Salim Badakhshan
Registered
MSI MS-9573 5U Rev X03 0A 120 140 Schematic
Technical Specifications
Technical Summary
This Dell Computer Corporation schematic, dated 2/23/2004, documents the PCI Express Hot Plug circuitry for the PE2800 project, board number SVF13142, drawing number X03-4433, revision 0.32. The hot plug controller is a MIC2591 in an SO-8 package, managing power delivery to the PCI Express slot. The design utilizes SI4420DY N-channel and SI4435DY P-channel MOSFETs, both in SO-8 packages, for power switching. The schematic includes detailed engineering notes on current limit settings, fault timing, and component value changes across multiple revision dates, including adjustments for the MIC2591A variant.
Technician FAQ
Q: What is the hot plug controller IC used on this Dell PE2800 motherboard?
A: The hot plug controller is a MIC2591 in an SO-8 package.
Q: What MOSFETs are used for the PCI Express hot plug power switching?
A: The design uses SI4420DY N-channel MOSFETs and SI4435DY P-channel MOSFETs, both in SO-8 packages.
Q: What is the board number and project code for this schematic?
A: The board number is SVF13142, and the project code is PE2800.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
Technical Summary
This Dell Computer Corporation schematic, drawing number F1314 revision X03 dated 1/30/2004, documents a 5U Riser board designed around the Dobson (NQ80332) CPU platform with a PXH (NQ80000PXH-D, NQ80001) southbridge. The board supports DDR2 400 memory across four DIMM slots and features dual-channel SCSI A and SCSI B interfaces using LSI 1030 controllers operating at U320 speeds. Expansion includes PCI Express x8 and x4 slots, PCI-X 1.0 at 133 MHz, and legacy 32-bit/33 MHz 5V PCI slots with hot plug capability. The board incorporates Dobson Flash NVRAM, a CPLD for spare gates, I2C isolation with a dedicated address chart, and ROMB DIMM support. The riser connects to the planar via 202-pin gold fingers and includes comprehensive power, reset, clock, interrupt, and JTAG block diagrams.
Technician FAQ
Q: What is the drawing number and revision of this Dell riser board?
A: The drawing number is F1314, revision X03, dated 1/30/2004.
Q: What CPU platform and southbridge are used on this board?
A: The CPU platform is Dobson (NQ80332) and the southbridge is PXH (NQ80000PXH-D, NQ80001).
Q: What type of memory and how many slots are supported?
A: The board supports DDR2 400 memory across four DIMM slots.
Q: What SCSI controllers and interface speed are used?
A: Dual LSI 1030 controllers provide SCSI A and SCSI B interfaces at U320 speed.
Q: What expansion slot types are available?
A: The board includes PCI Express x8 and x4 slots, PCI-X 1.0 at 133 MHz slots, and legacy 32-bit/33 MHz 5V PCI slots with hot plug capability.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
Technical Summary
This Dell Corvette 5U Riser motherboard, project code Corvette 5U Riser, is based on the Dobson CPU platform with Lindenhurst and Tumwater southbridge components. The board revision is A04-00, dated 10/29/2004, with board numbers M8871, M8938, and F1314. Memory architecture uses DDR2 400 via a ROMB DDR2 DIMM interface. Graphics processing is handled by an IOP332, NQ80332 GPU, with a discrete LSI 1030, 62036A1 dGPU chip. The system incorporates a CPLD EC/KBC, which is programmable on pages 10 (U16), 14 (U14), and 36 (U31). Networking is provided by PXH and I6700 LAN ICs, with PXH-D for wireless. Storage connectivity includes LSI 1030 for card reader functions, and the charging architecture is managed by a ROMB Battery controller circuit. Power delivery uses DC2DCs, and thermal monitoring is handled by an intrusion/FRU/temperature sensor circuit.
Technician FAQ
Q: What is the EC/KBC on this motherboard and is it programmable?
A: The EC/KBC is a CPLD. It is programmable, with programming interfaces located on pages 10 (U16), 14 (U14), and 36 (U31).
Q: What memory architecture does this motherboard use?
A: This motherboard uses DDR2 400 memory via a ROMB DDR2 DIMM interface.
Q: What is the charging architecture on this motherboard?
A: The charging architecture is managed by a ROMB Battery controller circuit (ROMB BATT CNTRL CKT).
Q: What are the board numbers for this motherboard?
A: The board numbers are M8871, M8938, and F1314.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
Technical Summary
This Dell PowerEdge 2800 server schematic, document F1314 revision A06-00 dated 2/23/2005, details the Corvette 5U Riser project board number 167100. The platform is built around the Dobson CPU architecture with a Lindenhurst southbridge and features an ATI Rage XL graphics controller. Memory architecture consists of DDR2 400 with ROMB DDR2 DIMM support. The system utilizes a Tumwater EC/KBC with programmable devices located at U16 on page 10, U14 on page 14, and U31 on page 36. Storage is handled by dual LSI 1030 and LSI 1020 SCSI controllers with U320 SCSI interfaces. Networking is provided by a Broadcom BCM5704 LAN controller. The design incorporates a Xilinx CPLD with Dell part number W8714. Multiple PWA revisions are documented including M8938, M8871, T8384, GC
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Dell Computer Corporation |
| Motherboard Manufacturer | Dell Computer Corporation |
| Project Code | PE2800 |
| Board Number | SVF13142 |
| Revision | 0.32 |
| Date | 2/23/2004 |
| Drawing Number | X03-4433 |
| Document Title | PCI Express Hot Plug |
| Hot Plug Controller | MIC2591 |
| Hot Plug Controller Package | SO-8 |
| Hot Plug MOSFET (N-Channel) | SI4420DY |
| Hot Plug MOSFET (P-Channel) | SI4435DY |
| Hot Plug MOSFET Package | SO-8 |
Technical Summary
This Dell Computer Corporation schematic, dated 2/23/2004, documents the PCI Express Hot Plug circuitry for the PE2800 project, board number SVF13142, drawing number X03-4433, revision 0.32. The hot plug controller is a MIC2591 in an SO-8 package, managing power delivery to the PCI Express slot. The design utilizes SI4420DY N-channel and SI4435DY P-channel MOSFETs, both in SO-8 packages, for power switching. The schematic includes detailed engineering notes on current limit settings, fault timing, and component value changes across multiple revision dates, including adjustments for the MIC2591A variant.
Technician FAQ
Q: What is the hot plug controller IC used on this Dell PE2800 motherboard?
A: The hot plug controller is a MIC2591 in an SO-8 package.
Q: What MOSFETs are used for the PCI Express hot plug power switching?
A: The design uses SI4420DY N-channel MOSFETs and SI4435DY P-channel MOSFETs, both in SO-8 packages.
Q: What is the board number and project code for this schematic?
A: The board number is SVF13142, and the project code is PE2800.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Dell |
| Motherboard Manufacturer | Dell Computer Corporation |
| Drawing Number | F1314 |
| Revision | X03 |
| Date | 1/30/2004 |
| CPU Platform | Dobson (NQ80332) |
| PCH / Southbridge | PXH (NQ80000PXH-D, NQ80001) |
| RAM Type | DDR2 400 |
| RAM Architecture | DIMM |
| RAM Quantity / Slots | 4 |
| LAN IC | LSI 1030 |
| SCSI Controller | LSI 1030 |
| SCSI Architecture | U320 |
| PCI Express Configuration | x8, x4, x8 SLOT |
| PCI-X Configuration | PCIX 1.0 (133 MHz) |
| Legacy PCI Configuration | 32b/33M 5V |
| Hot Plug Support | PCI Express Hot Plug |
| ROMB Support | ROMB DIMM |
| Flash / NVRAM | Dobson Flash NVRAM |
| CPLD | CPLD, Spare Gates |
| I2C Isolation | I2C Isolation, I2C Block Diagram, I2C Address Chart |
| Form Factor | 5U Riser |
| Connector Type | 202 pin Gold Fingers |
| Board Number | F1314 |
| Document Number | F1314 |
Technical Summary
This Dell Computer Corporation schematic, drawing number F1314 revision X03 dated 1/30/2004, documents a 5U Riser board designed around the Dobson (NQ80332) CPU platform with a PXH (NQ80000PXH-D, NQ80001) southbridge. The board supports DDR2 400 memory across four DIMM slots and features dual-channel SCSI A and SCSI B interfaces using LSI 1030 controllers operating at U320 speeds. Expansion includes PCI Express x8 and x4 slots, PCI-X 1.0 at 133 MHz, and legacy 32-bit/33 MHz 5V PCI slots with hot plug capability. The board incorporates Dobson Flash NVRAM, a CPLD for spare gates, I2C isolation with a dedicated address chart, and ROMB DIMM support. The riser connects to the planar via 202-pin gold fingers and includes comprehensive power, reset, clock, interrupt, and JTAG block diagrams.
Technician FAQ
Q: What is the drawing number and revision of this Dell riser board?
A: The drawing number is F1314, revision X03, dated 1/30/2004.
Q: What CPU platform and southbridge are used on this board?
A: The CPU platform is Dobson (NQ80332) and the southbridge is PXH (NQ80000PXH-D, NQ80001).
Q: What type of memory and how many slots are supported?
A: The board supports DDR2 400 memory across four DIMM slots.
Q: What SCSI controllers and interface speed are used?
A: Dual LSI 1030 controllers provide SCSI A and SCSI B interfaces at U320 speed.
Q: What expansion slot types are available?
A: The board includes PCI Express x8 and x4 slots, PCI-X 1.0 at 133 MHz slots, and legacy 32-bit/33 MHz 5V PCI slots with hot plug capability.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Dell |
| Motherboard Manufacturer | Dell Computer Corporation |
| Project Code | Corvette 5U Riser |
| Board Number | M8871, M8938, F1314 |
| Revision | A04-00 |
| Date | 10/29/2004 |
| CPU Platform | Dobson |
| PCH / Southbridge | Lindenhurst, Tumwater |
| GPU Type | IOP332, NQ80332 |
| dGPU Chip Number | LSI 1030, 62036A1 |
| EC / KBC | CPLD |
| EC/KBC Programmable | Programmables on pages 10 (U16), 14 (U14), and 36 (U31) |
| RAM Type | DDR2 400 |
| RAM Architecture | ROMB DDR2 DIMM |
| LAN IC | PXH, I6700 |
| WiFi / WLAN IC | PXH-D |
| Card Reader IC | LSI 1030 |
| USB Hub IC | PXH |
| Charging IC | ROMB Battery |
| Charger Architecture | ROMB BATT CNTRL CKT |
| Power IC(s) | DC2DCs |
| Thermal Sensor | INTRUSION/FRU/TEMP SENSOR |
| Drawing Number | 167100, 166975, 171598 |
| Document Number | SCHEM,RSR,PE2800,SVF1214 |
Technical Summary
This Dell Corvette 5U Riser motherboard, project code Corvette 5U Riser, is based on the Dobson CPU platform with Lindenhurst and Tumwater southbridge components. The board revision is A04-00, dated 10/29/2004, with board numbers M8871, M8938, and F1314. Memory architecture uses DDR2 400 via a ROMB DDR2 DIMM interface. Graphics processing is handled by an IOP332, NQ80332 GPU, with a discrete LSI 1030, 62036A1 dGPU chip. The system incorporates a CPLD EC/KBC, which is programmable on pages 10 (U16), 14 (U14), and 36 (U31). Networking is provided by PXH and I6700 LAN ICs, with PXH-D for wireless. Storage connectivity includes LSI 1030 for card reader functions, and the charging architecture is managed by a ROMB Battery controller circuit. Power delivery uses DC2DCs, and thermal monitoring is handled by an intrusion/FRU/temperature sensor circuit.
Technician FAQ
Q: What is the EC/KBC on this motherboard and is it programmable?
A: The EC/KBC is a CPLD. It is programmable, with programming interfaces located on pages 10 (U16), 14 (U14), and 36 (U31).
Q: What memory architecture does this motherboard use?
A: This motherboard uses DDR2 400 memory via a ROMB DDR2 DIMM interface.
Q: What is the charging architecture on this motherboard?
A: The charging architecture is managed by a ROMB Battery controller circuit (ROMB BATT CNTRL CKT).
Q: What are the board numbers for this motherboard?
A: The board numbers are M8871, M8938, and F1314.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Dell |
| Model | PowerEdge 2800 |
| Motherboard Manufacturer | Dell Inc. |
| Project Code | Corvette 5U Riser |
| Board Number | 167100 |
| Revision | A06-00 |
| Date | 2/23/2005 |
| CPU Platform | Dobson |
| PCH / Southbridge | Lindenhurst |
| GPU Type | ATI Rage XL |
| EC / KBC | Tumwater |
| EC/KBC Programmable | Programmables on pages 10 (U16), 14 (U14), and 36 (U31) |
| BIOS / SPI Flash | Dobson Flash NVRAM |
| Charging IC | ROMB Battery |
| RAM Type | DDR2 400 |
| RAM Architecture | ROMB DDR2 DIMM |
| LAN IC | Broadcom BCM5704 |
| SCSI Controller | LSI 1030 |
| SCSI Controller | LSI 1020 |
| CPLD | Xilinx |
| CPLD Part Number | W8714 |
| PWA Board Number | M8938 |
| PWA Board Number | M8871 |
| PWA Board Number | T8384 |
| PWA Board Number | GC654 |
| PWA Board Number | DC876 |
| PWA Board Number | HC375 |
| PWB Number | 166975 |
| PWB Number | 171598 |
| PWB Number | 170371 |
| PWB Number | 171436 |
| PWB Number | 177371 |
| Document Number | F1314 |
| Drawing Number | ABC1234 |
| Schematic Number | F1314 |
| Assembly Drawing | 167100 |
| PWA Number | 166975 |
| PWA Number | 171598 |
| PWA Number | 170371 |
| PWA Number | 171436 |
| PWA Number | 177371 |
Technical Summary
This Dell PowerEdge 2800 server schematic, document F1314 revision A06-00 dated 2/23/2005, details the Corvette 5U Riser project board number 167100. The platform is built around the Dobson CPU architecture with a Lindenhurst southbridge and features an ATI Rage XL graphics controller. Memory architecture consists of DDR2 400 with ROMB DDR2 DIMM support. The system utilizes a Tumwater EC/KBC with programmable devices located at U16 on page 10, U14 on page 14, and U31 on page 36. Storage is handled by dual LSI 1030 and LSI 1020 SCSI controllers with U320 SCSI interfaces. Networking is provided by a Broadcom BCM5704 LAN controller. The design incorporates a Xilinx CPLD with Dell part number W8714. Multiple PWA revisions are documented including M8938, M8871, T8384, GC
Attachments
Last edited by a moderator:
