Schematic ibm x200 x200e wistron mp1 mocha1 mb 07226-2 final rev 1.0 schematic schematic

[Admin]

ibm x200 x200e wistron mp1 mocha1 mb 07226-2 final rev 1.0 schematic 1

---

Technical Specifications

Parameter	Value
Brand	Wistron Corporation
Project Code	91.47Q01.001
Board Number	48.47Q01.001
Document Number	A3162
Date	Tuesday, September 09, 2008
CPU Platform	Intel Penryn SV
PCH / Southbridge	Intel ICH9-M
GPU Type	Intel Cantiga-GM
Graphics Architecture	LVDS INTEGRATED GRAHPICS
EC / KBC	H8S/2116BG20VKBC
Audio Codec	ALC262
BIOS / SPI Flash	SPI-FLASH
Charging IC	ADP3808
Charger Architecture	Battery Charger/Selector
Power IC(s)	TPS51221, VT1311, BD3550, MAX1510, VT351A
RAM Type	DDR3
RAM Architecture	UNBUFFERED DDR3 SODIMM
RAM Quantity / Slots	2
Thermal Sensor	MAX6694, LM26
Card Reader IC	R5C811
USB Hub IC	USB2514
LAN IC	BOAZMAN
WiFi / WLAN IC	WPCN385
HDMI Level Shifter	PI3L500AZFEX

Technical Summary

The Wistron Mocha-1-2 motherboard, documented under project code 91.47Q01.001 and board number 48.47Q01.001, is built around the Intel Penryn SV processor platform paired with the Intel Cantiga-GM integrated graphics and an Intel ICH9-M southbridge. The system memory architecture consists of two slots for unbuffered DDR3 SODIMM modules. The embedded controller is a Renesas H8S/2116BG20VKBC, and the audio subsystem is handled by a Realtek ALC262 codec. Power management is provided by a combination of ICs including the TPS51221, VT1311, BD3550, MAX1510, and VT351A, with battery charging managed by an ADP3808 charger/selector. The board features a SPI-FLASH for BIOS storage, a USB2514 USB hub controller, a BOAZMAN LAN controller, a WPCN385 WLAN module, and an R5C811 card reader. Thermal monitoring is handled by MAX6694 and LM26 sensors, and the HDMI interface uses a PI3L500AZFEX level shifter.

Technician FAQ

Q: What EC/KBC is used on this motherboard?

A: The embedded controller is a Renesas H8S/2116BG20VKBC.

Q: What is the BIOS storage type on this motherboard?

A: The BIOS is stored on a SPI-FLASH device.

Q: What is the charging architecture of this motherboard?

A: The charging architecture uses an ADP3808 battery charger/selector.

Q: What memory type and configuration does this motherboard support?

A: The motherboard supports unbuffered DDR3 SODIMM modules across two slots.

Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.

Indexed motherboard components

Open a component to see every indexed schematic that uses the same part.

91.47Q01.001 Project Code 48.47Q01.001 Board Number Penryn CPU Platform ICH9 PCH / Southbridge Intel Cantiga-GM Graphics LVDS INTEGRATED GRAHPICS Graphics H8S/2116BG20VKBC EC / KBC ALC262 Audio Codec ADP3808 Charging / PD IC BD3550 Power IC MAX1510 Power IC TPS51221 Power IC VT1311 Power IC VT351A Power IC DDR3 RAM Type MAX6694, LM26 Thermal / Fan Control R5C811 Card Reader IC USB2514 USB Controller WPCN385 WiFi / WLAN PI3L500AZFEX Signal Conditioning IC