date | 11-Dec-2009 |
| CPU Platform | Penryn SFF ULV |
| PCH / Southbridge | ICH9M SFF |
| GPU Type | Cantiga SFF |
| EC / KBC | MEC5035 |
| Audio Codec | REA ALC269Q |
| BIOS / SPI Flash | SPI 956pin |
| Charging IC | ECE5028 |
| Power IC(s) | TPS51125, TPS51610, TPS51218, TPS51100, SI7326DN, RT9043 |
| RAM Type | DDR3 |
| RAM Architecture | DDR3 1.5V 800/1066 MHz |
| RAM Quantity / Slots | SODIMM0 |
| Card Reader IC | RTS5159 |
| LAN IC | BCM5761E / BCM5756M |
| WiFi / WLAN IC | Broadcom |
| HDMI Level Shifter | IDT ICS9LPRS3165AKLF |
Technical Summary
This DELL LT13TL motherboard, manufactured by INVENTEC under board number CSA3511 revision A02, is built around the Intel Penryn SFF ULV CPU platform paired with the ICH9M SFF southbridge. Graphics are handled by the integrated Cantiga SFF GPU. The system memory architecture consists of DDR3 1.5V operating at 800/1066 MHz via a single SODIMM0 slot. The embedded controller is an SMSC MEC5035, and the audio codec is a Realtek ALC269Q. The BIOS is stored on a SPI flash device. Power management is handled by a multi-IC solution including TPS51125, TPS51610, TPS51218, TPS51100, SI7326DN, and RT9043, with charging controlled by an ECE5028. Networking is provided by a Broadcom BCM5761E or BCM5756M LAN IC, and wireless connectivity is supported by a Broadcom WLAN module. The system also features an IDT ICS9LPRS3165AKLF HDMI level shifter and a Realtek RTS5159 card reader controller.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is an SMSC MEC5035.
Q: What is the memory architecture for this motherboard?
A: The system uses DDR3 1.5V memory operating at 800/1066 MHz, installed in a single SODIMM0 slot.
Q: What LAN IC is used on this motherboard?
A: The LAN controller is a Broadcom BCM5761E or BCM5756M.
Q: What audio codec is used on this motherboard?
A: The audio codec is a Realtek ALC269Q.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited:
