Salim Badakhshan
Registered
Tongfang PF4NR1F AMD BID FP6 VA 20200812 Schematic
Technical Specifications
Technical Summary
This document, APF4NR1F_FG_DBA22, dated Friday, August 14, 2020, details a fingerprint sensor sub-board. The core component is the EM85F696AP fingerprint IC, which interfaces via a cnfp1 FFC connector (CON_FFC_6R05-AFC34-S06FCA_HFS2S1, 6-pin, 0.5mm pitch). The circuit includes a Y1FSX3M-16M1324 crystal oscillator for timing. Protection is provided by multiple AZ5A23-01FE TVS diodes in an ESD0201_0D65X0D35_0D3421 package and a single FSA614RAU217 ESD protection IC in an ESD_3NC_318 package. The board operates on +3.3VS_F and VDD15 power rails.
Technician FAQ
Q: What is the fingerprint sensor IC used on this board?
A: The fingerprint sensor IC is the EM85F696AP.
Q: What type of connector is used for the fingerprint sensor?
A: The connector is cnfp1, an FFC type with 6 pins, 0.5mm pitch, model CON_FFC_6R05-AFC34-S06FCA_HFS2S1.
Q: What protection components are used on this fingerprint board?
A: The board uses AZ5A23-01FE TVS diodes in an ESD0201_0D65X0D35_0D3421 package and one FSA614RAU217 ESD protection IC.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
Technical Summary
This document, BPF4NR1F_FG_DBA312, dated Wednesday, September 02, 2020, details a fingerprint reader sub-board. The core component is the EM85F696A fingerprint sensor IC, which interfaces via a CON_FFC_6R05-AFC34-S06FCA_HFS2S1 connector. The design incorporates multiple AZ5A23-01F ESD protection diodes in an ESD0201_0D65X0D35_0D3421 package for signal line protection. A FSA614 USB switch in a RAU217 package is present for signal routing. The sub-board operates on +3.3VS_F and VDD15 power rails, with decoupling provided by 1U-10-04R-K capacitors. The schematic provides a focused layout for the fingerprint sensor, its connector, and associated protection circuitry.
Technician FAQ
Q: What is the fingerprint sensor IC used on this sub-board?
A: The fingerprint sensor IC is the EM85F696A.
Q: What ESD protection ICs are used on this fingerprint board?
A: Multiple AZ5A23-01F ESD protection diodes are used, in an ESD0201_0D65X0D35_0D3421 package.
Q: What type of connector is used for the fingerprint sensor interface?
A: The connector is a CON_FFC_6R05-AFC34-S06FCA_HFS2S1, a 6-pin FFC connector with 0.5mm pitch.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
Technical Summary
The PF4NU1F motherboard is built on the AMD Renoir platform, utilizing an FP6 BGA 1140-pin APU. The system is managed by an IT8528E Embedded Controller in a 128-pin LQFP package. Audio is handled by the ALC269M codec, while the BQ24781 IC manages battery charging. The board supports two DDR4 SO-DIMM slots for memory expansion. Networking is provided by the RT8111EPV LAN controller. Storage and peripheral connectivity include an RTS5170-GR card reader and a GL850G-60 USB 2.0 hub. The system also features an NPCT750AABYX TPM 2.0 module and a PS8802 HDMI level shifter. The BIOS is stored on a 16MB SPI flash ROM.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The motherboard uses an IT8528E Embedded Controller in a 128-pin LQFP package.
Q: What is the charging IC on this board?
A: The charging IC is a BQ24781.
Q: What audio codec is used?
A: The audio codec is an ALC269M.
Q: What is the LAN IC on this motherboard?
A: The LAN IC is an RT8111EPV.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
Technical Summary
This motherboard is designed around the AMD Renoir APU platform, utilizing an FP6 BGA 1140-pin package. The system is powered by a BQ24781 charging IC and supports DDR4 SO-DIMM memory across two slots. The embedded controller is an IT8528E in a 128-pin LQFP package. Audio is handled by an ALC269Q codec, while networking is provided by an RTL8111EPV LAN IC. The board features a 16MB SPI BIOS flash. Additional integrated components include a GL850G-60 USB hub controller, an RTS5170-GR card reader, an NPCT750AABYX TPM module, and a PS8802 HDMI level shifter.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is an IT8528E in a 128-pin LQFP package.
Q: What is the charging IC on this motherboard?
A: The charging IC is a BQ24781.
Q: What audio codec is used on this motherboard?
A: The audio codec is an ALC269Q.
Q: What LAN IC is used on this motherboard?
A: The LAN IC is an RTL8111EPV.
Q: What is the memory configuration on this motherboard?
A: The motherboard supports DDR4 SO-DIMM memory across two slots.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
Technical Summary
The PF4NU1F motherboard is built on the AMD Renoir platform, utilizing an FP6 BGA 1140-pin APU. The system is managed by an IT8528E Embedded Controller in a 128-pin LQFP package. Audio is handled by the ALC269M codec, while charging is controlled by the BQ24781 IC. Networking is provided by the RT8111EPV LAN controller. The board supports two DDR4 SO-DIMM slots for memory expansion. Storage and peripheral connectivity include the RTS5170-GR card reader and GL850G-60 USB hub. Security is managed by the NPCT750AABYX TPM module. HDMI signal level shifting is performed by the PS8802 IC. The board documentation is identified by document number PF4NR1F, dated September 7, 2020.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The motherboard uses the IT8528E Embedded Controller in a 128-pin LQFP package.
Q: What is the charging IC on this board?
A: The charging IC is the BQ24781.
Q: What audio codec is used?
A: The audio codec is the ALC269M.
Q: What LAN controller is present?
A: The LAN controller is the RT8111EPV.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Document Number | APF4NR1F_FG_DBA22 |
| Date | Friday, August 14, 2020 |
| Fingerprint IC | EM85F696AP |
| Fingerprint IC Package | 52/SCK9P53/SS10P8011P81/SCL_2W12GNDS1P75/DM24P74/DP23VDD3322VDD1521OSCO20OSCI19P50/SDI7P51/SDO86P96/INT2/PWMCP94/INT0/PWMB54P93/SDA13P92/SCL12VDDIOLP90/SCL01P82/SDA_2W13P65/IRC_OUT14P66/T1/TX15P67/T0/RX16VDDIOH17VDD5018 |
| Fingerprint Connector | cnfp1 |
| Fingerprint Connector Type | FFC,6P,SMT,P0.5,W-FP00806-0A00,JCTC |
| Fingerprint Connector Model | CON_FFC_6R05-AFC34-S06FCA_HFS2S1 |
| Crystal | Y1FSX3M-16M1324 |
| TVS Diode | AZ5A23-01FE |
| TVS Diode Package | ESD0201_0D65X0D35_0D3421 |
| ESD Protection IC | FSA614RAU217 |
| ESD Protection IC Package | ESD_3NC_318 |
Technical Summary
This document, APF4NR1F_FG_DBA22, dated Friday, August 14, 2020, details a fingerprint sensor sub-board. The core component is the EM85F696AP fingerprint IC, which interfaces via a cnfp1 FFC connector (CON_FFC_6R05-AFC34-S06FCA_HFS2S1, 6-pin, 0.5mm pitch). The circuit includes a Y1FSX3M-16M1324 crystal oscillator for timing. Protection is provided by multiple AZ5A23-01FE TVS diodes in an ESD0201_0D65X0D35_0D3421 package and a single FSA614RAU217 ESD protection IC in an ESD_3NC_318 package. The board operates on +3.3VS_F and VDD15 power rails.
Technician FAQ
Q: What is the fingerprint sensor IC used on this board?
A: The fingerprint sensor IC is the EM85F696AP.
Q: What type of connector is used for the fingerprint sensor?
A: The connector is cnfp1, an FFC type with 6 pins, 0.5mm pitch, model CON_FFC_6R05-AFC34-S06FCA_HFS2S1.
Q: What protection components are used on this fingerprint board?
A: The board uses AZ5A23-01FE TVS diodes in an ESD0201_0D65X0D35_0D3421 package and one FSA614RAU217 ESD protection IC.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | BPF4NR1F_FG_DBA312 |
| Document Number | BPF4NR1F_FG_DBA312 |
| Date | Wednesday, September 02, 2020 |
| Fingerprint Sensor IC | EM85F696A |
| Fingerprint Sensor IC Package | P52/SCK9 P53/SS10 P8011 P81/SCL_2W12 GNDS1 P75/DM24 P74/DP23 VDD3322 VDD1521 OSCO20 OSCI19 P50/SDI7 P51/SDO86 P96/INT2/PWMCP94/INT0/PWMB54 P93/SDA13 P92/SCL12 VDDIOLP90/SCL01 P82/SDA_2W13 P65/IRC_OUT14 P66/T1/TX15 P67/T0/RX16 VDDIOH17 VDD5018 |
| Fingerprint Connector | CON_FFC_6R05-AFC34-S06FCA_HFS2S1 |
| ESD Protection IC | AZ5A23-01F |
| ESD Protection IC Package | ESD0201_0D65X0D35_0D3421 |
| USB Switch IC | FSA614 |
| USB Switch IC Package | RAU217 |
Technical Summary
This document, BPF4NR1F_FG_DBA312, dated Wednesday, September 02, 2020, details a fingerprint reader sub-board. The core component is the EM85F696A fingerprint sensor IC, which interfaces via a CON_FFC_6R05-AFC34-S06FCA_HFS2S1 connector. The design incorporates multiple AZ5A23-01F ESD protection diodes in an ESD0201_0D65X0D35_0D3421 package for signal line protection. A FSA614 USB switch in a RAU217 package is present for signal routing. The sub-board operates on +3.3VS_F and VDD15 power rails, with decoupling provided by 1U-10-04R-K capacitors. The schematic provides a focused layout for the fingerprint sensor, its connector, and associated protection circuitry.
Technician FAQ
Q: What is the fingerprint sensor IC used on this sub-board?
A: The fingerprint sensor IC is the EM85F696A.
Q: What ESD protection ICs are used on this fingerprint board?
A: Multiple AZ5A23-01F ESD protection diodes are used, in an ESD0201_0D65X0D35_0D3421 package.
Q: What type of connector is used for the fingerprint sensor interface?
A: The connector is a CON_FFC_6R05-AFC34-S06FCA_HFS2S1, a 6-pin FFC connector with 0.5mm pitch.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Project Name | PF4NU1F |
| Platform | AMD Renoir |
| Date | Friday, August 07, 2020 |
| Document Number | PF4NR1F |
| CPU Platform | AMD Renoir |
| APU | AMD Renoir |
| APU Package | FP6 BGA 1140pin 35mmX25mmX1.38mm |
| EC / KBC | IT8528E |
| EC/KBC Package | 128 Pin LQFP |
| Audio Codec | ALC269M |
| BIOS / SPI Flash | 16MB |
| Charging IC | BQ24781 |
| RAM Type | DDR4 |
| RAM Architecture | SO-DIMM |
| RAM Quantity / Slots | 2 |
| LAN IC | RT8111EPV |
| Card Reader IC | RTS5170-GR |
| USB Hub IC | GL850G-60 |
| TPM | NPCT750AABYX TPM 2.0 |
| HDMI Level Shifter | PS8802 |
Technical Summary
The PF4NU1F motherboard is built on the AMD Renoir platform, utilizing an FP6 BGA 1140-pin APU. The system is managed by an IT8528E Embedded Controller in a 128-pin LQFP package. Audio is handled by the ALC269M codec, while the BQ24781 IC manages battery charging. The board supports two DDR4 SO-DIMM slots for memory expansion. Networking is provided by the RT8111EPV LAN controller. Storage and peripheral connectivity include an RTS5170-GR card reader and a GL850G-60 USB 2.0 hub. The system also features an NPCT750AABYX TPM 2.0 module and a PS8802 HDMI level shifter. The BIOS is stored on a 16MB SPI flash ROM.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The motherboard uses an IT8528E Embedded Controller in a 128-pin LQFP package.
Q: What is the charging IC on this board?
A: The charging IC is a BQ24781.
Q: What audio codec is used?
A: The audio codec is an ALC269M.
Q: What is the LAN IC on this motherboard?
A: The LAN IC is an RT8111EPV.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Project Name | PF4NU1F |
| Platform | AMD Renoir |
| Date | Friday, August 14, 2020 |
| Document Number | PF4NR1F |
| CPU Platform | AMD Renoir |
| APU | AMD Renoir |
| APU Package | FP6 BGA 1140pin 35mmX25mmX1.38mm |
| EC / KBC | IT8528E |
| EC/KBC Package | 128 Pin LQFP |
| Audio Codec | ALC269Q |
| Audio Codec (Block Diagram) | ALC269M |
| BIOS / SPI Flash | 16MB |
| Charging IC | BQ24781 |
| RAM Type | DDR4 |
| RAM Architecture | SO-DIMM |
| RAM Quantity / Slots | 2 |
| LAN IC | RTL8111EPV |
| Card Reader IC | RTS5170-GR |
| USB Hub IC | GL850G-60 |
| TPM | NPCT750AABYX |
| HDMI Level Shifter | PS8802 |
Technical Summary
This motherboard is designed around the AMD Renoir APU platform, utilizing an FP6 BGA 1140-pin package. The system is powered by a BQ24781 charging IC and supports DDR4 SO-DIMM memory across two slots. The embedded controller is an IT8528E in a 128-pin LQFP package. Audio is handled by an ALC269Q codec, while networking is provided by an RTL8111EPV LAN IC. The board features a 16MB SPI BIOS flash. Additional integrated components include a GL850G-60 USB hub controller, an RTS5170-GR card reader, an NPCT750AABYX TPM module, and a PS8802 HDMI level shifter.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is an IT8528E in a 128-pin LQFP package.
Q: What is the charging IC on this motherboard?
A: The charging IC is a BQ24781.
Q: What audio codec is used on this motherboard?
A: The audio codec is an ALC269Q.
Q: What LAN IC is used on this motherboard?
A: The LAN IC is an RTL8111EPV.
Q: What is the memory configuration on this motherboard?
A: The motherboard supports DDR4 SO-DIMM memory across two slots.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Project Name | PF4NU1F |
| Platform | AMD Renoir |
| Document Number | PF4NR1F |
| Date | Monday, September 07, 2020 |
| CPU Platform | AMD Renoir |
| APU | AMD Renoir |
| APU Package | FP6 BGA 1140pin 35mmX25mmX1.38mm |
| EC / KBC | IT8528E |
| EC/KBC Package | 128 Pin LQFP |
| Audio Codec | ALC269M |
| Charging IC | BQ24781 |
| LAN IC | RT8111EPV |
| RAM Type | DDR4 |
| RAM Architecture | SO-DIMM |
| RAM Quantity / Slots | 2 |
| Card Reader IC | RTS5170-GR |
| USB Hub IC | GL850G-60 |
| TPM | NPCT750AABYX |
| HDMI Level Shifter | PS8802 |
Technical Summary
The PF4NU1F motherboard is built on the AMD Renoir platform, utilizing an FP6 BGA 1140-pin APU. The system is managed by an IT8528E Embedded Controller in a 128-pin LQFP package. Audio is handled by the ALC269M codec, while charging is controlled by the BQ24781 IC. Networking is provided by the RT8111EPV LAN controller. The board supports two DDR4 SO-DIMM slots for memory expansion. Storage and peripheral connectivity include the RTS5170-GR card reader and GL850G-60 USB hub. Security is managed by the NPCT750AABYX TPM module. HDMI signal level shifting is performed by the PS8802 IC. The board documentation is identified by document number PF4NR1F, dated September 7, 2020.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The motherboard uses the IT8528E Embedded Controller in a 128-pin LQFP package.
Q: What is the charging IC on this board?
A: The charging IC is the BQ24781.
Q: What audio codec is used?
A: The audio codec is the ALC269M.
Q: What LAN controller is present?
A: The LAN controller is the RT8111EPV.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited by a moderator:
