Salim Badakhshan
Registered
Tongfang PF4NU1F AMD FP6 Schematic
Technical Specifications
Technical Summary
This motherboard is based on the AMD Renoir platform with project code PF4PN2F and document number PF4NU1F, dated Friday, March 06, 2020. The system is powered by an AMD Renoir APU and features an IT8528E Embedded Controller in a 128 Pin LQFP package. Audio is handled by the ALC269Q-VC3-GR codec, while the BIOS/SPI flash is a 16MB ROM in a 28 Pin M-SOP package. The charging IC is a BQ24781, and memory configuration consists of two DDR4 SO-DIMM slots. The board integrates an RTS5170-GR card reader, a GL850G-60 USB 2.0 hub, an RTL8111G-CG LAN controller, and an NPCT750AAAYX TPM module.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The EC/KBC is an IT8528E in a 128 Pin LQFP package.
Q: What is the BIOS flash configuration?
A: The BIOS/SPI flash is a 16MB ROM in a 28 Pin M-SOP package.
Q: What charging IC is used?
A: The charging IC is a BQ24781.
Q: What is the memory architecture?
A: The memory architecture is DDR4 SO-DIMM with two slots.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
Technical Summary
The PF4NU1F model motherboard is documented at solution version 2.0, with a test phase designation of B phase. The document was issued on 2020/04/13 by Hsiang Liu. The technical content primarily consists of an EMI memo listing gasket and shielding components for assembly, including specific part numbers such as GSRGN51504-1901, GSRRG51113-1901, GSRRPC1001-1901, GSRRN41115-1901, GSRRWC1111-1901, GSRRG5Z106-1901, GSRGN52101-1901, GSRRG5ZK01-1901, GSRRP4F102-1901, GSRRP4F103-1901, and GSRRP4F101-1901. These components are applied to various chassis locations including the D case, A case, C case, audio DB connector, main BD connector (USB), main BD connector (Type C), main BD connector (DC IN), T'P module, and speaker areas.
Technician FAQ
Q: What is the model and solution version of this motherboard?
A: The model is PF4NU1F, with solution version 2.0.
Q: What is the test phase and issue date for this document?
A: The test phase is B phase, and the document was issued on 2020/04/13.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
Technical Summary
The PF4PN2F project is an AMD Renoir platform motherboard documented under schematic number PF4NU1F, dated March 6, 2020. The system is built around the AMD Renoir APU in a 35mm x 25mm BGA1140 package, supporting dual-channel DDR4 SO-DIMM memory at 3200MHz. Embedded controller functions are handled by an IT8528E in a 128-pin LQFP package, with a 16MB SPI BIOS ROM. Audio is provided by a Realtek ALC269Q-VC3-GR codec, and networking includes a Realtek RTL8111G-CG Gigabit LAN controller alongside a GPP 4 WLAN & BT module. Power management and charging are managed by a BQ24781 charger IC. Additional onboard controllers include a GL850G-60 USB 2.0 hub, an RTS5170-GR SD card reader, and an NPCT750AAAYX TPM 2.0 module. The block diagram also indicates support for HDMI 1.4, eDP, USB 3.1 Type-C, and an M.2 SSD interface.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The motherboard uses an IT8528E embedded controller in a 128-pin LQFP package.
Q: What BIOS flash configuration is used?
A: The system uses a 16MB SPI BIOS ROM.
Q: What charging IC is used?
A: The charging IC is a BQ24781.
Q: What audio codec is used?
A: The audio codec is a Realtek ALC269Q-VC3-GR.
Q: What LAN IC is used?
A: The LAN IC is a Realtek RTL8111G-CG.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Custom |
| Project Code | PF4PN2F |
| Platform | AMD Renoir |
| Date | Friday, March 06, 2020 |
| Document Number | PF4NU1F |
| CPU Platform | AMD Renoir |
| EC / KBC | IT8528E |
| EC/KBC Package | 128 Pin LQFP |
| Audio Codec | ALC269Q-VC3-GR |
| BIOS / SPI Flash | 16MB |
| BIOS Flash Package | 28 Pin M-SOP |
| Charging IC | BQ24781 |
| RAM Type | DDR4 |
| RAM Architecture | SO-DIMM |
| RAM Quantity / Slots | 2 |
| Card Reader IC | RTS5170-GR |
| USB Hub IC | GL850G-60 |
| LAN IC | RTL8111G-CG |
| WiFi / WLAN IC | GPP 4WLAN&BT |
| TPM | NPCT750AAAYX |
Technical Summary
This motherboard is based on the AMD Renoir platform with project code PF4PN2F and document number PF4NU1F, dated Friday, March 06, 2020. The system is powered by an AMD Renoir APU and features an IT8528E Embedded Controller in a 128 Pin LQFP package. Audio is handled by the ALC269Q-VC3-GR codec, while the BIOS/SPI flash is a 16MB ROM in a 28 Pin M-SOP package. The charging IC is a BQ24781, and memory configuration consists of two DDR4 SO-DIMM slots. The board integrates an RTS5170-GR card reader, a GL850G-60 USB 2.0 hub, an RTL8111G-CG LAN controller, and an NPCT750AAAYX TPM module.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The EC/KBC is an IT8528E in a 128 Pin LQFP package.
Q: What is the BIOS flash configuration?
A: The BIOS/SPI flash is a 16MB ROM in a 28 Pin M-SOP package.
Q: What charging IC is used?
A: The charging IC is a BQ24781.
Q: What is the memory architecture?
A: The memory architecture is DDR4 SO-DIMM with two slots.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | PF4NU1F |
| Test Phase | B phase |
| Date | 2020/04/13 |
| Solution Version | 2.0 |
Technical Summary
The PF4NU1F model motherboard is documented at solution version 2.0, with a test phase designation of B phase. The document was issued on 2020/04/13 by Hsiang Liu. The technical content primarily consists of an EMI memo listing gasket and shielding components for assembly, including specific part numbers such as GSRGN51504-1901, GSRRG51113-1901, GSRRPC1001-1901, GSRRN41115-1901, GSRRWC1111-1901, GSRRG5Z106-1901, GSRGN52101-1901, GSRRG5ZK01-1901, GSRRP4F102-1901, GSRRP4F103-1901, and GSRRP4F101-1901. These components are applied to various chassis locations including the D case, A case, C case, audio DB connector, main BD connector (USB), main BD connector (Type C), main BD connector (DC IN), T'P module, and speaker areas.
Technician FAQ
Q: What is the model and solution version of this motherboard?
A: The model is PF4NU1F, with solution version 2.0.
Q: What is the test phase and issue date for this document?
A: The test phase is B phase, and the document was issued on 2020/04/13.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Project Name | PF4PN2F |
| Platform | AMD Renoir |
| Document Number | PF4NU1F |
| Date | Friday, March 06, 2020 |
| CPU Platform | AMD Renoir |
| EC / KBC | IT8528E |
| EC/KBC Package | 128 Pin LQFP |
| Audio Codec | ALC269Q-VC3-GR |
| BIOS / SPI Flash | 16MB |
| Charging IC | BQ24781 |
| RAM Type | DDR4 |
| RAM Architecture | SO-DIMM |
| RAM Quantity / Slots | 2 |
| Card Reader IC | RTS5170-GR |
| USB Hub IC | GL850G-60 |
| LAN IC | RTL8111G-CG |
| WiFi / WLAN IC | GPP 4WLAN&BT |
| TPM | NPCT750AAAYX |
Technical Summary
The PF4PN2F project is an AMD Renoir platform motherboard documented under schematic number PF4NU1F, dated March 6, 2020. The system is built around the AMD Renoir APU in a 35mm x 25mm BGA1140 package, supporting dual-channel DDR4 SO-DIMM memory at 3200MHz. Embedded controller functions are handled by an IT8528E in a 128-pin LQFP package, with a 16MB SPI BIOS ROM. Audio is provided by a Realtek ALC269Q-VC3-GR codec, and networking includes a Realtek RTL8111G-CG Gigabit LAN controller alongside a GPP 4 WLAN & BT module. Power management and charging are managed by a BQ24781 charger IC. Additional onboard controllers include a GL850G-60 USB 2.0 hub, an RTS5170-GR SD card reader, and an NPCT750AAAYX TPM 2.0 module. The block diagram also indicates support for HDMI 1.4, eDP, USB 3.1 Type-C, and an M.2 SSD interface.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The motherboard uses an IT8528E embedded controller in a 128-pin LQFP package.
Q: What BIOS flash configuration is used?
A: The system uses a 16MB SPI BIOS ROM.
Q: What charging IC is used?
A: The charging IC is a BQ24781.
Q: What audio codec is used?
A: The audio codec is a Realtek ALC269Q-VC3-GR.
Q: What LAN IC is used?
A: The LAN IC is a Realtek RTL8111G-CG.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited by a moderator:
