ibm x200 x200e wistron mp1 mocha1 lmc slice 07585-1 final schematic 1
Technical Specifications
Technical Summary
This Wistron Corporation Media Slice IO Board, project code 91.47Q01.001 and board number 07585-1, is documented under drawing number A3117 dated Monday, May 05, 2008. The board integrates a SMSC USB2514 USB hub IC for USB port expansion, alongside TPS2065 and TPS2066 USB power switches for overcurrent protection on respective USB ports. The design includes a docking connector, Ultrabay connector, DisplayPort interface, CRT connector, RJ45 LAN connector, and SATA interface. The PCB stackup is defined as 1.2mm thickness with layers TOP, VCC, GND, and BOTTOM. The schematic details signal routing for USB, SATA, DisplayPort, audio, and docking power management.
Technician FAQ
Q: What USB hub IC is used on this board?
A: The board uses a SMSC USB2514 USB hub IC.
Q: What USB power switches are used on this board?
A: The board uses TPS2065 and TPS2066 USB power switches.
Q: What is the board number and project code for this Wistron board?
A: The board number is 07585-1 and the project code is 91.47Q01.001.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Wistron Corporation |
| Motherboard Manufacturer | Wistron Corporation |
| Project Code | 91.47Q01.001 |
| Board Number | 07585-1 |
| Date | Monday, May 05, 2008 |
| Document Number | A3117 |
| USB Hub IC | USB2514 |
| USB PWR Switch | TPS2065 |
| USB PWR Switch 2 | TPS2066 |
Technical Summary
This Wistron Corporation Media Slice IO Board, project code 91.47Q01.001 and board number 07585-1, is documented under drawing number A3117 dated Monday, May 05, 2008. The board integrates a SMSC USB2514 USB hub IC for USB port expansion, alongside TPS2065 and TPS2066 USB power switches for overcurrent protection on respective USB ports. The design includes a docking connector, Ultrabay connector, DisplayPort interface, CRT connector, RJ45 LAN connector, and SATA interface. The PCB stackup is defined as 1.2mm thickness with layers TOP, VCC, GND, and BOTTOM. The schematic details signal routing for USB, SATA, DisplayPort, audio, and docking power management.
Technician FAQ
Q: What USB hub IC is used on this board?
A: The board uses a SMSC USB2514 USB hub IC.
Q: What USB power switches are used on this board?
A: The board uses TPS2065 and TPS2066 USB power switches.
Q: What is the board number and project code for this Wistron board?
A: The board number is 07585-1 and the project code is 91.47Q01.001.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited:
