File Request Elitebook 840 g8 i5 gen 11

[Heyplay999]

Okay i will try

 

[Vahab Hemmati]

good luck

 

[Heyplay999]

Hello my friends when update the bios after flash it i get solid led charge and no boot nothings happened i tried to update the bios because nvme m.2 cant show in bios after this problem i tried to reflash the bios with original dumps it worked fine what is the problem. Note: i download the bios update depending on the serial number of the laptop please help.

 

[Redhat]

Hello my friends when update the bios after flash it i get solid led charge and no boot nothings happened i tried to update the bios because nvme m.2 cant show in bios after this problem i tried to reflash the bios with original dumps it worked fine what is the problem. Note: i download the bios update depending on the serial number of the laptop please help.

send me full laptop model and serial no

 

[Heyplay999]

Hp elitebook 840 g8 s/n:5cg2374434

 

[Vahab Hemmati]

Hp elitebook 840 g8 s/n:5cg2374434

latest update files for elitebook 840 g8 :

 

[Heyplay999]

What does tge problem?

 

[Vahab Hemmati]

What does tge problem?

please program update files
i hope it will solve the problem

 

[Redhat]

What does tge problem?

latest update files for elitebook 840 g8 :

Take a full backup of both the BIOS and EC chips first.

Then program both chips (BIOS and EC) with the latest files that were provided.

After programming the BIOS, DO NOT power on the laptop.
Make sure both chips are fully programmed before turning the system on.

After powering on, wait at least 3–4 minutes.
During the first boot, the system may restart several times or shut down and power on automatically.
Be patient and allow the programming/initialization process to complete.

Most likely, after this process, the BIOS password issue and the other problems you mentioned will be resolved, unless there is another underlying hardware issue.

Overall, these files are your last chance if the problem is firmware-related.

 

[Heyplay999]

Okay thanks a lot guys i will try

 

[Heyplay999]

Take a full backup of both the BIOS and EC chips first.

Then program both chips (BIOS and EC) with the latest files that were provided.

After programming the BIOS, DO NOT power on the laptop.
Make sure both chips are fully programmed before turning the system on.

After powering on, wait at least 3–4 minutes.
During the first boot, the system may restart several times or shut down and power on automatically.
Be patient and allow the programming/initialization process to complete.

Most likely, after this process, the BIOS password issue and the other problems you mentioned will be resolved, unless there is another underlying hardware issue.

Overall, these files are your last chance if the problem is firmware-related.

M.2 is worked before unlock the bios.

 

[Vahab Hemmati]

OK
good luck